GE BZW04P14 Transzorbâ ¢ transient voltage suppressor Datasheet

BZW04P-5V8 THRU BZW04-376
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.8 to 376 Volts
Peak Pulse Power - 400 Watts
FEATURES
DO204AL
1.0 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junction
♦ 400W peak pulse power
capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
♦ Excellent clamping
capability
♦ Low incremental surge resistance
♦ Fast response time: typically less
than 1.0 ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bi-directional types
♦ Typical ID less than 1µA above 10V rating
♦ High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
0.034 (0.86)
0.028 (0.71)
DIA.
MECHANICAL DATA
NOTE: Lead diameter is 0.026 (0.66)
0.023 (0.58)
for suffix "E" part numbers
Dimensions are in inches
and
(millimeters)
Case: JEDEC DO-204AL molded plastic over passivated
junction
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: For unidirectional types the color band denotes
the cathode, which is postitive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use add suffix Letter "B" (e.g. BZW04P-6V4B).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs waveform
(NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths, 0.375” (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
Sine-wave superimposed on rated load
(JEDEC Method) (NOTE 3) unidirectional only
Maximum instantaneous forward voltage at 25A
uni-directional only
(NOTE 4)
Operating junction and storage temperature range
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
(4) VF=3.5V max. for devices of V(BR)≤220V and VF=5.0 Volt max. for devices of V(BR)>220V
1/5/98
SYMBOL
VALUE
UNITS
PPPM
Minimum 400
Watts
IPPM
SEE TABLE 1
Amps
PM(AV)
1.0
Watts
IFSM
40.0
Amps
VF
3.5/5.0
Volts
TJ, TSTG
-55 to +175
°C
ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1
Breakdown Voltage
V(BR)
Volts (NOTE 1)
Device Type
MIN
MAX
Test
Current
at IT
(mA)
BZW04P5V8
BZW04-5V8
BZW04P6V4
BZW04-6V4
BZW04P7V0
BZW04-7V0
BZW04P7V8
BZW04-7V8
BZW04P8V5
BZW04-8V5
BZW04P9V4
BZW04-9V4
BZW0P10
BZW04-10
BZW04P11
BZW04-11
BZW04P13
BZW04-13
BZW04P14
BZW04-14
BZW04P15
BZW04-15
BZW04P17
BZW04-17
BZW04P19
BZW04-19
BZW04P20
BZW04-20
BZW04P23
BZW04-23
BZW04P26
BZW04-26
BZW04P28
BZW04-28
BZW04P31
BZW04-31
BZW04P33
BZW04-33
BZW04P37
BZW04-37
BZW04P40
BZW04-40
BZW04P44
BZW04-44
BZW04P48
BZW04-48
6.45
6.45
7.13
7.13
7.79
7.79
8.65
8.65
9.50
9.50
10.5
10.5
11.4
11.4
12.4
12.4
14.3
14.3
15.2
15.2
17.1
17.1
19.0
19.0
20.9
20.9
22.8
22.8
25.7
25.7
28.5
28.5
31.4
31.4
34.2
34.2
37.1
37.1
40.9
40.9
44.7
44.7
48.5
48.5
53.2
53.2
7.48
7.14
8.25
7.88
9.02
8.61
10.0
9.55
11.0
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22.0
21.0
24.2
23.1
26.4
25.2
29.7
28.4
33.0
31.5
36.3
34.7
39.6
37.8
42.9
41.0
47.3
45.2
51.7
49.4
56.1
53.6
61.6
58.8
10.0
10.0
10.0
10.0
10.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Stand-off
Voltage
VWM
(Volts)
Maximum
Reverse
Leakage
at VWM
ID (µA)
Maximum
Peak Pulse
Current
IPPM
(Amps)
(NOTE 2)
Maximum
Clamping
Voltage at
IPPM
VC (Volts)
38.0
38.0
35.4
35.4
33.0
33.0
30.0
30.0
27.6
27.6
25.7
25.7
24.0
24.0
22.0
22.0
19.0
19.0
17.8
17.8
16.0
16.0
14.5
14.5
13.0
13.0
12.0
12.0
10.7
10.7
9.6
9.6
8.8
8.8
8.0
8.0
7.4
7.4
6.7
6.7
6.2
6.2
5.7
5.7
5.2
5.2
10.5
10.5
11.3
11.3
12.1
12.1
13.4
13.4
14.5
14.5
15.6
15.6
16.7
16.7
18.2
18.2
21.2
21.2
22.5
22.5
25.2
25.2
27.7
27.7
30.6
30.6
33.2
33.2
37.5
37.5
41.5
41.5
45.7
45.7
49.9
49.9
53.9
53.9
59.3
59.3
64.8
64.8
70.1
70.1
77.0
77.0
Maximum
Temperature
Coefficient
of V(BR)
(% / C)
(NOTE4)
5.80
5.80
6.40
6.40
7.02
7.02
7.78
7.78
8.55
8.55
9.4
9.4
10.2
10.2
11.1
11.1
12.8
12.8
13.6
13.6
15.3
15.3
17.1
17.1
18.8
18.8
20.5
20.5
23.1
23.1
25.6
25.6
28.2
28.2
30.8
30.8
33.3
33.3
36.8
36.8
40.2
40.2
43.6
43.6
47.8
47.8
1000
1000
500
500
200
200
50.0
50.0
10.0
10.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.057
0.057
0.061
0.061
0.065
0.065
0.068
0.073
0.073
0.075
0.075
0.075
0.078
0.078
0.081
0.081
0.084
0.084
0.086
0.086
0.088
0.088
0.090
0.090
0.092
0.092
0.094
0.094
0.096
0.096
0.097
0.097
0.098
0.098
0.099
0.099
0.100
0.100
0.101
0.101
0.101
0.101
0.102
0.102
0.103
0.103
ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 (Cont’d)
Breakdown Voltage
V(BR)
Volts (NOTE 1)
Device Type
MIN
MAX
BZW04P53
BZW04-53
BZW04P58
BZW04-58
BZW04P64
BZW04-64
BZW04P70
BZW04-70
BZW04P78
BZW04-78
BZW04P85
BZW04-85
BZW04P94
BZW04-94
BZW04P102
BZW04-102
BZW04P110
BZW04-110
BZW04P128
BZW04-128
BZW04P136
BZW404-136
BZW04P145
BZW04-145
BZW04P154
BZW04-154
BZW04P171
BZW04-171
BZW04P188
BZW04-188
BZW04P213
BZW04-213
BZW04P239
BZW04-239
BZW04P256
BZW04-256
BZW04P273
BZW04-273
BZW04P299
BZW04-299
BZW04P342
BZW04-342
BZW04P376
BZW04-376
58.9
58.9
64.6
64.6
71.3
71.3
77.9
77.9
86.5
86.5
95.0
95.0
105
105
114
114
124
124
143
143
152
152
161
161
171
171
190
190
209
209
237
237
266
266
285
285
304
304
332
332
380
380
418
418
68.2
65.1
74.8
71.4
82.5
78.8
90.2
86.1
100
95.5
110
105
121
116
132
126
143
137
165
158
176
168
187
179
198
189
220
210
242
231
275
263
308
294
330
315
352
336
385
368
440
420
484
462
Test
Current
at IT
(mA)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Stand-off
Voltage
VWM
(Volts)
Maximum
Reverse
Leakage
at VWM
ID (µA)
Maximum
Peak Pulse
Current
IPPM
(Amps)
(NOTE 2)
Maximum
Clamping
Voltage at
IPPM
VC (Volts)
4.7
4.7
4.3
4.3
3.9
3.9
3.5
3.5
3.2
3.2
2.9
2.9
2.6
2.6
2.4
2.4
2.2
2.2
2.0
2.0
1.8
1.8
1.7
1.7
1.6
1.6
1.5
1.5
1.4
1.4
1.5
1.5
1.5
1.5
1.2
1.2
1.2
1.2
0.90
0.90
0.90
0.90
0.80
0.80
85.0
85.0
92.0
92.0
103
103
113
113
125
125
137
137
152
152
165
165
179
179
207
207
219
219
234
234
246
246
274
274
301
301
344
344
384
384
414
414
438
438
482
482
548
548
603
603
Maximum
Temperature
Coefficient
of V(BR)
(% / C)
(NOTE4)
53.0
53.0
58.1
58.1
64.1
64.1
70.1
70.1
78.0
78.0
85.5
85.5
94.0
94.0
102
102
111
111
128
128
136
136
145
145
154
154
171
171
188
188
213
213
239
239
256
256
273
273
299
299
342
342
376
376
NOTES:
(1) V(BR) measured after IT applied for 300µs IT=square wave pulse or equivalent
(2) Surge current waveform per Fig. 3 and derated per Fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
(4) For bi-directional devices with VWM of 10 Volts and less, the ID limit is doubled
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.104
0.104
0.104
0.104
0.105
0.105
0.105
0.105
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
RATINGS AND CHARACTERISTIC CURVES BZW04P5V8 THRU BZW04-376
FIG. 2 - PULSE DERATING CURVE
PEAK PULSE POWER (PPP) OR CURRENT (IPP)
DERATING IN PERCENTAGE, %
PPPM, PEAK PULSE POWER, kW
FIG. 1 - PEAK PULSE POWER RATING CURVE
100
NON-REPETITIVE
PULSE WAVEFORM
SHOWN in FIG. 3
TA=25°C
10
1.0
0.1
0.1µs
10µs
1.0µs
100µs
1.0ms
10ms
td, PULSE WIDTH, sec.
PEAK VALUE
IPPM
25
0
25
0
50
75
100
125 150
175 200
100
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
UNIDIRECTIONAL
100,000
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
HALF VALUE - IPP
2
10/1000µsec. WAVEFORM
AS DEFINED BY R.E.A.
50
CJ, JUNCTION CAPACITANCE, pF
PPPM, PEAK PULSE CURRENT, %
50
TA, AMBIENT TEMPERATURE, °C
TA=25°C
PULSE WIDTH (td) is
DEFINED as the POINT
WHERE the PEAK
CURRENT DECAYS
to 50% of IPP
tr=10µsec.
0
td
4.0
3.0
2.0
1.0
0
t, TIME, ms
FIG. 5 - STEADY STATE POWER DERATING CURVE
1.00
L
60 HZ
RESISTIVE OR INDUCTIVE LOAD
10,000
1000
MEASURED at
ZERO BIAS
MEASURED at
STAND-OFF
VOLTAGE, VWM
= 0.375”(9.5mm)
LEAD LENGTH
0.75
10
0.50
1.0
10
100
200
V(BR), BREAKDOWN VOLTAGE, VOLTS
1.6 x 1.6 x 0.040"
(40 x 40 x 1mm.)
COPPER HEAT SINKS
0.25
0
0
25
50
75
100
125
150
175
IFSM, PEAK FORWARD SURGE CURRENT,
AMPERES
PM(AV), STEADY STATE POWER DISSIPATION, WATTS
75
FIG. 3 - PULSE WAVEFORM
150
200
TL, LEAD TEMPERATURE,°C
FIG. 7-TYPICAL REVERSE LEAKAGE CHARACTERISTICS
ID, INSTANTANEOUS REVERSE LEAKAGE
CURRENT, MICROAMPERES
100
100
MEASURED at
DEVICES
STAND-OFF
VOLTAGE, VWM
10
TA=25°C
1
FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT UNIDIRECTIONAL
50
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TJ=TJ max.
40
30
20
10
0
1
10
NUMBER OF CYCLES AT 60 HZ
0.1
0.01
0
100
200
300
400
V(BR), BREAKDOWN VOLTAGE, VOLTS
500
100
Similar pages