asd105 I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters series Low Ripple and Noise Regulated Outputs 500V Isolation Short Circuit Protection Standard Pinouts Input PI Filter Unit measures 0.8”W x 1.25”L x 0.4”H Model Number Output Voltage SINGLE OUTPUT ASD105-5S5 5 VDC ASD105-12S5 ASD105-24S5 ASD105-28S5 ASD105-48S5 ASD105-5S12 12 VDC ASD105-12S12 ASD105-24S12 ASD105-28S12 ASD105-48S12 ASD105-5S15 15 VDC ASD105-12S15 ASD105-24S15 ASD105-28S15 ASD105-48S15 Output mAmps Input Range 300 300 300 300 300 125 125 125 125 125 100 100 100 100 100 4.5-5.5 VDC 10.8-13.2 VDC 21.6-26.4 VDC 25.2-30-8 VDC 43.2-52.8 VDC 4.5-5.5 VDC 10.8-13.2 VDC 21.6-26.4 VDC 25.2-30-8 VDC 43.2-52.8 VDC 4.5-5.5 VDC 10.8-13.2 VDC 21.6-26.4 VDC 25.2-30-8 VDC 43.2-52.8 VDC DUAL OUTPUT ASD105-5D12 +/-12 VDC +/-60 4.5-5.5 VDC ASD105-12D12 +/-60 10.8-13.2 VDC ASD105-24D12 +/-60 21.6-26.4 VDC ASD105-28D12 +/-60 25.2-30-8 VDC ASD105-48D12 +/-60 43.2-52.8 VDC ASD105-5D15 +/-15 VDC +/-50 4.5-5.5 VDC ASD105-12D15 +/-50 10.8-13.2 VDC ASD105-24D15 +/-50 21.6-26.4 VDC ASD105-28D15 +/-50 25.2-30-8 VDC ASD105-48D15 +/-50 43.2-52.8 VDC Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters INPUT SPECIFICATIONS Input Voltage Ranges: Input Filter series ENVIRONMENTAL SPECIFICATIONS 5 VDC Nominal 12 VDC Nominal 24 VDC Nominal 28 VDC Nominal 48 VDC Nominal PI Type 4.5-5.5 VDC 10.8-13.2 VDC 21.6-26.4 VDC 25.2-30.8 VDC 43.2-52.8 VDC OUTPUT SPECIFICATIONS Voltage and Current Load Regulation Line Regulation (HL-LL) Temperature Coefficient Ripple/Noise(Single/Dual) Voltage Accuracy Short Circuit Protection Efficiency asd105 See Selection Chart 20% to FL +/- 0.3% +/-0.02%/°C 50mVp-p max. +/- 4% 1 second max. 50% Oper. Temperature Case Temperature Storage Temperature Cooling MTBF -25 to +71°C 100°C max. -40 to +100°C * Free Air Convection Single O/P 1,024,000 Hrs. Dual O/P 937,000 Hrs. MIL-HDBK-217F Ground Benign, 25°C PHYSICAL SPECIFICATIONS +/- 0.5% Case Material Construction Weight Dimensions Black coated Copper w. Non-conductive base Fully Encapsulated 0.5 oz, (13g) 1.25” x 0.8” x 0.4” GENERAL SPECIFICATIONS Input-Output Isolation Isolation Resistance Isolation Capacitance Switching Frequency 500VDC 10-9nth Ohm min. 30pF 20Khz All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 asd105 I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters series MECHANICAL DIMENSIONS Pin #Single OutputsDual Outputs 1 2 3 10 11 12 13 14 15 22 23 24 WWW.ASTRODYNE.COM + Input NC NC - Output + Output - Input - Input + Output - Output NC NC + Input + Input - Output Common Common + Output - Input - Input + Output Common Common - Output + Input 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181