STD MOUNTING FLOAT MOUNTING LAY OUT OF 50P CONNECTOR ORDERING INFORMATION SEE NOTE D B V 25 P 0 64 C T X B XXX LF SERIES LEAD FREE SHELL SIZE SPECIAL CODES E,A,B,C,D INSULATOR COLOUR OPTIONS BLANK- NATURAL B - BLACK BLANK-STANDARD F-FLOAT MOUNTING DIMPLES V-FEM. SCREW LOCK HEX. (UNC) N-THREADED FEM. SCREW LOCK M3 L-CLINCH NUT (M3) VIEW OF MATING FACE "This LF product meets European Union Directives and other country regulations as described in GS-22-008" Packaging as per GS-14-920 X-ON MALE CONNECTORS ONLY W-RIVETED FEM. SCREW LOCK ROUND UNC SHELL PLATING O-CLINCH NUT (UNC) BLANK-ZINC T-STD. TIN / Cu NO.OF CONTACTS 09,15,25,37,50 OPTIONS CONTACTS BLANK-STANDARD P - PIN S - SOCKET TECHNICAL SPECIFICATIONS H-SHIELDING TERMINATION FINGERS G-HARPOON TERMINATION TYPE M-METAL BRACKET C-WITHOUT BRACKET 0 / BLANK - SOLDER BUCKET CONTACT PLATING SHELLS : TIN/CADMIUM/ZINC PLATED STEEL CONTACTS DIA ON ACTIVE AREA : Ø1 MM. CONTACTS MATERIAL : COPPER ALLOY CONTACT PLATING : GOLD OVER NICKEL (ACTIVE ZONE) BLANK-0.2 Au 64 - Au FLASH 65 - 0.75 Au 67 - 0.4 Au : TINLEAD OVER NICKEL (TERMINATION ZONE) FOR LEAD FREE PLATING : 2 MIN.MATTE TIN TOP OVER 1.27 MIN. NICKEL UNDER PLATE(ON TERMINATION ZONE) INSULATOR MATERIAL SELF EXTINGUISHING THERMOPLASTICTO UL CLASS 94 V0 THE HOUSING WILL WITHSTAND EXPOSURE TO 260-265°C IF WE USE PROTECTIVE ADHESIVE (Kapton or Teflon)OR PROTECTIVE METALLIC DEVICE OPERATING TEMPERATURE -55°C +125°C OPERATING CURRENT 5 A PER CONTACT CONTACT RESISTANCE <10m INSULATION RESISTANCE >5000 M MAXIMUM VOLTAGE 1000 V.r.m.s MECHANICAL ENDURANCE DAMP HEAT 200 MATINGS . 21 DAYS. 2 0.6 MM (AWG 20) MAX. WIRE SIZE REFER TECHNICAL SPECIFICTIONS LINEAR ANGULAR ±1° Mini K Vandanath Elias C Thomas 20/03/1999 20/03/1999 George V Joseph 28/12/2004 K Somasundaram 28/12/2004 D-SUB D- SUB SOLDER BUCKET CONNECTOR e 28/12/2004 (WITH ASSEMBLY OPTIONS) LEAD FREE DETAILS ADDED e I04-0127 GVJ 28/12/04 PDM: Rev:E A2 C-D-SUB-0064 e D SERIES STATUS:Released Printed: Sep 28, 2005.