Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HB Type : V Long life HB 5.5 mm max. ↑ Low profile HA Features ● Endurance: 105 °C 2000 h ● 5.8 mm height (< 06.3), 5.5 mm height max. ● Vibration-proof product is available upon request. ● RoHS compliant (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance –40 °C to +105 °C 4 V.DC to 50 V.DC 1 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Leakage current (Bi-polar I < 0.02 CV or 6 (µA) after 2 minutes) Dissipation factor (tan d) Please see the attached characteristics list V.DC 4 6.3 10 16 25 35 50 Characteristics Z(–25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 (Impedance ratio at 120 Hz) at low temperature Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value (4 V.DC : ±35 % 6.3 V.DC : ±25 % 04 to 06.3), 5.5 mm max. : ±25 % Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, Shelf life capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20°C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10 % of the initial value tan d Within the initial limit soldering heat DC leakage current Within the initial limit AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 10 k to 1.70 0.3 max. Mark for Lead-Free products (Black dot) Rated Voltage code 4 6.3 10 16 25 35 50 g j A C E V H (P) (I) W Pressure Relief (010 and larger) Series identification (HP : Bi-polar) (BS : 5.5 mm max.) Lot number + L Capacitance (µF) A±0.2 B±0.2 H 0D±0.5 Negative polarity marking (–) (No marking for the bi-polar) 47 g HB – (I) Dimensions Example : 4 V.DC 47 µF Marking color : BLACK R. Voltage (V.DC) Code 1k 1.30 K Marking 120 1.00 ( ) Reference size (Unit : mm) Size L A, B code 0D B 4.0 5.8±0.3 4.3 C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 E 8.0 6.2±0.3 8.3 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 H I W P K 5.5 max. 6.5 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 ● 5.5 Size code B C D P K mm height max. 0D L A, B H I W 4.0 5.0 6.3 5.4+- 0.1 0.2 5.4+- 0.1 0.2 5.4+- 0.1 0.2 4.3 5.3 6.6 5.5 max. 6.5 max. 7.8 max. 1.8 2.2 2.6 0.65±0.1 0.65±0.1 0.65±0.1 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4 6.3 10 16 50 Size code 47 4 5.8 B 5 5.8 C 61 Min. Packaging Q'ty Part No. Reflow Taping (pcs) EEEHB0G470R (1) 2000 0.50 EEEHB0G101R (1) 1000 150 6.3 5.8 D 82 0.50 EEEHB0G151P (1) 1000 220 6.3 5.8 D 82 0.50 EEEHB0G221P (1) 1000 22 4 5.8 B 26 0.30 EEEHB0J220R (1) 2000 33 4 5.8 B 29 0.30 EEEHB0J330R (1) 2000 5 5.8 C 46 0.30 EEEHB0J470R (1) 1000 100 6.3 5.8 D 71 0.30 EEEHB0J101P (1) 1000 47 220 8 10.2 F 150 0.35 EEEHB0J221P (2) 500 330 8 10.2 F 230 0.35 EEEHB0J331P (2) 500 33 5 5.8 C 43 0.22 EEEHB1A330R (1) 1000 100 8 6.2 E 110 0.26 EEEHB1A101P (2) 1000 220 8 10.2 F 160 0.26 EEEHB1A221P (2) 500 470 10 10.2 G 270 0.26 EEEHB1A471P (2) 500 10 4 5.8 B 28 0.16 EEEHB1C100R (1) 2000 22 5 5.8 C 39 0.16 EEEHB1C220R (1) 1000 47 6.3 5.8 D 70 0.16 EEEHB1C470P (1) 1000 100 8 10.2 F 120 0.20 EEEHB1C101P (2) 500 220 10 10.2 G 210 0.20 EEEHB1C221P (2) 500 330 10 10.2 G 230 0.20 EEEHB1C331P (2) 500 4 5.8 B 22 0.14 EEEHB1E4R7R (1) 2000 4 5.8 B 25 0.14 EEEHB1E6R8R (1) 2000 33 6.3 5.8 D 65 0.14 EEEHB1E330P (1) 1000 47 8 6.2 E 91 0.16 EEEHB1E470P (2) 1000 100 8 10.2 F 130 0.16 EEEHB1E101P (2) 500 220 10 10.2 G 190 0.16 EEEHB1E221P (2) 500 10 5 5.8 C 28 0.12 EEEHB1V100R (1) 1000 22 6.3 5.8 D 55 0.12 EEEHB1V220P (1) 1000 6.8 35 L 100 4.7 25 0D Specification Ripple current tan d (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 34 0.50 33 8 6.2 E 84 0.14 EEEHB1V330P (2) 1000 47 8 10.2 F 98 0.14 EEEHB1V470P (2) 500 100 10 10.2 G 160 0.14 EEEHB1V101P (2) 500 1 4 5.8 B 10 0.12 EEEHB1H1R0R (1) 2000 2.2 4 5.8 B 16 0.12 EEEHB1H2R2R (1) 2000 3.3 4 5.8 B 16 0.12 EEEHB1H3R3R (1) 2000 4.7 5 5.8 C 23 0.12 EEEHB1H4R7R (1) 1000 6.8 10 5 5.8 C 23 0.12 EEEHB1H6R8R (1) 1000 6.3 5.8 D 35 0.12 EEEHB1H100P (1) 1000 22 8 6.2 E 70 0.12 EEEHB1H220P (2) 1000 33 8 10.2 F 91 0.12 EEEHB1H330P (2) 500 47 10 10.2 G 100 0.12 EEEHB1H470P (2) 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list (Bi-polar) Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 0D L Size code Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 35 0.60 Min. Packaging Q'ty Part No. Reflow Taping (pcs) 47 6.3 5.8 D EEEHP0J470P (1) 1000 10 4 5.8 B 20 0.44 EEEHP1A100R (1) 2000 33 6.3 5.8 D 26 0.44 EEEHP1A330P (1) 1000 10 5 5.8 C 25 0.32 EEEHP1C100R (1) 1000 3.3 4 5.8 B 12 0.28 EEEHP1E3R3R (1) 2000 4.7 4 5.8 B 12 0.28 EEEHP1E4R7R (1) 2000 10 6.3 5.8 D 28 0.28 EEEHP1E100P (1) 1000 22 6.3 5.8 D 55 0.28 EEEHP1E220P (1) 1000 2.2 4 5.8 B 10 0.24 EEEHP1V2R2R (1) 2000 1 4 5.8 B 10 0.24 EEEHP1H1R0R (1) 2000 3.3 6.3 5.8 D 16 0.24 EEEHP1H3R3P (1) 1000 4.7 6.3 5.8 D 23 0.24 EEEHP1H4R7P (1) 1000 Characteristics list (5.5 mm max.) Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 0D L Size code 22 4 5.4 B 47 5 5.4 C Specification Ripple current tan d (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 26 0.30 Min. Packaging Q'ty Part No. Reflow Taping (pcs) EEEHB0J220SR (1) 2000 46 0.30 EEEHB0J470SR (1) 1000 6.3 5.4 D 71 0.30 EEEHB0J101SP (1) 1000 10 33 5 5.4 C 43 0.22 EEEHB1A330SR (1) 1000 10 4 5.4 B 28 0.16 EEEHB1C100SR (1) 2000 16 22 5 5.4 C 39 0.16 EEEHB1C220SR (1) 1000 47 6.3 5.4 D 70 0.16 EEEHB1C470SP (1) 1000 100 25 35 50 4.7 4 5.4 B 22 0.14 EEEHB1E4R7SR (1) 2000 6.8 4 5.4 B 25 0.14 EEEHB1E6R8SR (1) 2000 33 6.3 5.4 D 65 0.14 EEEHB1E330SP (1) 1000 10 5 5.4 C 28 0.12 EEEHB1V100SR (1) 1000 22 6.3 5.4 D 55 0.12 EEEHB1V220SP (1) 1000 1 4 5.4 B 10 0.12 EEEHB1H1R0SR (1) 2000 2.2 4 5.4 B 16 0.12 EEEHB1H2R2SR (1) 2000 3.3 4 5.4 B 16 0.12 EEEHB1H3R3SR (1) 2000 4.7 5 5.4 C 23 0.12 EEEHB1H4R7SR (1) 1000 6.8 5 5.4 C 23 0.12 EEEHB1H6R8SR (1) 1000 6.3 5.4 D 35 0.12 EEEHB1H100SP (1) 1000 10 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016