DIODE MODULE DD(KD)60GB40/80 UL;E76102 （M） Power Diode Module DD60GB series are designed for various rectifier circuits. DD60GB has two diode chips connected in series and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 800V is avaiable for various input voltage. ● Two ２ １ 1 + 23 – 23 3M5 21 DD ３ 2- 6.5 2 ~ 16.5 30MAX （Applications） Various rectifiers, Battery chargers, DC motor drives 3 13 mounting base elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability 26MAX ● Isolated 93.5MAX 80 ２ ３ １ KD Unit：a ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Ratings Item DD60GB40 DD60GB80 Unit VRRM Repetitive Peak Reverse Voltage 400 800 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 V Symbol Item Conditions Ratings Unit IF（AV） Average Forward Current Single phase, half wave, 180°conduction, Tc：114℃ 60 A IF (RMS) R.M.S. Forward Current Single phase, half wave, 180°conduction, Tc：114℃ 95 A Surge Forward Current 1 ／2 cycle, I2t I2t Value for one cycle of surge current IFSM Tj Junction Temperature Tstg Storage Temperature VISO Isolation Voltage Mounting Torque 50/60HZ, peak value, non-repetitive A.C.1minute A 1100/1200 6000 A2S −40 to ＋150 ℃ −40 to ＋125 ℃ 2500 V Mounting（M6） Recommended Value 2.5-3.9（25-40） 4.7（48） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） N･m （㎏f･B） 170 g Ratings Unit 20 mA Mass ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VFM Forward Voltage Drop, max. Foward current 180A，Tj＝25℃，Inst. measurement 1.25 V Junction to case 0.50 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions VDRM, single phase, half wave. Tj＝150℃ ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DD(KD)60GB40/80 Maximum Forward Characteristics １２０ Power Dissipation Pav（W） １０３ ２ ２ １０ ５ ２ 1 １０ ５ ０． ６ １． ０ ０． ８ １． ２ １． ４ １． ６ １． ８ ２． ０ Per one element １００ D.C. Max. ８０ Single Phase Three Phase ６０ ４０ ２０ ０ ０ ２． ２ ２０ Average Forward Current vs. Allowable Case Temperature １２００ Surge Forward Current（A） Allowable Case Temperature Tc（℃） １５０ ４０ ６０ １４０ １２０ １１０ １００ Single Phase Three Phase D.C. ９０ ８０ ０ ２０ ４０ ６０ １２０ １４０ １６０ Per one element Ｔ ｊ=２５℃ start ８０ ８００ 60Hz ６００ 50Hz ４００ ２００ ０ １ １００ ２ ５ Average Forward Current（A） １０ ２０ ５０ １００ Time（Cycles） Transient Thermal Impedance ０． ６ ０． ５ １００ ２ ５ １０１ Junction to Case Per one element ０． ４ ０． ３ ０． ２ Maximum ０． １ ６００ １０−３ ２ ５ １０−２ ２ ５ １０−１ ２ Time t（sec） Output Current ５ １００ B２；Two Pluse Bridge connection Id（Aav.） ５００ Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W ４００ ３００ １１０ B2 １２０ ２００ １３０ １００ ０ １４０ ５０ １００ １５０ ２００ Output Current（A） ０ ２５ ５０ １５０ ７５ １００ １２５ １５０ Ambient Temperature（℃） ６００ Total Power Dissipation（W） ０ Allowable Case Temperature（℃） Transient Thermal Impedance θj-c（℃/W） １００ Cycle Surge Forward Current Rating （Non-Repetitive） １０００ Per one element １３０ Total Power Dissipation（W） ８０ Average Forward Current（A） Forward Voltage Drop（V） B６；Six pulse Bridge connection Output Current B6 Id（Aav.） ５００ ４００ B6 Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W １１０ １２０ ３００ １３０ ２００ １４０ １００ ０ ０ ５０ １００ １５０ ２００ ０ ２５ ５０ Allowable Case Temperature（℃） Forward Current（A） ５ Average Forward Current vs. Power Dissipation １５０ ７５ １００ １２５ １５０ Output Current（A） Ambient Temperature（℃） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]