High Power LED lamp BL-HP20AxxxL-3W n Features: Ø Ø Ø Ø Ø Ø Ø 1W and 3W, 5W LEDs suitable for illumination lamps and decorative lighting Longer service and less luminosity loss, 50,000hours Different emitting colors are available Working current: 200-350mA, 700mA, 1050mA With or without heat sink are both available Lambertian, batwing and side emitting are all available Light output from 20 to 170 lumens n Applications: Commercial lighting Residential lighting Decorative lighting n Electrical-optical characteristics: (Ta=25°C) 3Watt Lambertian 3W Star Lambertian type (Test Condition: IF=700mA) with Chip λP (nm) or CTT Emitted Color Part Number Lens Type Forward Voltage(VF) Unit:V Flux Unit:lm @700mA Typ Max Min. Typ. BL-HP20AUECL-3W Ultra Orange 630 2.2 2.75 40 50 BL-HP20AUYCL-3W Ultra Yellow 590 2.2 2.75 50 55 BL-HP20APGCL-3W Ultra Pure Green 525 3.5 3.8 70 90 BL-HP20ABGCL-3W Ultra Bluish Green 505 3.5 3.8 70 90 BL-HP20AUBCL-3W Ultra Blue 470 3.5 3.8 15 20 BL-HP20AUWCL-3W Ultra White 6000k 3.5 3.8 50 60 BL-HP20AUW2CL-3W Ultra Warm White 3200k 3.5 3.8 40 50 n Water Clear View ing Angl e 2?1/2 (deg) 140 Absolute maximum ratings (Ta=25°C) Parameter UE Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG Lead Soldering Temperature T SOL UY BG PG UB UW Unit mA 30 65 5 30 65 5 30 110 5 30 110 5 30 120 5 30 120 5 mW 150 150 150 150 100 100 mA V -40 to +80 -40 to +85 ℃ Ma x.260±5℃ for 3 sec Max. (1.6mm from the base of the epoxy bulb) ℃ APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V. 3 Page 1 of 3 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] ℃ High Power LED lamp BL-HP20AxxxL-3W ■ Package configuration & Internal circuit diagram Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is ±0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V. 3 Page 2 of 3 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] High Power LED lamp BL-HP20AxxxL-3W ■ Typical electrical-optical characteristics curves: (A) 1.0 (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 0.5 0 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH(λ p ) (1) - GaAsP/GaAs 655nm/Red (9) - GaAlAs 880nm (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (6) - GaAlAs/GaAs 660nm/Super Red (D) - InGaAl/SiC 525nm/Ultra Green (8) - GaAsP/GaP 610nm/Super Red 8 64 5 2 3 40 30 20 10 0 1.2 1.6 2.0 2.4 2.6 3.0 4.0 3.0 2.0 1.0 0 20 60 80 40 30 20 1 6 2,4,8,A 3 5 10 0 100 20 0.2 4 3 2 -20 -10 0 10 20 30 40 50 60 80 100 4 3 2 70 1 AMBIENT TEMPERATURE Ta(℃ ) 60 30KHz 3KHz 300Hz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 Ipeak M AX. IDC MAX. 0.5 40 AMBIENT TEMPERATURE Ta(℃) FORWARD CURRENT VS. AMBIENT TEMPERATURE 3KHz 300KHz 1KHz 100KHz F-REFRESH RATE 10 10KHz 9 8 7 6 5 1 5 4 2 3 0.1 -30 40 FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Ipeak MAX. IDC MAX. REL ATIVE LUMIN OU S IN TENSITY 1 5 B FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE 3 2 50 1 FORWARD CURRENT(mA) FORWARD CURRENT(mA) RELATIVE LUMINOUS INTENSITY 1 50 1 10 100 1000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) 10,000 1 1 10 100 1000 tp-PULSE DURATION uS (5) NOTE:25℃ free air temperature unless otherwise specified APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V. 3 Page 3 of 3 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] 10,000