AZ764F 20 AMP HIGH TEMPERATURE MINIATURE POWER RELAY FEATURES • • • • • • • • • Quick connect Faston and PCB terminals Ambient Temperature up to 105°C (221°F) Dielectric strength 5000 Vrms Low height: 15.7 mm 20 Amp switching (18 A over Faston) Sensitive coils Isolation spacing greater than 10 mm Proof tracking index (PTI/CTI) 250 Reinforced insulation, EN 60730-1 (VDE 0631, part 1) EN 60335-1 (VDE 0700, part 1) • UL, CUR file E43203 • VDE certificate 40012572 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 600 W or 5000 VA Max. switched current: 20 A Max. switched voltage: 300 VDC* or 400 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR VDE Life Expectancy Mechanical Electrical (ohmic load at 105°C / 221°F) Minimum operations 3 x 107 1.7 x 105 at 10 A 230 VAC res. 2.8 x 105 at 8 A 230 VAC res. 3.2 x 105 at 6 A 230 VAC res. Operate Time (typical) 7 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) 20 A at 250 VAC general use Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts 10 A at 250 VAC resistive, 105 °C, 150k cycles 16 A at 250 VAC resistive, 105 °C, 10k cycles 20 A at 250 VAC resistive, 85 °C, 10k cycles Insulation Resistance 105 megohms min. at 500 VDC, 20°C, 50% RH Insulation (according to DIN VDE 0110, IEC 60664-1) C250 Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC Dropout DC coils Greater than 10% of nominal coil voltage Material Silver tin oxide Resistance < 100 milliohms initially COIL Power At Pickup Voltage (typical) 140 mW Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 105°C (221°F) Max. Continuous Dissipation 2.2 W at 20°C (68°F) ambient Vibration 20 g at 30…500 Hz Temperature Rise (at nominal voltage) 16°C (29°F) Shock 30 g Enclosure P.B.T. polyester, UL-94 : V0 Terminals Tinned copper alloy P.C. and quick connect Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 16 grams Packing unit in pcs 12 per carton tube / 600 per carton box Max. Temperature 155°C (311°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4. Allow suitable slack on leads when wiring and do not subject the terminals to excessive force. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2010-07-01 AZ764F RELAY ORDERING DATA COIL SPECIFICATIONS - DC COIL SENSITIVE VERSION Nominal Coil VDC Must Operate VDC ORDER NUMBER* Max. Continuous VDC Coil Resistance Ohm ±10% 5 3.75 15.0 102 AZ764FH–1AE–5DS 6 4.5 18.0 144 AZ764FH–1AE–6DS 9 6.75 27.0 330 AZ764FH–1AE–9DS 10 7.5 30.0 400 AZ764FH–1AE–10DS 12 9.0 36.0 580 AZ764FH–1AE–12DS 24 18.0 72.0 2,300 AZ764FH–1AE–24DS * Substitue “FV” for “FH” for vertical quick connect terminals. Electrical life reduction factor at inductive AC load Electrical life at 250 VAC, resistive load 107 F 1,0 Reduction factor Number of cycles 0,9 106 0,8 0,7 0,6 0,5 105 0,4 0,3 1,0 0,9 0,8 0,7 0,6 0,5 0,4 0,3 cos j 0,2 Power factor 104 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 Ncos j = N x F Breaking capacity [kVA] Max. DC resistive load breaking capacity DC - Coil operating range 3,0 50 2,8 20 1 2,4 DC current [A] UB / U N 2,6 2,2 2,0 1,8 1,6 10 5 2 1,4 1 1,2 1,0 0,6 0,5 A 0,8 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient temperature [°C] A - Cold coil ( Tcoil = Tambient) sensitive coil 1 - Rated load on contacts 0,1 10 20 30 40 50 100 200 300 DC voltage [V] ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2010-07-01 AZ764F MECHANICAL DATA AZ764FH - HORIZONTAL VERSION PC BOARD LAYOUT 1.752 [44.5] A 6,3-0,8 DIN 46244 Max. 1.142 [29.0] 0.500 Max. [12.7] Max. .248 [6.3] .098 [2.5] .295 [7.5] .618 Max. [15.7] .551 [14.0] 1.28 [32.5] .197 [5.0] .098 [2.5] 6 x ø .050 [ø 1.3] .167 [4.25] .154 [3.9] Viewed toward terminals .295 [7.5] WIRING DIAGRAM 4 x .031 [0.8] 2 x ø .024 [ø 0.6] 2 4 5 .031 [0.8] .295 [7.5] .031 [0.8] 8 1.28 [32.5] .197 [5.0] 7 1 .098 [2.5] Viewed toward terminals MECHANICAL DATA AZ764FV - VERTICAL VERSION PC BOARD LAYOUT 1.594 [40.5] A 6,3-0,8 DIN 46244 Max. .248 [6.3] 0.500 Max. [12.7] 1.142 Max. [29.0] .098 [2.5] .295 [7.5] .618 Max. [15.7] .52 [13.2] 1.28 [32.5] .197 [5.0] .098 [2.5] 6 x ø .050 [ø 1.3] .167 [4.25] .154 [3.9] Viewed toward terminals .295 [7.5] WIRING DIAGRAM 4 x .031 [0.8] 2 x ø .024 [ø 0.6] 2 4 5 .031 [0.8] .295 [7.5] .031 [0.8] 8 .197 [5.0] 1.28 [32.5] 7 1 .098 [2.5] Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2010-07-01