FED30W SERIES 30 WATTS DC-DC CONVERTER FEATURES • 30 WATTS MAXIMUM OUTPUT POWER • OUTPUT CURRENT UP TO 8.5A • STANDARD 2.00 X 1.00 X 0.40 INCH • HIGH EFFICIENCY UP TO 91% • 4:1 ULTRA WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH OPTIONS NEGATIVE LOGIC REMOTE ON/OFF APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Semiconductor Equipment DESCRIPTION The FED30W series offer 30 watts of output power from a 2 x 1 x 0.4 inch package. FED30W series have 4:1 ultra wide input voltage of 9~36 and 18~75VDC. The FED30W have features 1600VDC of isolation, short circuit protection, over-current protection, over-voltage protection, over-temperature protection and six sided shielding. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Output power 30 Watts max. Voltage accuracy ±1% Voltage adjustability Single output ± 10% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Single ± 0.5% Load regulation No load to Full load ± 1% Dual Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% 1.5-5.1Vo 100mVp-p 20MHz bandwidth Ripple and noise (Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 1.5V Output 2.5V Output Over voltage protection 3.3V Output 5.0V & 5.1V & ±5V Zener diode clamp Output 12V & ±12V Output Output 15V & ±15V Over load protection % of FL at nominal input Short circuit protection 250µs 2.0V 3.3V 3.9V 6.2V 15V 18V 150% Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency Isolation voltage Case grounding See table Input to Output 1600VDC min. 1minute Input (Output) to Case 1600VDC min. 1minute Connect case to -input with decoupling Y Cap Isolation resistance 109ohms, min. 500VDC Isolation capacitance 1500pF, max. Switching frequency 430kHz± 10% Safety approvals IEC60950-1, UL60950-1, & EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94 V-0) 2.00 X 1.00 X 0.40 Inch (50.8X 25.4 X 10.2 mm) 30.5g(1.07oz) Dimensions Weight MTBF (Note 1) Page 1 of 3 MIL-HDBK-217F 1.288 x 106 hrs. Input voltage range 24VDC nominal input 48VDC nominal input 9 ~ 36VDC 18 ~ 75VDC Pi type 50VDC 100ms, max. 100VDC 100ms, max. 20mAp-p Power up 30ms Remote ON/OFF 30ms 9VDC, max. 18VDC, max. 8VDC 16VDC Input filter Input surge voltage 24VDC input 48VDC input Input reflected ripple current Nominal input and Start up time constant resistive load 24VDC input Start-up voltage 48VDC input 24VDC input Shutdown voltage 48VDC input Remote ON/OFF (Note 5) (Positive logic)(Standard) DC-DC ON Open or 3V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V (Negative logic)(Option) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3V < Vr < 12V Input current of Remote control pin Nominal Input -0.5mA ~ +0.5mA Remote off state input current Nominal Input 3mA ENVIRONMENTAL SPECIFICATIONS -40ºC to +50ºC (without derating) +50ºC to +85ºC (with derating) Maximum case temperature 105ºC Storage temperature range -55ºC to +125ºC Over temperature protection 115ºC Thermal impedance Nature convection 12ºC/Watt (Note 6) Nature convection with heat-sink 10ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH Operating ambient temperature EMC CHARACTERISTICS EMI (Note 7) EN55022 ESD EN61000-4-2 Radiated immunity Air Contact Class A ± 8kV Perf. Criteria A ± 6kV EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 8) EN61000-4-4 ± 2kV Perf. Criteria A Surge (Note 8) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A www.pduke.com 2014/4/30 FED30W SERIES 30 WATTS Model Number Input Range Output Voltage FED30-24S1P5W FED30-24S2P5W FED30-24S3P3W FED30-24S05W FED30-24S5P1W FED30-24S12W FED30-24S15W FED30-24D05W FED30-24D12W FED30-24D15W FED30-48S1P5W FED30-48S2P5W FED30-48S3P3W FED30-48S05W FED30-48S5P1W FED30-48S12W FED30-48S15W FED30-48D05W FED30-48D12W FED30-48D15W 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC DC-DC CONVERTER (2) Output (3) Max. Load Ripple & Noise Output Current Min. Load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 8500mA 8000mA 7500mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA 8500mA 8000mA 7500mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA (3) (4) No load Input Current Eff (%) Capacitor Load max. 70mA 70mA 70mA 105mA 105mA 20mA 30mA 90mA 25mA 25mA 30mA 45mA 45mA 65mA 65mA 60mA 50mA 50mA 15mA 15mA 80 83 86 88 88 89 89 88 87 87 80 84 86 88 88 90 91 88 88 88 20000µF 20000µF 20000µF 14400µF 14400µF 3000µF 2000µF ± 3000µF ± 2000µF ± 1300µF 20000µF 20000µF 20000µF 14400µF 14400µF 3000µF 2000µF ± 3000µF ± 2000µF ± 1300µF 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p Note 1. 2. 3. 4. 5. 6. 7. 8. MIL-HDBK-217F @Tc=70 ºC, Full load. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum input and constant resistive load. The CTRL pin voltage is referenced to -INPUT. Heat-sink is optional and P/N: 7G-0020C-F. The FED30W series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. An external filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5. The filter capacitor Power Mate suggest: 24 VDC INPUT : Nippon chemi-con KY series, 330µF/50V. 48 VDC INPUT : Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. FED30-48S05W Derating Curve with Heat-Sink 120 100 100 OUTPUT POWER (%) OUTPUT POWER (%) FED30-48S05W Derating Curve 120 80 60 40 20 0 80 60 40 20 0 55 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE( ℃) 100 -20 0 20 40 60 80 AMBIENT TEMPERATURE( ℃) 100 120 FED30-48S05W Efficiency VS Load FED30-48S05W Efficiency VSOutput Output Load FED30-48S05W Efficiency VS FED30-48S05W Efficiency VS InputInput Voltage voltage 95 64 -40 120 90 80 EFFICIENCY (%) EFFICIENCY (%) 85 93 91 89 87 75 70 65 60 55 85 18 Page 2 of 3 24 30 36 42 48 54 INPUT VOLTAGE (V) 60 66 72 50 75 10 www.pduke.com 20 30 40 50 60 % of FULL LOAD 70 80 90 100 2014/4/30 FED30W SERIES 30 WATTS DC-DC CONVERTER MECHANICAL DRAWING 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) EXTERNAL OUTPUT TRIMMING PIN CONNECTION Page 3 of 3 PIN SINGLE DUAL 1 + INPUT + INPUT 2 - INPUT - INPUT 3 CTRL CTRL 4 + OUTPUT + OUTPUT 5 - OUTPUT COMMON 6 TRIM - OUTPUT Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 6 6 RU 5 www.pduke.com RD 4 2014/4/30