SUPER FLUX LED BTF-37YECS-XX-X Package Dimension Product Features Ultra Bright Yellow Color High Light Output 3mm Super Flux Package Water Clear Lens Highly Reliable IC Compatible Leads with Stand Off Applications Outdoor Sign Board Automotive Front Panel Indicator Special Lighting General Purpose LEDs 0.01 inch Tolerance: ± Unit: ± 0.25 mm Optical and Electrical Characteristics at Ta=25℃ Parameter Symbol Minimum Typical Maximum Units Conditions Luminous Intensity Iv 485 600 － mcd IF = 20mA Viewing Angle 2θ1/2 － 90 － degree IF = 20mA λP 580 － 595 nm IF = 20mA VF － 1.9 2.5 V IF = 20mA IR 0 － 10 µA VR=5V Peak Wavelength DC Forward Voltage DC Reverse Current (Note 1) (Note 2) Notes: 1. Light intensity measures the light sensing response standard using chromatic meter. Refer to the CIE eye-response curve set by International Lighting committee. Tolerance of minimum and maximum intensity = ± 15% 2. Color coordinates range can be selected from the bin selection table. The parameters used fulfilled the 1932 2 standard 3. These products are sensitive to static electricity and care must be fully taken when handling products Page 1 of 2 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com SUPER FLUX LED BTF-37YECS-XX-X Absolute Maximum Ratings at Ta=25℃ Symbol Parameter Max. Unit PD Power Rating 60 mW VR Reverse Voltage (IR=10µA) 5 V IF Continuous Forward Current 30 mA IPF Peak Forward Current (0.1 duty cycle @ 1kHz) 100 mA Topr Operating Temperature Range –35 ~ + 80 ℃ Tstg Storage Temperature Range –40 ~ + 100 ℃ Lead Soldering Temperature [1.6mm (0.063inch) from body] 260℃ - max 5 seconds Color and Brightness Selection BTF-37YECS-XX-X Color Bin Selection Bin Y1 Y2 Y3 XX Yellow (nm) 580~585 585~590 590~595 580~595 Brightness Bin Selection Bin N O P Range(mcd) 485~680 680~950 950~1300 Page 2 of 2 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com