Part L Tol RDC IDC ( H) % IN MAX SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = CDRH105R-100 10 @ 100kHz (m ) N 25.8 CDRH105R-120 12 @ 100kHz N 32 3.4 CDRH105R-150 15 @ 100kHz N 40 2.8 CDRH105R-180 18 @ 100kHz N 46 2.6 CDRH105R-220 22 @ 100kHz N 58.5 2.4 CDRH105R-270 27 @ 100kHz N 65.4 2.2 CDRH105R-330 33 @ 100kHz N 81.4 1.9 CDRH105R-390 39 @ 100kHz N 103.1 1.7 PACKAGING MARKING CDRH105R-470 47 @ 100kHz N 122.1 1.6 NOTE CDRH105R-560 56 @ 100kHz N 144.8 1.4 CDRH105R-680 68 @ 100kHz N 193 1.4 CDRH105R-820 82 @ 100kHz N 219.4 1.2 CDRH105R-101 100 @ 100kHz N 247 1.1 CDRH105R-121 120 @ 100kHz N 298.4 1 CDRH105R-151 150 @ 100kHz N 355.1 0.9 CDRH105R-181 180 @ 100kHz N 393.4 0.8 CDRH105R-221 220 @ 100kHz N 483.8 0.8 CDRH105R-271 270 @ 100kHz N 632.5 0.7 CDRH105R-331 330 @ 100kHz N 780 0.6 CDRH105R-391 390 @ 100kHz N 957.5 0.6 CDRH105R-471 470 @ 100kHz N 1220 0.5 CDRH105R-561 560 @ 100kHz N 1352 0.5 CDRH105R-681 680 @ 100kHz N 1519 0.4 CDRH105R-821 820 @ 100kHz N 1694 0.4 CDRH105R-102 1000 @ 100kHz N 1946 0.4 TOLERANCES L=15%; M=20%; N=30% 10.30 10.40 1.7 7.3 1.7 3.6 3.5 CDRH105R SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 750PCS/REEL = 3 CHARACTERS, VALUE 5.0 (A) NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH105R SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH105R SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00