ETC2 ABAC26Q1135PNM09 Cylindrical 38999 series iii connectors with pc tail Datasheet

Cylindrical 38999 Series III
Connectors with PC tail
AB Connectors
Cylindrical 38999 III connectors with PC tail contacts
for solder mounting on printed circuit boards.
• Military & Aerospace
• Mil-DTL-38999
The Cylindrical 38999 Series III connectors with PC tail contacts for solder mounting to printed circuit boards,
meeting Mil-Spec requirements of MIL-DTL-38999.
38999 Series III PC Tail connectors are available in either single hole jam nut type 24, or four hole panel mount
type 20 styles. Insert arrangements incorporate PCB contact in sizes 16, 20 and 22D. Connector performances are
compatible with the Mil Spec. Considerations must be made for length of PCB tails and any mechanical methods
needed to stabilise the printed circuit board.
Pinout coordinate dimensions are available on request.
Specifications
Standard Materials & Finishes
Shell: Aluminium
Insulators: Rigid plastic/silicone rubber
Contacts: Copper alloy
Standard Plating Finishes
Aluminium Parts: Cadmium Olive drab (W)
Contacts: Gold over nickel plated
* Consult factory for alternative finishes.
Environmental Features
Temperature Rating: -65˚C to + 175˚C
Shock: 300g, 3 ms according EN 2591-D2 method A
Vibration (sine): 10 to 2000 Hz, 3x12 hrs (60g, 140-2000 Hz) with temperature cycling
Vibration (random):
50 to 2000 Hz , 2x8 hrs (1g² / Hz, 100-2000Hz) at Tº max.
25 to 2000 Hz , 2x8 hrs (5g² / Hz, 100-300Hz) (at ambient Tº)
Test with accessories in acc. with EN 2591-D3
Sealing: Mated connectors meet altitude immersion requirements of MIL-DTL-38999
Salt spray: 500 hrs
Resistance to fluids:
Gasoline: JP5 (OTAN F44)
Mineral hydraulic fluid: MIL-H-5606 (OTAN H515)
Synthetic hydraulic fluid: Skydrol 500 B4
Mineral lubricating: MIL-L-7870A (OTAN 0142)
Synthetic lubricating: MIL-L-23699 (OTAN 0156), MIL-L7808
Cleaning fluid: MIL-DTL-25769 diluted
De-icing fluid: MIL-A-8243
Extinguishing fluid: Chlorobrométhane
Cooling fluid: Coolanol
Mechanical Features
Coupling: 3 start stub acme thread
Contact Termination: PCB
Sealing: Dynamic sealing ring & individual wire seal grommet. IP67 rated.
Endurance: 500 mating / unmating operations
General Note
AB Connectors reserves the right to make changes in product specification without notice or liability.
All information is subject to AB Connectors’ own data and is considered accurate at time of going to print.
© AB Connectors Limited, Abercynon, Mountain Ash, Rhondda Cynon Taff CF45 4SF, UK.
Telephone: +44 (0) 1443 740331 • Facsimile: +44 (0) 01443 741676 • Email: [email protected] • Website: www.ttabconnectors.com
A subsidiary of
TT electronics plc
Issue 01
01.11
C
B
Date
Issue
ØA
SHELL SIZE
9
11
13
15
17
19
21
23
25
C MIN
12.21
12.21
12.32
12.32
12.21
12.01
13.01
13.01
13.03
C MAX
13.36
13.36
13.34
13.34
13.36
13.16
14.16
14.16
14.16
AB Connectors
ABAC.CDS.0003
PROJECTION
DESCRIPTION OF LAST CHANGE
CONTACT
22D
22D
22D
20
16
Receptacle connectors with preloaded straight PCB contacts
ATION
ONLY.
O.
C
C
B
JAM NUT STYLE
C MIN
12.21
12.21
12.32
12.32
12.21
12.01
13.01
13.01
13.03
SQUARE FLANGE STYLE
B
C MAX
13.36
13.36
13.34
13.34
13.36
13.16
14.16
14.16
14.16
CONTACTS
SHELL SIZE
9
11
13
B15
17
8.50
19
4.00
21
5.10
23
5.10
25
5.10
ØA
SHELL SIZE
9
11
13
15
17
19
21
23
25
ØA
Note:
CONTACT SIZE MOD CODE REF.
M03
22D
22D
M09
22D
M10
20
M09
16
M09
ØA
0.70
0.70
0.50
0.70
1.15
C MIN
10.49
10.49
10.49
10.49
10.49
10.49
10.49
10.49
10.51
C MAX
11.63
11.63
11.63
11.63
11.63
11.63
11.63
11.63
11.63
GEOMETRIC TOLERANCE SYMBOLS MATERIAL:
SYM CHARACTERISTIC
CHARACTERISTIC
SQUARE FLANGE
STYLE
B
Shell style:
20 :
24 :
26 :
STRAIGHTNESS
SYM
PROFILE OF A SURFACE
 = CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
TITLE: 38999
N/A
ANGULARITY
RUN OUT
SHELL SIZE
CFLATNESS
MIN
C MAX
AB AC
ROUNDNESS
POSITION
9
10.49
11.63
CYLINDRICITY
CONCENTRICITY
10.49
11.63
11
PROFILE OF A LINE
SYMMETRY
Square flange receptacle
M.M.C.
13
10.49
11.63
SQUARENESS
PARALLELISM
15
10.49
11.63
FOR EXPLANATION OF DIMENSIONS.
TOLERANCES. NOTES.
ETC. SEE BS308
17
10.49
11.63
Jam nut receptacle
A3
19
10.49
11.63
21
10.49
11.63
Plug with RFI shielding
23
10.49
11.63
25
10.51
11.63
ØA
Product Range:
20
W
11
TOLERANCES UNLESS OTHERWISE STATED
M
ALL DECIMAL PLACES
 0.1
HOLE DIAMETERS  0.05
ANGULAR  2
AB CONNECTORS
LTD.
P
N
M09
35
AG
DATE
THIS DRAWING MAY ONLY BE ALTERED IF
THE PART REMAINS INTERCHANGEABLE.
IF NOT , A NEW DRAWING NUMBER MUST
BE TAKEN.
25/11/2010
CHKD
NOTES
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
: Electroless
Nickel
MODIFICATIONS MUST BE CARRIED OUTFUSING
CAD SYSTEM
SYM
Plating:
N/A
 = CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
TITLE: 38999
Q : Zinc cobalt green passivate
AB CONNECTORS LTD.
ANGULARITY
RUN OUT
POSITION
CONCENTRICITY
NE
SYMMETRY
FACE
M.M.C.
TOLERANCES UNLESS OTHERWISE STATED
ALL DECIMAL PLACES
 0.1
HOLE DIAMETERS  0.05
M
SQUARENESS
ANGULAR  2
PLANATION OF DIMENSIONS.
CES. NOTES. ETC. SEE BS308
Do not scale this drawing
PC TAIL DATA SHEET
Variations start at 001
FINISH:
A TT GROUP COMPANY
QB
: Zinc
cobalt black passivate
DRAWN
AG
DATE
PRODUCT DRAWING NUMBER
THIS DRAWING MAY ONLY BE ALTERED IF
THE PART REMAINS INTERCHANGEABLE.
IF NOT , A NEW DRAWING NUMBER MUST
BE TAKEN.
25/11/2010
Shell size:
9, 11, 13, 15, 17, 19, 21, 23 or 25
Contact layout:
Please consult factory
Contact type:
P : Pin
CHKD
FINISH
CODE
VARN
ABAC.CDS.0003
S : Socket
N, A, B, C,
B D & E
Modification:
See Table 1 Below
ØA
Orientation:
Straight PCB contacts for 38999 Series III connector
B
Issued By
Date
Issue
PROJECTION
Socket
Contact ABAC.CDS.0003
B
ØA
DRAWING
FOR QUOTATION
PURPOSES ONLY.
NOT TO BE
WORKED TO.
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
DESCRIPTION OF LAST CHANGE
ØA
All Dimensions
in mm
Pin are
Contact
C
B
JAM NUT STYLE
Note:
C MIN
12.21
12.21
12.32
12.32
12.21
12.01
13.01
13.01
13.03
C MAX
13.36
13.36
13.34
13.34
13.36
13.16
14.16
14.16
14.16
B
Table 1
ØA
Size 22D pin contact with PCB tail
Size 22D socket contact with PCB tail
Size 20 pin contact with PCB tail
Size 20 socket contact with PCB tail
Size 16 pin contact with PCB tail
Size 16 socket contact with PCB tail
SHELL SIZE
9
514.2.18970.###
11
13
514.2.18977.###
15
514.2.18971.###
17
19
514.2.18978.###
21
514.2.18972.###
23
25
514.2.18979.###
ØA
Contact part numbers
CONTACTS
CONTACT SIZE MOD CODE REF.
M03
22D
22D
M09
22D
M10
20
M09
16
M09
ØA
0.70
0.70
0.50
0.70
1.15
B
8.50
4.00
5.10
5.10
5.10
To choose correct tail length and diameter, see Table 1
C
For additional information or to discuss your specific requirements please contact our Sales Team using the contact details below.
SQUARE FLANGE STYLE
B
SHELL SIZE
C MIN
C MAX
General Note
9
10.49
AB Connectors reserves the right to make changes in product specification without
notice
or liability. 11.63
10.49
11
A subsidiary of
All information is subject to AB Connectors’ own data and is considered accurate
at time
of going to11.63
print.
13
10.49
11.63
TT electronics plc
15
10.49
11.63
© AB Connectors Limited, Abercynon, Mountain Ash, Rhondda Cynon Taff
UK.
17CF45 4SF,10.49
11.63
Telephone: +44 (0) 1443 740331 • Facsimile: +44 (0) 01443 741676 • Email:
Issue 01
01.11
[email protected]
10.49
11.63• Website: www.ttabconnectors.com
NOTES
21
10.49
11.63
23
10.49
11.63
1. DIMENSIONS IN MILLIMETRES.
25
10.51
11.63
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
ØA
P
A TT GROUP COMPANY
DRAWN
W : Olive drab cadmium
CHARACTERISTIC
1. DIMENS
2. CONSUL
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
C
AB Part Number Explanation
SYM
NOTES
For dimensions A & B, see Table 1. All dimensions are in millimetres
C TOLERANCE SYMBOLS MATERIAL:
TIC
Issued By
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
mensions are in mm
S
JAM NUT STYLE
Cylindrical 38999 Series III
Connectors with PC tail
PRODUCT DRAW
ABAC.CDS
Similar pages