Delta DVMD28F/ES-XXX High reliability hybrid emi filter Datasheet

DVMD28 Series
HIGH RELIABILITY HYBRID
EMI FILTERS
DESCRIPTION
FEATURES
The DVMD series of hybrid EMI filters is operable
over the full military (-55 °C to +125 °C) temperature
range with no power derating. The DVMD EMI filter
is designed to filter conducted emissions of two
DVTR or one DVFL series DC-DC converters.
•
•
These filters are designed and manufactured in a
facility qualified to ISO9001 and certified to MIL-PRF38534 and MIL-STD-883.
This product may incorporate one or more of the
following U.S. patents:
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
•
•
•
•
•
•
•
•
•
•
High Reliability
Wide Input Voltage Range: 0 to 50 Volts per
MIL-STD-704
Up to 7.0 Amp Maximum Current
40 dB Minimum Attenuation at 500 kHz
Industry Standard Pinout
High Input Transient Voltage: 80 Volts for 1 sec
per MIL-STD-704A
Precision Seam Welded Hermetic Package
Custom Versions Available
Additional Environmental Screening Available
Meets MIL-STD-461C and MIL-STD-461D EMC
Requirements
Protects Against Conducted Susceptibility
Specified in MIL-STD-461C, CS01 and CS02
MIL-PRF-38534 Element Evaluated
Components
Figure 1 – DVMD28F EMI Filter
(Not To Scale)
1X024DSE
11314 4th Avenue
West, Suite 206
Everett, WA 98204
http://www.vpt-inc.com
Sales Information:
Phone: (425) 353-3010
Fax: (425) 353-4030
E-mail: [email protected]
1
DVMD28 Series
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Current
Power Dissipation (Full Load, TCASE = +125°C)
Parameter
50 VDC
80 Volts
7 Amps
6 Watts
Storage Temperature
Lead Solder Temperature (10 seconds)
Weight (Maximum)
-65°C to +150°C
300°C
63 Grams
DVMD28
Conditions
Units
Min
Typ
Max
Continuous
0
28
50
V
Transient, 1 sec
-
-
80
V
Continuous
0
-
7
A
STATIC
INPUT
2
Voltage
Current
1,2,3
OUTPUT
2
Voltage
Current
Continuous
2,3
VOUT = VIN – (IIN x RDC)
V
Continuous
0
-
7
A
Continuous
-
-
120
mΩ
Continuous
-
-
6
W
NOISE REJECTION
f = 500 kHz
40
-
-
dB
CAPACITANCE
Pin to Case
25
-
55
nF
ISOLATION
Any Pin to Case, 500 VDC
100
-
-
MΩ
MTBF (MIL-HDBK-217F)
AIF @ TC = 55°C
-
1.225
-
MHrs
DC RESISTANCE
POWER DISSIPATION
Notes:
2
1. Derate linearly to 0 at 135°C.
2. Verified by qualification testing.
3. Rated current applies at any voltage.
BLOCK DIAGRAM
PIN 1
PIN 2
28V IN
28V OUT
PIN 4
CASE
IN COM
OUT COM
PIN 5
PIN 3
Figure 2
1X024DSE
2
DVMD28 Series
CONNECTION DIAGRAMS
DVFL2800S DC-DC CONVERTER
1
7
28V IN
+V OUT
DVMD28 EMI FILTER
1
2
28V IN
6
28V OUT
10
SYNC IN
+S
LOAD
28 Vdc
4
+
-
9
INH1
5
3
2
IN COM OUT COM
4
-S
8
IN COM
CASE
OUT COM
3
Figure 3 – DVMD28 EMI Filter Hookup with Single Converter
1X024DSE
3
DVMD28 Series
CONNECTION DIAGRAMS
DVTR2800S DC-DC CONVERTER
1
9
5
28V IN
+V OUT
SYNC
+S
6
LOAD
2
3
INH
-S
10
4
IN COM OUT COM
7, 8
CASE
DVTR2800S DC-DC CONVERTER
1
5
28V IN
+V OUT
SYNC
+S
DVMD28 EMI FILTER
1
2
28V IN
9
28V OUT
6
LOAD
28 Vdc
2
+
-
3
INH
5
3
10
IN COM OUT COM
4
-S
4
IN COM OUT COM
CASE
7, 8
Figure 4 – DVMD28 EMI Filter Hookup with Two Converters
1X024DSE
4
DVMD28 Series
EMI MEASUREMENT METHODS CONNECTION DIAGRAMS
Figure 5 – MIL-STD-461C Measurement Method (Feedthrough Capacitor)
Figure 6 – MIL-STD-461D Measurement Method (LISN)
1X024DSE
5
DVMD28 Series
EMI PERFORMANCE CURVES
(TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
Figure 7 – MIL-STD-461C
(2) DVTR2800S Without EMI Filter
Figure 8 – MIL-STD-461C
(2) DVTR2800S With DVMD28 EMI Filter
Figure 9 – MIL-STD-461D
(2) DVTR2800S With DVMD28 EMI Filter
1X024DSE
6
DVMD28 Series
PACKAGE SPECIFICATIONS
TOP VIEW
SIDE VIEW
PIN
FUNCTION
1
28V IN
2
28V OUT
3
OUT COM
4
CASE
5
IN COM
BOTTOM VIEW
Figure 10 – Package and Pinout
(Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X024DSE
7
DVMD28 Series
PACKAGE PIN DESCRIPTION
Pin
Function
Description
1
28V IN
Positive Input Voltage Connection
2
28V OUT
Positive Output Voltage Connection
3
OUT COM
Output Common Connection
4
CASE
Case Connection
5
IN COM
Input Common Connection
1X024DSE
8
DVMD28 Series
ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534)
Screening
MIL-STD-883
(No Suffix)
Extended
/ES
HB
/HB
Class H
/H
Class K
/K
N/A
N/A
N/A
N/A
N/A
•
•
•
•
•
•
•
•
•
•
Standard
NonDestructive
Bond Pull
N/A – Products do not contain
Wirebonds
Internal
Visual
Method 2017, 2032
Internal Procedure
Temperature
Cycling
Method 1010, Condition C
Method 1010, -55°C to 125°C
•
Constant
Acceleration
Method 2001, 3000g, Y1 Direction
Method 2001, 500g, Y1 Direction
•
PIND
Method 2020, Condition A2
•
Pre Burn-In
Electrical
100% at 25°C
•
Burn-In
Method 1015, 320 hours at +125°C
Method 1015, 160 hours at +125°C
96 hours at +125°C
24 hours at +125°C
•
Final
Electrical
MIL-PRF-38534, Group A1
100% at 25°C
•
Hermeticity
Method 1014, Fine Leak, Condition A
Method 1014, Gross Leak, Condition C
-3
Dip (1 x 10 )
Radiography
Method 20123
External
Visual
Method 2009
Notes:
1X024DSE
1.
2.
3.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment.
PIND test Certificate of Compliance included in product shipment.
Radiographic test Certificate of Compliance and film(s) included in product shipment.
9
DVMD28 Series
ORDERING INFORMATION
DVMD
28
F
/HB
1
2
3
4
-
XXX
5
(1)
(2)
(3)
(4)
(5)
Product Series
Nominal Input
Voltage
Package Option
Screening
Code1,2
Additional
Screening
Code
DVMD
Notes:
28
1.
2.
28 Volts
F
Flanged
None
/ES
/HB
/H
/K
Standard
Extended
HB
Class H
Class K
Contact Sales
Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products.
VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our
sole discretion unless specifically forbidden by customer contract.
Please contact your sales representative or the VPT Inc. Sales Department for more information
concerning additional environmental screening and testing, different input voltage, output voltage,
power requirement, source inspection, and/or special element evaluation for space or other higher
quality applications.
1X024DSE
10
DVMD28 Series
SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS
Standard Microcircuit
Drawing (SMD)
DVMD28 Series
Similar Part Number
*T.B.D.
DVMD28F/H
Do not use the DVMD28 Series similar part number for SMD product acquisition. It is listed for
reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD’s can be
downloaded from the DSCC website at http://www.dscc.dla.mil/programs/smcr/. The SMD number
listed above is for MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA
(Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead
finishes, and radiation levels.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales
Department at:
Phone:
Fax:
E-mail:
(425) 353-3010
(425) 353-4030
[email protected]
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.
1X024DSE
11
Similar pages