ALSC ASM5P2309AF-1-16-SR 3.3v zero delay buffer Datasheet

ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
3.3V Zero Delay Buffer
General Features
133MHz frequencies, and has higher drive than the -1
15MHz to 133MHz operating range, compatible
devices. All parts have on-chip PLLs that lock to an input
with CPU and PCI bus frequencies.
clock on the REF pin. The PLL feedback is on-chip and is
ƒ
Zero input - output propagation delay.
obtained from the CLKOUT pad.
ƒ
Multiple low-skew outputs.
ƒ
ƒ
Output-output skew less than 250pS.
The ASM5P2309A has two banks of four outputs each,
ƒ
Device-device skew less than 700pS.
which can be controlled by the Select inputs as shown in
ƒ
One input drives 9 outputs, grouped as
the Select Input Decoding Table. The select input also
4 + 4 + 1(ASM5P2309A).
allows the input clock to be directly applied to the outputs
One input drives 5 outputs (ASM5P2305A).
for chip and system testing purposes.
ƒ
ƒ
ƒ
ƒ
Less than 200 pS cycle-to-cycle jitter is compatible
with Pentium® based systems.
Multiple ASM5P2309A and ASM5P2305A devices can
Test Mode to bypass PLL (ASM5P2309A only,
accept the same input clock and distribute it. In this case
Refer Select Input Decoding Table).
the skew between the outputs of the two devices is
Available in 16pin 150-mil SOIC, 4.4 mm TSSOP
guaranteed to be less than 700pS.
(ASM5P2309A), and in 8pin 150-mil SOIC
ƒ
package (ASM5P2305A).
All outputs have less than 200pS of cycle-to-cycle jitter.
3.3V operation, advanced 0.35µ CMOS
The input and output propagation delay is guaranteed to be
technology.
less than 350pS, and the output to output skew is
guaranteed to be less than 250pS.
Functional Description
ASM5P2309A is a versatile, 3.3V zero-delay buffer
designed to distribute high-speed clocks. It accepts one
reference input and drives out nine low-skew clocks. It is
available in a 16-pin package. The ASM5P2305A is the
eight-pin version of the ASM5P2309A. It accepts one
reference input and drives out five low-skew clocks.
The -1H version of the ASM5P23XXA operates at up to
The ASM5P2309A and the ASM5P2305A are available in
two different configurations, as shown in the ordering
information table. The ASM5P2305A-1/ ASM5P2309A-1 is
the base part. The ASM5P2305A-1H/ ASM5P2309A-1H is
the high drive version of the -1 and its rise and fall times
are much faster than -1 part.
Block Diagram
PLL
REF
PLL
CLKOUT
MUX
CLKOUT
CLKA1
REF
CLKA2
CLK1
CLKA3
CLK2
CLK3
ASM5P2305A
CLK4
CLKA4
S2
S1
Select Input
Decoding
CLKB1
CLKB2
CLKB3
ASM5P2309A
Alliance Semiconductor
2575 Augustine Drive • Santa Clara, CA • Tel: 408.855.4900 • Fax: 408.855.4999 • www.alsc.com
Notice: The information in this document is subject to change without notice.
CLKB4
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Select Input Decoding for ASM5P2309A
S2
S1
Clock A1 - A4
Clock B1 - B4
CLKOUT1
Output Source
PLL
Shut-Down
0
0
Three-state
Three-state
Driven
PLL
N
0
1
Driven
Three-state
Driven
PLL
N
1
0
Driven
Driven
Driven
Reference
Y
1
1
Driven
Driven
Driven
PLL
N
Notes:
1. This output is driven and has an internal feedback for the PLL. The load on this output can be adjusted to change the skew between the reference and the
output.
Zero Delay and Skew Control
For applications requiring zero input-output delay, all
All outputs should be uniformly loaded to achieve Zero
Delay between input and output. Since the CLKOUT pin is
the internal feedback to the PLL, its relative loading can
adjust the input-output delay.
outputs, including CLKOUT, must be equally loaded. Even
if CLKOUT is not used, it must have a capacitive load equal
to that on other outputs, for obtaining zero-input-output
delay.
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
2 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Pin Configuration
16 CLKOUT
REF 1
CLKA1
2
15 CLKA4
CLKA2
3
14 CLKA3
13 VDD
VDD
4
GND
5
ASM5P2309A
12 GND
CLKB1 6
11 CLKB4
CLKB2 7
10 CLKB3
S2
9
8
REF
1
CLK2
2
S1
8
CLKOUT
7
CLK4
ASM5P2305A
CLK1
3
6
VDD
GND
4
5
CLK3
Pin Description for ASM5P2309A
Pin #
1
2
3
Pin Name
REF
2
Description
Input reference frequency, 5V tolerant input
3
Buffered clock output, bank A
3
Buffered clock output, bank A
CLKA1
CLKA2
4
VDD
3.3V supply
5
GND
Ground
6
CLKB13
Buffered clock output, bank B
7
3
Buffered clock output, bank B
8
9
10
CLKB2
4
S2
Select input, bit 2
4
S1
Select input, bit 1
3
Buffered clock output, bank B
3
Buffered clock output, bank B
CLKB3
11
CLKB4
12
GND
13
VDD
14
15
16
Ground
3.3V supply
3
CLKA3
Buffered clock output, bank A
3
CLKA4
CLKOUT
Buffered clock output, bank A
3
Buffered output, internal feedback on this pin
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
3 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Pin Description for ASM5P2305A
Pin #
1
2
3
Pin Name
REF
2
Input reference frequency, 5V-tolerant input
3
Buffered clock output
3
Buffered clock output
CLK2
CLK1
4
GND
5
CLK3 3
6
VDD
7
8
Description
Ground
Buffered clock output
3.3V supply
3
CLK4
CLKOUT
Buffered clock output
3
Buffered clock output, internal feedback on this pin
Notes:
2. Weak pull-down.
3. Weak pull-down on all outputs.
4. Weak pull-up on these inputs.
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
4 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Absolute Maximum Ratings
Parameter
Min
Max
Unit
Supply Voltage to Ground Potential
-0.5
+7.0
V
DC Input Voltage (Except REF)
-0.5
VDD + 0.5
V
DC Input Voltage (REF)
-0.5
7
V
Storage Temperature
-65
+150
°C
Max. Soldering Temperature (10 sec)
260
°C
Junction Temperature
150
°C
Static Discharge Voltage
2000
V
(As per JEDEC STD22- A114-B)
Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can
affect device reliability.
Operating Conditions for ASM5P2305A and ASM5P2309A - Commercial Temperature Devices
Parameter
Description
Min
Max
Unit
3.0
3.6
V
0
70
°C
VDD
Supply Voltage
TA
Operating Temperature (Ambient Temperature)
CL
Load Capacitance, below 100MHz
30
pF
CL
Load Capacitance, from 100MHz to 133MHz
10
pF
CIN
Input Capacitance
7
pF
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
5 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Electrical Characteristics for ASM5P2305A and ASM5P2309A - Commercial Temperature Devices
Parameter
VIL
Description
Input LOW Voltage
Test Conditions
Min
Typ
5
5
Max
Unit
0.8
V
VIH
Input HIGH Voltage
IIL
Input LOW Current
VIN = 0V
50
µA
IIH
Input HIGH Current
VIN = VDD
100
µA
0.4
V
VOL
VOH
IDD
Zo
2.0
Output LOW Voltage 6
Output HIGH Voltage 6
V
IOL = 8mA (-1)
IOH = 12mA (-1H)
IOL = -8mA (-1)
IOH = -12mA (-1H)
2.4
V
Unloaded outputs at 66.67MHz,
Supply Current
34
SEL inputs at VDD
Output Impedance
mA
Ω
23
Switching Characteristics for ASM5P2305A-1 and ASM5P2309A-1 -- Commercial Temperature Devices7
Parameter
1/t1
Description
Test Conditions
Output Frequency
t3
t4
t5
t6
Output Rise Time
Output Fall Time
6
Output-to-output skew
6
Delay, REF Rising Edge to
CLKOUT Rising Edge
6
t7
Device-to-Device Skew 6
tJ
Cycle-to-cycle jitter 6
tLOCK
Max
15
100
10pF load
15
133
40
MHz
%
Measured between 0.8V and 2.0V
2.50
nS
Measured between 2.0V and 0.8V
2.50
nS
All outputs equally loaded
250
pS
0
±350
pS
0
700
pS
200
pS
1.0
mS
Measured at VDD /2
Measured at VDD/2 on the CLKOUT pins
of the device
Measured at 66.67MHz, loaded outputs
presented on REF pin
50
Unit
60
Stable power supply, valid clock
PLL Lock Time 6
Typ
30pF load
Duty Cycle6 = (t2 / t1) * 100 Measured at 1.4V, FOUT = 66.67MHz
6
Min
Notes:
5. REF input has a threshold voltage of VDD /2
6. Parameter is guaranteed by design and characterization. Not 100% tested in production
7. All parameters specified with loaded outputs.
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
6 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Switching Characteristics for ASM5P2305A-1H and ASM5P2309A-1H Commercial Temperature Devices9
Parameter
Description
1/t1
Test Conditions
t6
10pF load
15
133
Measured at 1.4 V, FOUT = 66.67MHz
40
50
60
Duty Cycle = (t2 / t1) * 100
Measured at 1.4 V, FOUT < 50.0MHz
45
50
55
Output Rise Time 8
Measured between 0.8V and 2.0V
1.5
nS
Measured between 2.0V and 0.8V
1.5
nS
All outputs equally loaded
250
pS
0
± 350
pS
0
700
pS
Output Fall Time
8
Output-to-output skew
8
Delay, REF Rising Edge to
CLKOUT Rising Edge
8
t7
Device-to-Device Skew 8
t8
Output Slew Rate 8
tJ
Cycle-to-cycle jitter 8
tLOCK
Unit
100
8
t5
Max
15
Duty Cycle 8 = (t2 / t1) * 100
t4
Typ
30pF load
Output Frequency
t3
Min
Measured at VDD /2
Measured at VDD/2 on the CLKOUT pins
of the device
Measured between 0.8V and 2.0V using
Test Circuit #2
%
1
V/nS
Measured at 66.67 MHz, loaded outputs
Stable power supply, valid clock
PLL Lock Time 8
MHz
presented on REF pin
200
pS
1.0
mS
Notes:
8. Parameter is guaranteed by design and characterization. Not 100% tested in production
9. All parameters specified with loaded outputs.
Operating Conditions for ASM5I2305A and ASM5I2309A Industrial Temperature Devices
Parameter
Description
Min
Max
Unit
VDD
Supply Voltage
3.0
3.6
V
TA
Operating Temperature (Ambient Temperature)
-40
85
°C
CL
Load Capacitance, below 100MHz
30
pF
CL
Load Capacitance, from 100MHz to 133MHz
15
pF
CIN
Input Capacitance
7
pF
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
7 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Electrical Characteristics for ASM5I2305A and ASM5I2309A Industrial Temperature Devices
Parameter
Description
Test Conditions
Min
Typ
Max
Unit
0.8
V
VIL
Input LOW Voltage10
VIH
Input HIGH Voltage10
IIL
Input LOW Current
VIN = 0V
50
µA
IIH
Input HIGH Current
VIN = VDD
100
µA
0.4
V
VOL
Output LOW Voltage11
VOH
Output HIGH Voltage11
2.0
V
IOL = 8mA (-1)
IOH = 12mA (-1H)
IOL = -8mA (-1)
IOH = -12mA (-1H)
2.4
V
Unloaded outputs at 100MHz,
SEL inputs at VDD or GND,
50
at room temp.
Unloaded outputs at 66.67MHz,
IDD
Supply Current
SEL inputs at VDD or GND,
34
mA
at room temp.
Unloaded outputs at 33MHz,
SEL inputs at VDD or GND,
19
at room temp.
Zo
Output Impedance
23
Ω
Notes:
10. REF input has a threshold voltage of VDD /2
11. Parameter is guaranteed by design and characterization. Not 100% tested in production
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
8 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Switching Characteristics for ASM5I2305A-1H and ASM5I2309A-1H - Industrial Temperature Devices13
Parameter
1/t1
Description
Test Conditions
Output Frequency
Duty Cycle = (t2 / t1) * 100
t3
t4
t5
t6
12
Output Rise Time
12
Output Fall Time
12
Output-to-output skew
Delay, REF Rising Edge to
12
CLKOUT Rising Edge
t7
Device-to-Device Skew12
t8
Output Slew Rate12
tJ
Cycle-to-cycle jitter12
tLOCK
Max
15
100
10pF load
15
133
Measured at 1.4V, FOUT < 50.0MHz
40
50
60
45
50
55
Unit
MHz
%
Measured between 0.8V and 2.0V
1.5
nS
Measured between 2.0V and 0.8V
1.5
nS
All outputs equally loaded
250
pS
0
± 350
pS
0
700
pS
Measured at VDD /2
Measured at VDD/2 on the CLKOUT pins
of the device
Measured between 0.8V and 2.0V using Test
Circuit #2
Measured at 66.67MHz, loaded outputs
Stable power supply, valid clock presented on
PLL Lock Time12
Typ
30pF load
Duty Cycle12 = (t2 / t1) * 100 Measured at 1.4V, FOUT = 66.67MHz
12
Min
REF pin
1
V/nS
200
pS
1.0
mS
Notes:
12. Parameter is guaranteed by design and characterization. Not 100% tested in production
13. All parameters specified with loaded outputs.
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
9 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Switching Waveforms
Duty Cycle Timing
t1
t
2
1.4 V
1.4 V
1.4 V
All Outputs Rise/Fall Time
OUTPUT
2.0 V
0.8 V
2.0 V
0.8 V
3.3 V
0V
t4
t3
Output - Output Skew
1.4 V
OUTPUT
1.4 V
OUTPUT
t5
Input - Output Propagation Delay
VDD /2
INPUT
VDD /2
OUTPUT
t6
Device - Device Skew
CLKOUT, Device 1
V DD /2
V DD /2
CLKOUT, Device 2
t
7
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
10 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Test Circuits
TEST CIRCUIT # 2
TEST CIRCUIT # 1
VDD
VDD
0.1uF
CLKOUT
CLOAD
VDD
0.1uF
0.1uF
OUTPUTS
GND
GND
1KΩ
OUTPUTS
1KΩ
VDD
0.1uF
GND
GND
For parameter t8 (output skew rate) on -1H devices
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
11 of 20
10pF
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Package Information
8-lead (150-mil) SOIC Package
H
E
D
A2
A
C
A1
D
θ
e
L
B
Dimensions
Symbol
Inches
Min
Max
Millimeters
Min
Max
A1
0.004
0.010
0.10
0.25
A
0.053
0.069
1.35
1.75
A2
0.049
0.059
1.25
1.50
B
0.012
0.020
0.31
0.51
C
0.007
0.010
0.18
0.25
D
0.193 BSC
4.90 BSC
E
0.154 BSC
3.91 BSC
e
0.050 BSC
1.27 BSC
H
0.236 BSC
6.00 BSC
L
0.016
0.050
0.41
1.27
θ
0°
8°
0°
8°
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
12 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
8-lead Thin Shrunk Small Outline Package (4.40-MM Body)
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Min
Millimeters
Max
A
Min
Max
0.043
1.10
A1
0.002
0.006
0.05
0.15
A2
0.033
0.037
0.85
0.95
B
0.008
0.012
0.19
0.30
c
0.004
0.008
0.09
0.20
D
0.114
0.122
2.90
3.10
E
0.169
0.177
4.30
4.50
e
0.026 BSC
0.65 BSC
H
0.252 BSC
6.40 BSC
L
0.020
0.028
0.50
0.70
θ
0°
8°
0°
8°
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
13 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
16-lead (150 Mil) Molded SOIC
PIN 1 ID
1
8
H
E
9
16
D
h
Seating Plane
A2
D
A
e
C
θ
0.004
L
A1
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
0.053
0.069
1.35
1.75
A1
0.004
0.010
0.10
0.25
A2
0.049
0.059
1.25
1.50
B
0.013
0.022
0.33
0.53
C
0.008
0.012
0.19
0.27
D
0.386
0.394
9.80
10.01
E
0.150
0.157
3.80
4.00
e
0.050 BSC
1.27 BSC
H
0.228
0.244
5.80
6.20
h
0.010
0.016
0.25
0.41
L
0.016
0.035
0.40
0.89
θ
0°
8°
0°
8°
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
14 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
16-lead Thin Shrunk Small Outline Package (4.40-MM Body)
1
8
PIN 1 ID
E
16
A
A2
e
B
A1
Seating Plane
C
θ
D
9
H
L
D
Dimensions
Symbol
Inches
Min
Millimeters
Max
A
Min
Max
0.043
1.20
A1
0.002
0.006
0.05
0.15
A2
0.031
0.041
0.80
1.05
B
0.007
0.012
0.19
0.30
C
0.004
0.008
0.09
0.20
D
0.193
0.201
4.90
5.10
E
0.169
0.177
4.30
4.50
e
0.026 BSC
0.65 BSC
H
0.252 BSC
6.40 BSC
L
0.020
0.030
0.50
0.75
θ
0°
8°
0°
8°
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
15 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Ordering Codes
Ordering Code
Marking
Package Type
Operating Range
ASM5P2309A-1-16-ST
5P2309A-1
16-pin 150-mil SOIC-TUBE
Commercial
ASM5I2309A-1-16-ST
5I2309A-1
16-pin 150-mil SOIC- TUBE
Industrial
ASM5P2309A-1-16-SR
5P2309A-1
16-pin 150-mil SOIC-TAPE & REEL
Commercial
ASM5I2309A-1-16-SR
5I2309A-1
16-pin 150-mil SOIC-TAPE & REEL
Industrial
ASM5P2309A-1-16-TT
5P2309A-1
16-pin 4.4-mm TSSOP - TUBE
Commercial
ASM5I2309A-1-16-TT
5I2309A-1
16-pin 4.4-mm TSSOP - TUBE
Industrial
ASM5P2309A-1-16-TR
5P2309A-1
16-pin 4.4-mm TSSOP - TAPE & REEL Commercial
ASM5I2309A-1-16-TR
5I2309A-1
16- pin 4.4-mm TSSOP - TAPE & REEL Industrial
ASM5P2309A-1H-16-ST
5P2309A-1H
16-pin 150-mil SOIC-TUBE
Commercial
ASM5I2309A-1H-16-ST
5I2309A-1H
16-pin 150-mil SOIC- TUBE
Industrial
ASM5P2309A-1H-16-SR
5P2309A-1H
16-pin 150-mil SOIC-TAPE & REEL
Commercial
ASM5I2309A-1H-16-SR
5I2309A-1H
16-pin 150-mil SOIC-TAPE & REEL
Industrial
ASM5P2309A-1H-16-TT
5P2309A-1H
16-pin 4.4-mm TSSOP - TUBE
Commercial
ASM5I2309A-1H-16-TT
5I2309A-1H
16-pin 4.4-mm TSSOP - TUBE
Industrial
ASM5P2309A-1H-16-TR
5P2309A-1H
16-pin 4.4-mm TSSOP - TAPE & REEL Commercial
ASM5I2309A-1H-16-TR
5I2309A-1H
16-pin 4.4-mm TSSOP - TAPE & REEL Industrial
ASM5P2305A-1-08-ST
5P2305A-1
8-pin 150-mil SOIC-TUBE
Commercial
ASM5I2305A-1-08-ST
5I2305A-1
8-pin 150-mil SOIC- TUBE
Industrial
ASM5P2305A-1-08-SR
5P2305A-1
8-pin 150-mil SOIC-TAPE & REEL
Commercial
ASM5I2305A-1-08-SR
5I2305A-1
8-pin 150-mil SOIC-TAPE & REEL
Industrial
ASM5P2305A-1-08-TT
5P2305A-1
8-pin 4.4-mm TSSOP - TUBE
Commercial
ASM5I2305A-1-08-TT
5I2305A-1
8-pin 4.4-mm TSSOP - TUBE
Industrial
ASM5P2305A-1-08-TR
5P2305A-1
8-pin 4.4-mm TSSOP - TAPE & REEL
Commercial
ASM5I2305A-1-08-TR
5I2305A-1
8-pin 4.4-mm TSSOP - TAPE & REEL
Industrial
ASM5P2305A-1H-08-ST
5P2305A-1H
8-pin 150-mil SOIC-TUBE
Commercial
ASM5I2305A-1H-08-ST
5I2305A-1H
8-pin 150-mil SOIC- TUBE
Industrial
ASM5P2305A-1H-08-SR
5P2305A-1H
8-pin 150-mil SOIC-TAPE & REEL
Commercial
ASM5I2305A-1H-08-SR
5I2305A-1H
8-pin 150-mil SOIC-TAPE & REEL
Industrial
ASM5P2305A-1H-08-TT
5P2305A-1H
8-pin 4.4-mm TSSOP - TUBE
Commercial
ASM5I2305A-1H-08-TT
5I2305A-1H
8-pin 4.4-mm TSSOP - TUBE
Industrial
ASM5P2305A-1H-08-TR
5P2305A-1H
8-pin 4.4-mm TSSOP - TAPE & REEL
Commercial
ASM5I2305A-1H-08-TR
5I2305A-1H
8-pin 4.4-mm TSSOP - TAPE & REEL
Industrial
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
16 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Ordering Codes (cont’d)
Ordering Code
Marking
Package Type
Operating Range
ASM5P2309AF-1-16-ST
5P2309AF-1
16-pin 150-mil SOIC-TUBE,Pb Free
Commercial
ASM5I2309AF-1-16-ST
5I2309AF-1
16-pin 150-mil SOIC- TUBE,Pb Free
Industrial
ASM5P2309AF-1-16-SR
5P2309AF-1
16-pin 150-mil SOIC-TAPE & REEL,Pb Free
Commercial
ASM5I2309AF-1-16-SR
5I2309AF-1
16-pin 150-mil SOIC-TAPE & REEL,Pb Free
Industrial
ASM5P2309AF-1-16-TT
5P2309AF-1
16-pin 4.4-mm TSSOP - TUBE,Pb Free
Commercial
ASM5I2309AF-1-16-TT
5I2309AF-1
16-pin 4.4-mm TSSOP - TUBE,Pb Free
Industrial
ASM5P2309AF-1-16-TR
5P2309AF-1
16-pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Commercial
ASM5I2309AF-1-16-TR
5I2309AF-1
16- pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Industrial
ASM5P2309AF-1H-16-ST
5P2309AF-1H
16-pin 150-mil SOIC-TUBE,Pb Free
Commercial
ASM5I2309AF-1H-16-ST
5I2309AF-1H
16-pin 150-mil SOIC- TUBE,Pb Free
Industrial
ASM5P2309AF-1H-16-SR
5P2309AF-1H
16-pin 150-mil SOIC-TAPE & REEL,Pb Free
Commercial
ASM5I2309AF-1H-16-SR
5I2309AF-1H
16-pin 150-mil SOIC-TAPE & REEL,Pb Free
Industrial
ASM5P2309AF-1H-16-TT
5P2309AF-1H
16-pin 4.4-mm TSSOP - TUBE,Pb Free
Commercial
ASM5I2309AF-1H-16-TT
5I2309AF-1H
16-pin 4.4-mm TSSOP - TUBE,Pb Free
Industrial
ASM5P2309AF-1H-16-TR
5P2309AF-1H
16-pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Commercial
ASM5I2309AF-1H-16-TR
5I2309AF-1H
16-pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Industrial
ASM5P2305AF-1-08-ST
5P2305AF-1
8-pin 150-mil SOIC-TUBE,Pb Free
Commercial
ASM5I2305AF-1-08-ST
5I2305AF-1
8-pin 150-mil SOIC- TUBE,Pb Free
Industrial
ASM5P2305AF-1-08-SR
5P2305AF-1
8-pin 150-mil SOIC-TAPE & REEL,Pb Free
Commercial
ASM5I2305AF-1-08-SR
5I2305AF-1
8-pin 150-mil SOIC-TAPE & REEL,Pb Free
Industrial
ASM5P2305AF-1-08-TT
5P2305AF-1
8-pin 4.4-mm TSSOP - TUBE,Pb Free
Commercial
ASM5I2305AF-1-08-TT
5I2305AF-1
8-pin 4.4-mm TSSOP - TUBE,Pb Free
Industrial
ASM5P2305AF-1-08-TR
5P2305AF-1
8-pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Commercial
ASM5I2305AF-1-08-TR
5I2305AF-1
8-pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Industrial
ASM5P2305AF-1H-08-ST
5P2305AF-1H
8-pin 150-mil SOIC-TUBE,Pb Free
Commercial
ASM5I2305AF-1H-08-ST
5I2305AF-1H
8-pin 150-mil SOIC- TUBE,Pb Free
Industrial
ASM5P2305AF-1H-08-SR
5P2305AF-1H
8-pin 150-mil SOIC-TAPE & REEL,Pb Free
Commercial
ASM5I2305AF-1H-08-SR
5I2305AF-1H
8-pin 150-mil SOIC-TAPE & REEL,Pb Free
Industrial
ASM5P2305AF-1H-08-TT
5P2305AF-1H
8-pin 4.4-mm TSSOP - TUBE,Pb Free
Commercial
ASM5I2305AF-1H-08-TT
5I2305AF-1H
8-pin 4.4-mm TSSOP - TUBE,Pb Free
Industrial
ASM5P2305AF-1H-08-TR
5P2305AF-1H
8-pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Commercial
ASM5I2305AF-1H-08-TR
5I2305AF-1H
8-pin 4.4-mm TSSOP - TAPE & REEL,Pb Free
Industrial
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
17 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Ordering Codes (cont’d)
Ordering Code
Marking
Package Type
Operating Range
ASM5P2309AG-1-16-ST
5P2309AG-1
16-pin 150-mil SOIC-TUBE, Green
Commercial
ASM5I2309AG-1-16-ST
5I2309AG-1
16-pin 150-mil SOIC- TUBE, Green
Industrial
ASM5P2309AG-1-16-SR
5P2309AG-1
16-pin 150-mil SOIC-TAPE & REEL, Green
Commercial
ASM5I2309AG-1-16-SR
5I2309AG-1
16-pin 150-mil SOIC-TAPE & REEL, Green
Industrial
ASM5P2309AG-1-16-TT
5P2309AG-1
16-pin 4.4-mm TSSOP - TUBE, Green
Commercial
ASM5I2309AG-1-16-TT
5I2309AG-1
16-pin 4.4-mm TSSOP - TUBE, Green
Industrial
ASM5P2309AG-1-16-TR
5P2309AG-1
16-pin 4.4-mm TSSOP - TAPE & REEL, Green
Commercial
ASM5I2309AG-1-16-TR
5I2309AG-1
16- pin 4.4-mm TSSOP - TAPE & REEL, Green
Industrial
ASM5P2309AG-1H-16-ST
5P2309AG-1H
16-pin 150-mil SOIC-TUBE, Green
Commercial
ASM5I2309AG-1H-16-ST
5I2309AG-1H
16-pin 150-mil SOIC- TUBE, Green
Industrial
ASM5P2309AG-1H-16-SR
5P2309AG-1H
16-pin 150-mil SOIC-TAPE & REEL, Green
Commercial
ASM5I2309AG-1H-16-SR
5I2309AG-1H
16-pin 150-mil SOIC-TAPE & REEL, Green
Industrial
ASM5P2309AG-1H-16-TT
5P2309AG-1H
16-pin 4.4-mm TSSOP - TUBE, Green
Commercial
ASM5I2309AG-1H-16-TT
5I2309AG-1H
16-pin 4.4-mm TSSOP - TUBE, Green
Industrial
ASM5P2309AG-1H-16-TR
5P2309AG-1H
16-pin 4.4-mm TSSOP - TAPE & REEL, Green
Commercial
ASM5I2309AG-1H-16-TR
5I2309AG-1H
16-pin 4.4-mm TSSOP - TAPE & REEL, Green
Industrial
ASM5P2305AG-1-08-ST
5P2305AG-1
8-pin 150-mil SOIC-TUBE, Green
Commercial
ASM5I2305AG-1-08-ST
5I2305AG-1
8-pin 150-mil SOIC- TUBE, Green
Industrial
ASM5P2305AG-1-08-SR
5P2305AG-1
8-pin 150-mil SOIC-TAPE & REEL, Green
Commercial
ASM5I2305AG-1-08-SR
5I2305AG-1
8-pin 150-mil SOIC-TAPE & REEL, Green
Industrial
ASM5P2305AG-1-08-TT
5P2305AG-1
8-pin 4.4-mm TSSOP - TUBE, Green
Commercial
ASM5I2305AG-1-08-TT
5I2305AG-1
8-pin 4.4-mm TSSOP - TUBE, Green
Industrial
ASM5P2305AG-1-08-TR
5P2305AG-1
8-pin 4.4-mm TSSOP - TAPE & REEL, Green
Commercial
ASM5I2305AG-1-08-TR
5I2305AG-1
8-pin 4.4-mm TSSOP - TAPE & REEL, Green
Industrial
ASM5P2305AG-1H-08-ST
5P2305AG-1H
8-pin 150-mil SOIC-TUBE, Green
Commercial
ASM5I2305AG-1H-08-ST
5I2305AG-1H
8-pin 150-mil SOIC- TUBE, Green
Industrial
ASM5P2305AG-1H-08-SR
5P2305AG-1H
8-pin 150-mil SOIC-TAPE & REEL, Green
Commercial
ASM5I2305AG-1H-08-SR
5I2305AG-1H
8-pin 150-mil SOIC-TAPE & REEL, Green
Industrial
ASM5P2305AG-1H-08-TT
5P2305AG-1H
8-pin 4.4-mm TSSOP - TUBE, Green
Commercial
ASM5I2305AG-1H-08-TT
5I2305AG-1H
8-pin 4.4-mm TSSOP - TUBE, Green
Industrial
ASM5P2305AG-1H-08-TR
5P2305AG-1H
8-pin 4.4-mm TSSOP - TAPE & REEL, Green
Commercial
ASM5I2305AG-1H-08-TR
5I2305AG-1H
8-pin 4.4-mm TSSOP - TAPE & REEL, Green
Industrial
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
18 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Device Ordering Information
A S M 5 P 2 3 0 5 A F - 0 8 - T R
R = Tape & reel, T = Tube or Tray
O = SOT
S = SOIC
T = TSSOP
A = SSOP
V = TVSOP
B = BGA
Q = QFN
U = MSOP
E = TQFP
L = LQFP
U = MSOP
P = PDIP
D = QSOP
X = SC-70
DEVICE PIN COUNT
F = LEAD FREE AND RoHS COMPLIANT PART
G = GREEN PACKAGE
PART NUMBER
X= Automotive
I= Industrial
P or n/c = Commercial
(-40C to +125C) (-40C to +85C)
(0C to +70C)
1 = Reserved
2 = Non PLL based
3 = EMI Reduction
4 = DDR support products
5 = STD Zero Delay Buffer
6 = Power Management
7 = Power Management
8 = Power Management
9 = Hi Performance
0 = Reserved
ALLIANCE SEMICONDUCTOR MIXED SIGNAL PRODUCT
Licensed under US patent #5,488,627, #6,646,463 and #5,631,920.
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
19 of 20
ASM5P2309A
ASM5P2305A
September 2005
rev 1.6
Alliance Semiconductor Corporation
2575 Augustine Drive,
Santa Clara, CA 95054
Tel# 408-855-4900
Fax: 408-855-4999
www.alsc.com
Copyright © Alliance Semiconductor
All Rights Reserved
Part Number: ASM5P2309A
ASM5P2305A
Document Version: 1.6
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to Alliance Semiconductor, dated 11-11-2003
© Copyright 2003 Alliance Semiconductor Corporation. All rights reserved. Our three-point logo, our name and Intelliwatt are
trademarks or registered trademarks of Alliance. All other brand and product names may be the trademarks of their
respective companies. Alliance reserves the right to make changes to this document and its products at any time without
notice. Alliance assumes no responsibility for any errors that may appear in this document. The data contained herein
represents Alliance's best data and/or estimates at the time of issuance. Alliance reserves the right to change or correct this
data at any time, without notice. If the product described herein is under development, significant changes to these
specifications are possible. The information in this product data sheet is intended to be general descriptive information for
potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or
customer. Alliance does not assume any responsibility or liability arising out of the application or use of any product described
herein, and disclaims any express or implied warranties related to the sale and/or use of Alliance products including liability or
warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except
as express agreed to in Alliance's Terms and Conditions of Sale (which are available from Alliance). All sales of Alliance
products are made exclusively according to Alliance's Terms and Conditions of Sale. The purchase of products from Alliance
does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual
property rights of Alliance or third parties. Alliance does not authorize its products for use as critical components in
life-supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user,
and the inclusion of Alliance products in such life-supporting systems implies that the manufacturer assumes all risk of such
use and agrees to indemnify Alliance against all claims arising from such use.
3.3V Zero Delay Buffer
Notice: The information in this document is subject to change without notice.
20 of 20
Similar pages