Philips Semiconductors Product specification Damper diode fast, high-voltage FEATURES BY359-1500, BY359-1500S SYMBOL • Low forward volt drop • Fast switching • Soft recovery characteristic • High thermal cycling performance • Low thermal resistance QUICK REFERENCE DATA VR = 1500 V k 1 VF ≤ 1.8 V / 2 V a 2 IF(RMS) = 15.7 A IFSM ≤ 60 A trr ≤ 600 ns / 350 ns GENERAL DESCRIPTION Glass-passivated double diffused rectifier diode featuring low forward voltage drop, fast reverse recovery and soft recovery characteristic. The device is intended for use in TV receivers and PC monitors. PINNING PIN SOD59 (TO220AC) DESCRIPTION 1 cathode 2 anode tab tab cathode The BY359 series is supplied in the conventional leaded SOD59 (TO220AC) package. 1 2 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER VRSM Peak non-repetitive reverse voltage Peak repetitive reverse voltage Crest working reverse voltage Peak forward current VRRM VRWM IF(peak) IF(RMS) IFRM IFSM RMS forward current Peak repetitive forward current Peak non-repetitive forward current Tstg Tj Storage temperature Operating junction temperature CONDITIONS 16-32kHz TV 31-70kHz monitor BY359-1500 BY359-1500S sinusoidal; a = 1.57 t = 10 ms t = 8.3 ms sinusoidal; Tj = 150 ˚C prior to surge; with reapplied VRWM(max) MIN. MAX. UNIT - 1500 V - 1500 1300 10 7 15.7 60 60 66 V V A A A A A A -40 - 150 150 ˚C ˚C THERMAL RESISTANCES SYMBOL PARAMETER Rth j-mb Thermal resistance junction to mounting base Thermal resistance junction to ambient Rth j-a September 1998 CONDITIONS in free air. 1 MIN. TYP. MAX. UNIT - - 2.0 K/W - 60 - K/W Rev 1.300 Philips Semiconductors Product specification Damper diode fast, high-voltage BY359-1500, BY359-1500S STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated BY359-1500 BY359-1500S SYMBOL PARAMETER CONDITIONS TYP. MAX. TYP. MAX. UNIT VF Forward voltage IR Reverse current IF = 20 A IF = 10 A; Tj = 150˚C VR = 1300 V VR = 1300 V; Tj = 100 ˚C 1.3 1.00 10 50 1.8 1.5 100 300 1.5 1.25 10 100 2.0 1.75 100 600 V V µA µA DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated BY359-1500 BY359-1500S SYMBOL PARAMETER CONDITIONS TYP. MAX. TYP. MAX. UNIT trr Qs Reverse recovery time Reverse recovery charge IF = 2 A; VR ≥ 30 V; -dIF/dt = 20 A/µs 0.47 1.6 0.60 2.0 0.28 0.70 0.35 0.95 µs µC Vfr Peak forward recovery voltage IF = 10 A; dIF/dt = 30 A/µs 11.0 - 17.0 - V I dI F I F F dt trr time time VF Qs I R I 25% 100% V fr VF rrm time Fig.1. Definition of trr, Qs and Irrm September 1998 Fig.2. Definition of Vfr 2 Rev 1.300 Philips Semiconductors Product specification Damper diode fast, high-voltage BY359-1500, BY359-1500S BY359 IFS(RMS) / A 80 IF / A BY359 30 Tj=150C 70 Tj=25C IFSM 60 20 50 40 30 10 typ 20 10 max 0 1ms 10ms 0.1s tp / s 1s 0 10s 0 2.0 VF / V Fig.5. BY359-1500 forward characteristic IF = f(VF); parameter Tj Fig.3. Maximum non-repetitive rms forward current. IF = f(tp); sinusoidal current waveform; Tj = 150˚C prior to surge with reapplied VRWM. 10 1.0 Transient thermal impedance, Zth j-mb (K/W) BY359S IF / A 30 Tj=150C Tj=25C 1 20 0.1 PD 0.01 0.001 1us tp D= T 10us 10 tp T max t 100us 1ms 10ms 100ms 1s pulse width, tp (s) BY359 0 10s 0 1.0 2.0 VF / V Fig.4. Transient thermal impedance Zth = f(tp) September 1998 typ Fig.6. BY359-1500S forward characteristic IF = f(VF); parameter Tj 3 Rev 1.300 Philips Semiconductors Product specification Damper diode fast, high-voltage BY359-1500, BY359-1500S MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 (2x) 2 0,9 max (2x) 5,08 0,6 2,4 Fig.7. SOD59 (TO220AC). pin 1 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8". September 1998 4 Rev 1.300 Philips Semiconductors Product specification Damper diode fast, high-voltage BY359-1500, BY359-1500S DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1998 5 Rev 1.300