Components ET05LF1CSE Sealed subminiature toggle switch Datasheet

ET Series
Sealed Subminiature Toggle Switches
Features/Benefits
• Sealed against solder and cleaning
process contaminants
• ESD protection available
• Thru-hole and surface mount models
• Compact size and small footprint
Typical Applications
• Hand-held telecommunications
• Instrumentation
• Medical equipment
save PCB space
• RoHS compliant models available
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @
20 V AC or DC max. See page F-35 for additional ratings.
ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break cycles at
full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4
V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
ELECTROSTATIC DISCHARGE (ESD) RESISTANT OPTION:
M3 & S3 insulating actuator only: 9,000 V DC min. @ sea level,
actuator to terminals. F1 conductive bushing only: Dissipates
up to 20,000 V DC from actuator to ground. M3 & S3 actuator
and F1 bushing options are not recommended for use together.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
DEGREE OF PROTECTION: IP57; Protection against harmful dust
deposit, full-scale voltage protection, temporary immersion.
PACKAGING: Surface mount switches are shipped in tape and reel
packaging, see page F-31 for drawings and reel information.
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0) or glass filled 4/6 nylon, flame retardant, heat
stabilized (UL 94V-0). F1 conductive bushing option is impregnated
with carbon fibers.
ACTUATOR: M3 & S3 anti-static actuator: Nylon 4/6, black standard
(UL 94V-0). All other actuators: Brass, chrome plated. Internal
o-ring seal standard with all actuators.
SWITCH SUPPORT: Brass, tin plated.
CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See F-35 for additional contact materials.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B, G, P or R contact material are RoHS compliant
and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F–26 thru F–31. For additional options not shown in catalog, consult our Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
ET01 SP, On-None-On
ET02 SPST, Off-None-On
ET03 SP, On-Off-On
ET05 SP, Mom.-Off-Mom.
ET07 SP, On-Off-Mom.
ET08 SP, On-None-Mom.
ET21 DP, On-None-On
ET23 DP, On-Off-On
ET24 DP, On-On-On
ET25 DP, Mom.-Off-Mom.
ET27 DP, On-Off-Mom.
ET28 DP, On-None-Mom.
Actuator
M .240" high
M3 Plastic, anti-static,
.240" high
S .400" high
L .320" high
S1 .540" high
Bushing
D1 .177" High, Unthreaded
F1 .177" high, unthreaded, ESD conductive
Seal
E Epoxy
Plastic Actuator Color
NONE No actuator color
2 Black
1 White
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–25
www.ck-components.com
F
Toggle
Terminations
Right angle, PC thru-hole
A
AV Vertical right angle, PC thru-hole
C
PC Thru-hole
SA Right angle, surface mount
SA1 Right angle, surface mount rear-facing
V3 Vertical mount, V-bracket
Contact Material
AV3 Vertical right angle, snap-in, PC thru-hole
B Gold
V31 Vertical mount, V-bracket, snap-in
P Gold, matte tin
W Wire wrap
Q Silver
S Silver/matte-tin
G Gold over silver
R Gold over silver,
matte-tin
ET Series
Sealed Subminiature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
POS. 2
POS. 3
NO.
POLES
MODEL
NO.
POS. 1
C&K marking on opposite side
ET01
ON
NONE
ON
ET03
ON
OFF
ON
ET05
MOM.
OFF
MOM.
ET07
ON
OFF
MOM.
ET08
ON
NONE
ET02
OFF
NONE
CONNECTED TERMINALS
POS. 2
POS. 3
C&K marking on opposite side
SCHEMATIC
2-3
N/A
2-1
2-3
OPEN
2-1
MOM.
2-3
N/A
2-1
SPDT
ON
OPEN
N/A
3-1
SPST
SP
SPDT
Terminal Nos.
For Reference Only
Part number shown: ET01MD1CBE
ET02 Models: Omit terminal 2
ET21
ON
NONE
ON
ET23
ON
OFF
ON
ET25
MOM.
OFF
MOM.
ET27
ON
OFF
MOM.
ET28
ON
NONE
MOM.
ET24**
ON
ON
ON
2-3,5-6
N/A
2-1,5-4
2-3,5-6
OPEN
2-1,5-4
2-3,5-6
N/A
2-1,5-4
2-3,5-6
2-3,5-4
2-1,5-4
DP
DPDT
DPDT
Terminal Nos.
For Reference Only
Part number shown: ET21MD1CBE
MOM. = Momentary
** Wiring for 3-way switch, see Section N.
with all options (except M3 actuator) when ordered with G, L, R or Q contact material except
All models
with F1 conductive bushing.
Toggle
F
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–26
www.ck-components.com
ET Series
Sealed Subminiature Toggle Switches
ACTUATOR COLOR
ACTUATOR
M
M3
.240" HIGH
Material: Nylon 4/6 (UL 94V-0), black standard.
Static resistance: 9,000 V DC min. @ sea level,
actuator to terminals. Not available with F1
conductive bushing option. Not UL approved.
Standard with A, AV, V3 & V31 terminations.
S1
S
PLASTIC, ANTISTATIC,
.240" HIGH
L
.400" HIGH
.320" HIGH
Standard with C or W terminations.
.540" HIGH
OPTION
CODE
PLASTIC
ACTUATOR COLOR
(NONE)
BLACK (M3 & S3 only)
1
WHITE (M3 & S3 only)
NOTE: All actuators have chrome finish (except M3 & S3 ).
BUSHING
D1
F1
.177" HIGH, UNTHREADED
ESD, CONDUCTIVE BUSHING
UNTHREADED, .177" HIGH
F1 bushing is not UL/CSA approved
NOTE: ESD protection depends on proper grounding of switch support bracket. F1 conductive bushing option is
impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 20,000 V from actuator to ground.
Available with all metal actuator options and A, AV, AV3, V3 and V31 termination options only.
Internal actuator o-ring seal standard.
TERMINATIONS
C
W
PC THRU-HOLE
SP
DP
WIRE WRAP
SP
DP
PC MOUNTING
SP
DP
ET02 – omit center hole.
F
SP and DP
Not available with F1 conductive bushing.
SP and DP
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–27
www.ck-components.com
Toggle
Not available with F1 conductive bushing.
ET Series
Sealed Subminiature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
ET01MD1ABE
Horizontal Actuation
SPDT
Actuator Shown In Pos. 1
Not available with ET02 model.
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
ET21MD1ABE
Horizontal Actuation
DPDT
AV
Actuator Shown In Pos. 1
VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
ET01MD1AVBE
Vertical Actuation
Actuator Shown In Pos. 1
SPDT
ET02 - omit terminal 2.
AV
NOTE: Terminal bend radii and lead-in manufacturing option.
VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
Toggle
F
ET21MD1AVBE
Vertical Actuation
DPDT
Actuator Shown In Pos. 1
NOTE: Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–28
www.ck-components.com
ET Series
Sealed Subminiature Toggle Switches
TERMINATIONS
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
ET01SD1AV2BE
Vertical Actuation
SPDT
Actuator Shown In Pos. 1
SA
RIGHT ANGLE, SURFACE MOUNT
PC MOUNTING
ET01M3D1SAPE
Actuator Shown
In Pos. 1
Horizontal Actuation
SPDT Only
Not available with S and S1 actuators. Standard with tape & reel packaging, See page F-31.
SA1
RIGHT ANGLE, SURFACE MOUNT
.276
(7,0)
.041
(1,04)
.354
(9,00)
ø.099
(2,51Ø)
ø.181
(4,60)
EPOXY SEAL
.020 TYP
(0,51)
Not available in ET02 .
Actuators M and M3, bushing D1, contact material B.
Standard with tape and reel packaging-see page F-31
V3
V31
.272
(6,90)
.059
(1,50)
.403
(10,24)
.171
(4,35)
.403
(10,24)
.032 TYP.
(0,80)
.051
(1,30)
.121
(3,07)
.217
(5,51)
.234
(5,94)
.200
(5,08)
.071 TYP.
(1,80)
.059
(1,50)
.079 TYP.
(2,0)
ET01M3D1SA1BE
.100
(2,54)
Horizontal Actuation
SPDT Only
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
ET02 Models: Omit center hole.
V31 Snap-In
F
ET01MD1V3BE
Actuator Shown In Pos. 1
ET02 Models: Omit terminal 2
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–29
www.ck-components.com
Toggle
SPDT
ET Series
Sealed Subminiature Toggle Switches
TERMINATIONS
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
ET21MD1V3BE
DPDT
Actuator Shown In Pos. 1
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
B
P
GOLD 1
Q
SILVER 4,5
TERMINAL
PLATING
GOLD 1
RATINGS
LOW LEVEL/DRY CIRCUIT
ETX1 MODELS:
3 AMPS @ 120 V AC OR 28 V DC
SILVER 5
POWER
MATTE-TIN 6
S
G
GOLD OVER SILVER 2,3
R
0.4 VA MAX. @ 20 V AC OR DC MAX.
MATTE-TIN 6
GOLD 3
LOW LEVEL/DRY
MATTE-TIN 6
CIRCUIT OR POWER
ALL OTHER MODELS:
2 AMPS @ 120 V AC OR 28 V DC
ETX1 MODELS:
0.4 VA MAX. @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V
AC OR 28 V DC
ALL OTHER MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX.
OR 2 AMPS @ 120 V AC OR 28 V DC
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate.
4
END CONTACTS: Coin silver, silver plated.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6
TERMINALS: Copper alloy, with matte tin over nickel plate.
NOTE: Any models supplied with Q, B , G, P or R contact material are RoHS compliant.
All models
with all options (except M3 actuator)
when ordered with G, L, R or Q contact material except with F1 conductive bushing.
SEAL
E
EPOXY SEAL
AVAILABLE HARDWARE
Cap
.338
(8,59)
PART NO.
WHITE
BLACK
RED
Material: Vinyl
Finish: Matte
NOTE: Other colors available,
consult Customer Service Center.
Toggle
F
706201000
706202000
706203000
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–30
www.ck-components.com
ET Series
Sealed Subminiature Toggle Switches
TAPE & REEL
For part number ET01M3D1SAKE
REEL INFORMATION
OUTSIDE DIAMETER
PILOT HOLE
13.00 (330,0)
.512 (13,0)
QUANTITY PER REEL
600
For part number ET01M3D1SA1BE
0.630
(16,00)
0.157
(4,0)
0.079
(2,0)
ø 0.059
(1,50)
0.297
(7,55)
0.069
(1,75)
0.014
(0,35)
REEL INFORMATION
0.795
(20,2)
OUTSIDE DIAMETER
13.00 (330,0)
PILOT HOLE
.795 (20,20)
QUANTITY PER REEL
1.732
(44,0)
500
0.996
(25,30)
FEED DIRECTION
F
Toggle
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–31
www.ck-components.com
Similar pages