SH6G Series Mini 6-Pin SMD Passive Delay Modules IN 1 6 COM Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55OC to +125OC 2 5 COM OUT 3 4 COM 1 6 2 5 3 4 .315 (8.00) MAX. .170 (4.32) MAX. .010 (0.25) .020 (0.38) TYP. TYP. .425 (10.80) .405 (10.29) DIP version available: SH6D Series Electrical Specifications at 25OC 1, 2, 3, 4 Dimensions in Inches (mm) .270 (6.86) .286 (7.27) Standard Impedances: 50, 75, 100 Ω For other impedances (up to 500Ω) visit web page or contact factory Low Distortion LC Network SH6G Schematic .100 (2.54) TYP. Delay (ns) Rise Time 10%-90% max. (ns) DCR max. (Ohms) 50 Ohm Part Number 75 Ohm Part Number 100 Ohm Part Number 1.0 ± .20 1.5 ± .20 2.0 ± .20 2.5 ± .25 3.0 ± .30 4.0 ± .40 5.0 ± .40 6.0 ± .40 7.0 ± .40 7.5 ± .40 8.0 ± .40 9.0 ± .50 10.0 ± .60 12.0 ± .60 0.70 0.80 0.90 1.00 1.20 1.50 1.80 2.20 2.40 2.50 2.60 2.80 3.00 3.30 0.35 0.35 0.35 0.40 0.40 0.45 0.50 0.55 0.55 0.60 0.75 0.75 0.80 0.85 SH6G-0105 SH6G-0155 SH6G-0205 SH6G-0255 SH6G-0305 SH6G-0405 SH6G-0505 SH6G-0605 SH6G-0705 SH6G-0755 SH6G-0805 SH6G-0905 SH6G-1005 SH6G-1105 SH6G-0107 SH6G-0157 SH6G-0207 SH6G-0257 SH6G-0307 SH6G-0407 SH6G-0507 SH6G-0607 SH6G-0707 SH6G-0757 SH6G-0807 SH6G-0907 SH6G-1007 SH6G-1107 SH6G-0101 SH6G-0151 SH6G-0201 SH6G-0251 SH6G-0301 SH6G-0401 SH6G-0501 SH6G-0601 SH6G-0701 SH6G-0751 SH6G-0801 SH6G-0901 SH6G-1001 SH6G-1101 1. Rise Times are measured 20% to 80% points. 2. Delay Times measured at 50% points of leading edge. 3. Impedance, ZO, tolerance + 10 % 4. Output terminated to ground through RL= ZO .038 (0.96) TYP. AML1 Series Mini 16-Pin 50-mil SMD Passive Delay Modules Low Distortion LC Network Stable Delay vs. Temperature: 100 ppm/OC O Dimensions in Inches (mm) .285 (7.24) .505 (12.83) MAX. MAX. O Operating Temp. Range -55 C to +125 C MAX. TYP. TYP. COM COM 16 15 14 13 12 11 10 3 4 5 6 7 IN 9 8 100% 6SHFLILFDWLRQV VXEMHFW WR FKDQJH ZLWKRXW QRWLFH www.rhombus-ind.com UKRPEXV LQGXVWULHV LQF TYP. .025 (0.64) TYP. .010 (0.25) TYP. .380 (9.65) .360 (9.14) Electrical Specifications at 25OC 1, 2, 3, 4 (refer to Notes 1-4 above) AML1 Schematic 2 .015 (0.38) .050 (1.27) .016 (0.41) 1 .205 (5.21) AML1 Series Standard Impedances: 50, 75, 100 Ω For other impedances (up to 500Ω) visit web page or contact factory Delay (ns) Rise Time 20% - 80% max. (ns) DCR max. (Ohms) 50 Ohm Part Number 75 Ohm Part Number 100 Ohm Part Number 200 Ohm Part Number 1.0 ± .20 1.5 ± .20 2.0 ± .20 2.5 ± .20 3.0 ± .20 4.0 ± .20 5.0 ± .25 6.0 ± .30 7.0 ± .30 8.0 ± .30 9.0 ± .30 10 ± .30 12 ± .50 15 ± .70 20 ± 1.0 1.6 1.6 1.6 1.6 1.7 1.7 1.8 2.0 2.2 2.4 2.6 2.8 3.2 3.8 4.8 .20 .30 .40 .50 .60 .70 .80 .85 .90 .95 1.10 1.20 1.50 1.70 2.00 AML1-1-50 AML1-1P5-50 AML1-2-50 AML1-2P5-50 AML1-3-50 AML1-4-50 AML1-5-50 AML1-6-50 AML1-7-50 AML1-8-50 AML1-9-50 AML1-10-50 AML1-12-50 AML1-15-50 AML1-20-50 AML1-1-75 AML1-1P5-75 AML1-2-75 AML1-2P5-75 AML1-3-75 AML1-4-75 AML1-5-75 AML1-6-75 AML1-7-75 AML1-8-75 AML1-9-75 AML1-10-75 AML1-12-75 AML1-15-75 AML1-20-75 AML1-1-10 AML1-1P5-10 AML1-2-10 AML1-2P5-10 AML1-3-10 AML1-4-10 AML1-5-10 AML1-6-10 AML1-7-10 AML1-8-10 AML1-9-10 AML1-10-10 AML1-12-10 AML1-15-10 AML1-20-10 AML1-1-20 AML1-1P5-20 AML1-2-20 AML1-2P5-20 AML1-3-20 AML1-4-20 AML1-5-20 AML1-6-20 AML1-7-20 AML1-8-20 AML1-9-20 AML1-10-20 AML1-12-20 AML1-15-20 AML1-20-20 )RU RWKHU YDOXHV &XVWRP 'HVLJQV FRQWDFW IDFWRU\ [email protected] 4 TEL: (714) 898-0960 FAX: (714) 896-0971 SH6G 2001-01