February 1, 2007 DR366-1 Series Radial Leaded Shielded Inductors Features z z z z Height: 9.8mm Max Inductance Range: 1µH – 1.5mH Non-RoHS Versions are Available (Note 4) Meets UL 94V-0 ELECTRICAL SPECIFICATIONS AT 25°C OPERATING TEMPERATURE -20°C to +80°C Part Number Inductance (µH) @1kHz Q Min. Q Test Freq. SRF (MHz) Ref. DCR (Ω) Max. Rated Current (A) Max. I sat Rated Current (A) Max. I rms DR366-1-102 DR366-1-152 DR366-1-222 DR366-1-332 DR366-1-472 DR366-1-682 DR366-1-103 DR366-1-153 DR366-1-223 DR366-1-333 DR366-1-473 DR366-1-683 DR366-1-104 DR366-1-154 DR366-1-224 DR366-1-334 DR366-1-474 DR366-1-684 DR366-1-105 DR366-1-155 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 10 10 10 10 10 10 20 20 20 20 20 20 20 20 20 20 20 20 70 50 7.96MHz 7.96MHz 7.96MHz 7.96MHz 7.96MHz 7.96MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 252kHz 252kHz 70 56 45 36 29 24 19 15 12 9.4 7.6 6.2 5.0 4.0 3.2 2.5 2.0 1.7 1.3 1.3 0.006 0.008 0.011 0.018 0.022 0.028 0.043 0.056 0.086 0.14 0.17 0.28 0.33 0.56 0.72 1.1 1.7 2.3 4.3 5.0 6.6 5.4 4.0 3.6 3.1 2.5 2.1 1.7 1.4 1.1 0.96 0.79 0.66 0.53 0.44 0.36 0.30 0.25 0.20 0.17 5.0 4.3 3.7 2.9 2.6 2.3 1.9 1.6 1.3 1.0 0.94 0.73 0.67 0.52 0.46 0.37 0.30 0.26 0.19 0.16 NOTES: 1.) All dimensions are in inches/mm 2.) Tolerance: .012/0.3 3.) DR366-1-102 to DR366-1-682 inductance tolerance is ±20%, DR366-1-103 to DR366-1-155 inductance tolerance is ±10% 4.) For non-RoHs parts, replace DR prefix with 42- (e.G. DR366-1-472 becomes 42-366-1-472) 5.) Terminal finish is compliant to RoHs requirements 6.) Isat is the current level when the inductance drops 20% from its initial value 7.) Irms is the current level when the part reaches a temperature rise of 25°C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. Page 1 of 2 February 1, 2007 DR366-1 Series Radial Leaded Shielded Inductors MECHANICAL OUTLINE XXX 1 Ø .025 0,65 .196 5,0 2 .385 MAX. 9,8 Ø .318 MAX. 8,1 .236 MIN. 6,0 1 2 SCHEMATIC DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. Page 2 of 2