BC847BS-AU NPN GENERAL PURPOSE DUAL TRANSISTOR 150 mWatts FEATURES 0.018(0.45) 0.006(0.15) POWER 0.087(2.20) 0.074(1.90) • General purpose amplifier applications 0.030(0.75) 0.021(0.55) • PNP epitaxial silicon, planar design • Lead free in comply with EU RoHS 2011/65/EU directives • Green molding compound as per IEC61249 Std. . (Halogen Free) • Acqire quality system certificate : TS16949 • AEC-Q101 qualified 0.010(0.25) 0.087(2.20) 0.078(2.00) 45 Volts 0.054(1.35) 0.045(1.15) 0.010(0.25) 0.003(0.08) 0.056(1.40) MECHANICAL DATA 0.047(1.20) 0.040(1.00) 0.031(0.80) VOLTAGE • Case : SOT-363, Plastic • Terminals : Solderable per MIL-STD-750, Method 2026 0.012(0.30) 0.005(0.15) 0.044(1.10) MAX. • Marking : 47S 0.004(0.10) 0.000(0.00) • Approx. Weight : 0.006 gram ABSOLUTE MAXIMUM RATINGS Parameter Symbol Value Units Collector - Emitter Voltage VCEO 45 V Collector - Base Voltage VCBO 50 V Emitter - Base Voltage V EBO 6 V IC 100 mA Collector Current - C ontinuous THERMAL CHARACTERISTICS Symbol Value Units Total Device Dissipation Per Device FR-5 Board (Note 1)TA=25OC Derate above 25 OC Parameter PD 300 150 3 mW mW mW/OC Thermal Resistance , Junction to Ambient (Note 2) RJA 550 Junction Temperature TJ -55 to 150 O Storage Temperature TSTG -55 to 150 O C/W O C C Note : 1.FR-5 board 1 x 0.75 x 0.062 in. 2.Mounted on an FR4 PCB, single-sided copper, mini pad. April 3,2013-REV.04 PAGE . 1 BC847BS-AU ELECTRICAL CHARACTERISTICS (TJ=25OC, unless otherwise noted) P a r a me te r S ymb o l Te s t C o nd i ti o n Mi n. Typ . M a x. Uni t OF F C HA RA C TE RIS TIC S C o lle c to r - E mi tte r B r e a k d o wn V o lta g e V ( B R) C E O I C = 1 0 mA 45 - - V C o lle c to r - E mi tte r B r e a k d o wn V o lta g e V (B R) C E S IC = 1 0 A , V E B = 0 50 - - V C o lle c to r - B a s e B re a k d o wn V o lta g e V ( B R) C B O IC = 1 0 A 50 - - V E m i tte r - B a s e B re a k d o wn Vo lta g e V (B R) E B O IE = 1 A 6 - - V IC B O V C B = 3 0 V, V C B = 3 0 V, T A = 1 5 0 O C - - 15 5 hFE I C = 2 mA , V C E = 5 V 200 - 450 - C o lle c to r C uto ff C ur re nt nA A ON C HA RA C TE RIS TIC S D C C urre nt Ga i n C o lle c to r - E mi tte r S a tur a ti o n Vo lta g e V C E (S AT) I C = 1 0 mA , I B = 0 . 5 mA I C = 1 0 0 mA , I B = 5 m A - - 0 .2 5 0 .6 V B a s e - E m i tte r S a tura ti o n Vo lta g e V B E (S AT) I C = 1 0 mA , I B = 0 . 5 mA I C = 1 0 0 mA , I B = 5 m A 0 .6 0 .8 - 0 .9 1 V B a s e - E m i tte r Vo lta g e V B E ( ON) I C = 2 mA , V C E = 5 V I C = 1 0 mA , V C E = 5 V 580 - 660 - 700 770 mV I C = 1 0 mA ,V C E = 5 V d c ,f= 1 0 0 MH Z 100 - - MHZ S M A L L -S IGNA L C HA RA C TE RIS TIC S C ur re nt- Ga i n- B a nd wi d th P ro d uc t fT Outp ut C a p a c i ta nc e C obo V C B = 1 0 V, f= 1 M H Z - - 4 .5 pF No i s e F i g ur e NF I C = 0 .2 m A ,V C E = 5 V d c , R S = 2 k , f= 1 . 0 k H Z , B W=200HZ - - 10 dB 6 5 4 1 2 3 Fig.54 April 3,2013-REV.04 PAGE . 2 BC847BS-AU 2.0 1.0 V CE =10V O T A =25 C 1.5 T A =25 OC 0.8 V, VOLTAGE (VOLTS) hFE, NORMALIZED DC CURRENT GAIN ELECTRICAL CHARACTERISTICS CURVE 1.0 0.8 0.6 0.4 V BE (on) @ V CE =10V 0.6 0.4 0.2 0.3 V CE (sat) @ I C /I B =10 0.2 0 0.5 0.2 1.0 5.0 2.0 10 20 100 50 200 0.1 0.2 0.3 0.5 0.7 1.0 Figure 1. Normalized DC Current Gain 5.0 7.0 10 20 30 50 70 100 Figure 2. "Saturation" and " On " Voltages 2.0 O qVB, TEMPER ATURE COEFFI CIENT (mA/ C) 1.0 O T A =25 C 1.6 200mA 1.2 I C= I C= 10mA 2 0mA 100mA 50mA 0.8 0.4 O O -55 C to 125 C 1.2 1.6 2.0 2.4 2.8 0 0.1 0.02 1.0 10 20 0.2 1.0 I B , BASE CURRENT (mA) Cio 30 Cob 2.0 1.0 0.4 0.6 0.8 1.0 2.0 4.0 6.0 8.0 10 20 V R , REVERSE VOLTAGE (VOLTS) Figure 5. Capacitance April 3,2013-REV.04 40 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) O T A =25 C 50 100 Figure 4. Base-Emitter Temperature Coefficient 10 7.0 10 I C , COLLECTOR CURRENT (mA) Figure 3. Collector Saturation Region C, CAPACITA NCE (pF) 2.0 3.0 I C , COLLECTOR CURRENT(mAdc) I C , COLLECTOR CURRENT(mAdc) V CE , COLLECTOR-EMITTER VOLTAGE (VOLTS) V BE (sat) @ I C /I B =10 400 300 200 V CE =10V O T A =25 C 100 80 60 40 30 20 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 50 I C , COLLECTOR CURRENT (mAdc) Figure 6. Current-Gain-Bandwidth Product PAGE . 3 BC847BS-AU ELECTRICAL CHARACTERISTICS CURVE r(t), TRANSIEN T THERMAL RESISTAN CE(NORM ALIZED) 1.0 D-0.5 0.2 0.1 0.1 0.05 0.02 0.01 Z q JA (t)=r(t) R q JA R q JA =328 OC/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t 1 T J(pk) -TC=P (pk) R q JC (t) P(pk) t1 0.01 t2 DUTY CYCLE, D-t1/t2 SINGEL PULSE 0.001 0 10 1.0 100 1.0K t, TIME(ms) 10K 100K 1.0M Figure 7. Thermal Response I C , COLLECTO R CURRENT (mA) -200 3ms 1s -100 T J =25 OC O T A =25 C -50 BC558 BC557 BC556 -10 The safe operating area curves indicate Ic-Vce limits of the transistor that must be observed for reliable operation. Collector load lines for specific circuits must fall below the limits indicated by the applicable curve. O The data of Figure 26 is based upon Tj(pk)=150 C; Tc or Ta is variable depending upon conditions. Pulse curves are O valid for duty cycles to 10% prodided Tj(pk) < 150 C. Tj(pk) may be calculated from the data in Figure 25. At high case or ambient temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by the secondary break-down. -5.0 BONDING WIRE LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT -2.0 -5.0 -1.0 -10 -30 -45 -65 -100 V CE , COLLECTOR-EMITTER VOLTAGE(V) Figure 8. Active Region Safe Operating Area April 3,2013-REV.04 PAGE . 4 BC847BS-AU MOUNTING PAD LAYOUT 0.075 (1.90) 0.020 (0.50) 0.018 (0.45) 0.026 (0.65) 0.026 (0.65) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel April 3,2013-REV.04 PAGE . 5 BC847BS-AU Part No_packing code_Version BC847BS-AU_R1_000A1 BC847BS-AU_R2_000A1 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 3,2013-REV.04 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 6 BC847BS-AU Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 3,2013-REV.04 PAGE . 7