SPECIFICATION Samsung P/N : CL10F474ZB8NNNC Descriptiont : CAP, 470㎋, -20/+80%, 50V,Y5V,0603 Supplier : Samsung electro-mechanics Product : Multi-layer Ceramic Capacitor A. Samsung Part Number CL 10 F 474 Z B 8 N N N C ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ① Series ② Size Samsung Multi-layer Ceramic Capacitor 0603 (inch code) L: 1.6 ± 0.1 ③ Dielectric ④ Capacitance ⑤ Capacitance tolerance ⑥ Rated Voltage ⑦ Thickness Y5V 470 ㎋ -20/+80 % 50 V 0.8 ± 0.1 mm ⑧ Inner electrode Termination Plating ⑨ Product ⑩ Special ⑪ Packaging mm W: 0.8 ± 0.1 mm Ni Cu Sn 100% (Pb Free) Normal Reserved for future use Cardboard Type, 7"reel(4,000ea) B. Samsung Reliability Test and Judgement condition Performance Capacitance Tan δ (DF) Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability Test condition Within specified tolerance 0.07 max. 1㎑±10% 1.0±0.2Vrms More than 100Mohm㎌ Rated Voltage 60~120 sec. No abnormal exterior appearance No dielectric breakdown or mechanical breakdown Y5V Visual inspection 250% of the rated voltage (From -30℃ to 85℃, Capacitance change should be within -82~+22%) No peeling shall be occur on the 500gF, for 10±1 sec. terminal electrode Capacitance change : within ±30% Bending to the limit (1mm) with 1.0mm/sec. More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Soldering heat Capacitance change : Tan δ, IR : initial spec. within ±20% Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Capacitance change : Tan δ, IR : initial spec. within ±20% Moisture Resistance Capacitance change : within ±30% Tan δ : 0.09 max IR : More than 25㏁·㎌ High Temperature Resistance Capacitance change : within ±30% Tan δ : 0.09 max IR : More than 50㏁·㎌ Temperature Cycling Capacitance change : Tan δ, IR : initial spec. within ±20% Test condition Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours 3 direction (x, y, z) With rated voltage 40±2℃, 90~95%RH, 500 +12/-0 hour With 200% of the rated voltage Max. operating temperature 1000+48/-0 hour 1 cycle condition Min. operating temperature → → Max. operating temperature → 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue. 25℃ 25℃