D55V0M1B2WS NEW PRODUCT 55V BIDIRECTIONAL TVS DIODE Features Mechanical Data Provides ESD Protection per IEC 61000-4-2 Standard: Air ±30kV, Contact ±25kV 1 Channel of ESD Protection Ideal for 60V MOSFET Protection High Peak Pulse Current per IEC 61000-4-5 Standard Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Case: SOD323 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish annealed over Alloy 42 leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Weight: 0.004 grams (approximate) SOD323 Pin 1 Pin 2 Device Schematic Bottom View Ordering Information (Note 4) D 55V0 M X B X XXX- XX Voltage Capacitance 5V0: 5.0 Volts X: Extremely Low (<0.5pF) 55V0: 55.0 Volts F: Ultra Low (0.5 ~ 1.0pF) P: Very Low (1.1 ~ 10pF) L: Low (10.1 ~ 20pF) M: Medium (>20pF) Product D55V0M1B2WS-7 Notes: # of Channels Polarity # of Pins Package 1: 1 Channel 2: 2 Channels 4: 4 Channels 6: 6 Channels B: Bidirectional (Symmetrical) U: Unidirectional A: Bidirectional (Asymmetrical) 2: 2 Pins 3: 3 Pins 5: 5 Pins 6: 6 Pins 8: 8 Pins 10: 10 Pins LP3: X3-DFN0603-2 LP: X1-DFN1006-2 LP4: X2-DFN1006-2 WS: SOD323 T: SOD523/SOT523 SO: SOT23/SOT25 W: SOD123/SOT323 TS: TSOT25/TSOT26 S: SOT353/SOT363 V:SOT553/SOT563 Compliance Standard Marking I/I Reel size(inches) 7 Tape width(mm) 8 Packing 7: 7” reel 7B: 7” reel (DFN1006 Package Only) 13: 13” reel Quantity per reel 3,000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information I/I D55V0M1B2WS Document number: DS36160 Rev. 3 - 2 I/I = Product Type Marking Code 1 of 4 www.diodes.com June 2013 © Diodes Incorporated D55V0M1B2WS Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol PPP IPP VESD_Contact VESD_Air ESD Protection – Air Discharge Value 200 2 ±25 Unit W A kV Conditions 8/20µs, Per Figure 2 8/20µs, Per Figure 2 IEC 61000-4-2 Standard ±30 kV IEC 61000-4-2 Standard Thermal Characteristics Characteristic Package Power Dissipation (Note 5) Thermal Resistance, Junction to Ambient (Note 5) Operating and Storage Temperature Range Symbol PD RθJA TJ, TSTG Value 250 500 -65 to +150 Unit mW C/W C Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Reverse Standoff Voltage Channel Leakage Current (Note 6) Symbol VRWM IRM Clamping Voltage VCL Breakdown Voltage Channel Input Capacitance VBR CT Notes: Min — — — — 57 — Typ — — — — — 14 Max 55 100 86 100 — 25 Unit V nA V V pF Test Conditions VRWM = 55V IPP = 1A, tp = 8/20μS IPP = 2A, tp = 8/20μS IR = 1mA VR = 0V, f = 1MHz 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at http://www.diodes.com. 6. Short duration pulse test used to minimize self-heating effect. 250 Note 5 200 IPP, PEAK PULSE CURRENT (%Ipp) PD , POWER DISSIPATION (mW) NEW PRODUCT Characteristic Peak Pulse Power Dissipation Peak Pulse Current ESD Protection – Contact Discharge 150 100 50 0 0 80 120 160 40 TA, AMBIENT TEMPERATURE (° C) Figure 1 Power Derating Curve D55V0M1B2WS Document number: DS36160 Rev. 3 - 2 100 50 0 200 2 of 4 www.diodes.com 0 20 40 t, TIME (s) Figure 2 Pulse Waveform 60 June 2013 © Diodes Incorporated D55V0M1B2WS 100 15 f = 1MHz CT, TOTAL CAPACITANCE (pF) PEAK PULSE DERATING % OF PEAK POWER OR CURRENT 13 75 12 11 10 50 25 9 8 7 6 5 0 0 4 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (°C) Figure 3 Power Dissipation vs. Ambient Temperature 0 15 20 25 30 35 40 10 VR, DC REVERSE VOLTAGE (V) Figure 4 Total Capacitance vs. Reverse Voltage 5 10 TA = 150°C IR, LEAKAGE CURRENT (nA) NEW PRODUCT 14 T A = 125°C TA = 25°C TA = 85°C TA = 55°C 1 0 10 20 30 40 50 VR, REVERSE VOLTAGE(V) Figure 5 Typical Reverse Characteristics 55 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. C H A B K M J SOD323 Dim Min Max A 0.25 0.35 B 1.20 1.40 C 2.30 2.70 H 1.60 1.80 J 0.00 0.10 K 1.0 1.1 L 0.20 0.40 M 0.10 0.15 0° 8° All Dimensions in mm L D55V0M1B2WS Document number: DS36160 Rev. 3 - 2 3 of 4 www.diodes.com June 2013 © Diodes Incorporated D55V0M1B2WS Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. NEW PRODUCT X1 Y Dimensions Value (in mm) G 1.520 X 0.590 X1 2.700 Y 0.450 X G IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com D55V0M1B2WS Document number: DS36160 Rev. 3 - 2 4 of 4 www.diodes.com June 2013 © Diodes Incorporated