WSR www.vishay.com Vishay Dale Power Metal Strip® Resistors, Low Value (down to 0.001 ), Surface Mount FEATURES • Molded high temperature encapsulation • Ideal for all types of current sensing, voltage division and pulse applications including switching and linear power supplies, instruments, power amplifiers • Proprietary processing technique produces extremely low resistance values (down to 0.001 ) • All welded construction • Solid metal nickel-chrome or manganesecopper alloy resistive element with low TCR (< 20 ppm/°C) • Solderable terminations • Very low inductance 0.5 nH to 5 nH • Excellent frequency response to 50 MHz • Low thermal EMF (< 3 μV/°C) • AEC-Q200 qualified (1) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Notes * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. (1) Flame retardance test may not be applicable to some resistor technologies. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL SIZE WSR2 WSR3 4527 4527 RESISTANCE VALUE RANGE Tol. ± 0.5 % Tol. ± 1.0 % 0.005 to 1.0 0.001 to 1.0 0.005 to 0.2 0.001 to 0.2 POWER RATING P70 °C W 2.0 3.0 (2) WEIGHT (typical) g/1000 pieces 440 440 Notes • Part marking: DALE, model, value, tolerance, date code. (2) The WSR3 requires a minimum of 1050 sq. mil. circuit traces connecting to the recommended solder pad. TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature coefficient ppm/°C Element TCR Dielectric withstanding voltage Insulation resistance Operating temperature range Maximum working voltage ppm/°C VAC °C V WSR2 AND WSR3 RESISTOR CHARACTERISTICS ± 75 for 0.010 to 1.0 ; ± 110 for 0.005 to 0.0099 ; ± 300 for 0.004 to 0.0049 ± 450 for 0.003 to 0.0039 ; ± 600 for 0.002 to 0.0029 ; ± 750 for 0.001 to 0.0019 < 20 > 500 > 109 - 65 to + 275 (P x R)1/2 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: WSR25L000FEA W S R 2 5 L 0 0 0 F E A GLOBAL MODEL VALUE TOLERANCE CODE PACKAGING CODE SPECIAL WSR2 WSR3 L = m* R = Decimal 5L000 = 0.005 R0100 = 0.01 * Use “L” for resistance values < 0.01 D = ± 0.5 % F = ± 1.0 % J = ± 5.0 % EA = Lead (Pb)-free, tape/reel EK = Lead (Pb)-free, bulk (Dash number) (Up to 2 digits) From 1 to 99 as applicable TA = Tin/lead, tape/reel (R86) BA = Tin/lead, bulk (B43) Historical Part Numbering example: WSR2 0.005 1 % EA WSR2 0.005 1% EA HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE Revision: 17-Jan-13 Document Number: 30101 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 WSR www.vishay.com Vishay Dale DIMENSIONS DIMENSIONS in inches (millimeters) MODEL L H W WSR2 WSR3 W1 H T W W1 0.455 ± 0.032 0.095 ± 0.005 0.100 ± 0.010 0.275 ± 0.005 0.215 ± 0.005 (11.56 ± 0.813) (2.41 ± 0.127) (2.54 ± 0.254) (6.98 ± 0.127) (5.46 ± 0.127) T L I SOLDER PAD DIMENSIONS in inches (millimeters) MODEL b WSR2 WSR3 a a b l 0.155 (3.94) 0.230 (5.84) 0.205 (5.21) Rated Power in % DERATING 120 100 80 60 40 20 0 - 65 - 25 25 75 125 70 175 225 275 Ambient Temperature °C PERFORMANCE TEST TEST LIMITS CONDITIONS OF TEST WSR2 WSR3 Thermal shock - 55 °C to + 150 °C, 1000 cycles, 15 min at each extreme ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R Short time overload WSR2: 5 x rated power for 5 s WSR3: 4 x rated power for 5 s ± (0.5 % + 0.0005 ) R ± (2.0 % + 0.0005 ) R Low temperature storage - 65 °C for 24 h ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R High temperature exposure 1000 h at + 275 °C ± (1.0 % + 0.0005 ) R ± (1.0 % + 0.0005 ) R Bias humidity + 85 °C, 85 % RH, 10 % bias, 1000 h ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R Mechanical shock 100 g’s for 6 ms, 5 pulses ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R Vibration Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R Load life 1000 h at rated power, + 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.0005 ) R ± (2.0 % + 0.0005 ) R Resistance to solder heat + 260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R PACKAGING MODEL WSR2 and WSR3 REEL TAPE WIDTH DIAMETER PIECES/REEL CODE 24 mm/embossed plastic 330 mm/13" 1500 EA Note • Embossed Carrier Tape per EIA-481. Revision: 17-Jan-13 Document Number: 30101 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000