Rohm BD3871FS Sound processor for cd radio cassette player Datasheet

00W073A
Sound processor for CD radio cassette player
BD3871FS
Description
BD3871FS is a sound processor for CD/MD radio
cassette player. This IC provides all functions,
such as input selector (3 input sources), an input
gain amplifier (25dB, 27dB, 29dB),and a surround,
tone (bass, treble). This IC can be controlled
by a 2-wire serial data interface.
Dimension (Units : mm)
10.0±0.2
1) Can select center frequency and Q value of Bass
characteristics by external components.
2) Mute switch at the input terminal can reduce cross talk.
3) Surround function is composed without external components.
4) Ideal for energy-saving designs with low current consumption
due to the adoption of the BiCMOS process, allowing easy-design
of the regulator blocks in the set.
0.8
0.15±0. 1
7.8±0.3
1.8±0. 1
0. 1 1
1
Features
13
5.4±0.2
24
12
0.36±0. 1
0.3Min
0. 15
SSOP-A24
Applications
CD radio cassette player, MD radio cassette player, Micro component stereo
Absolute Maximum Ratings (Ta=25˚C)
Parameter
Symbol
Limits
Vcc
10
Power supply voltage
Pd
Power dissipation
800
Unit
V
*
mW
Operating temperature range
Topr
–25
~
+75
Storage temperature range
Tstg
–55
~
+125
˚C
˚C
* Derating : 8.0mW/˚C for operation above Ta=25˚C
Recommended Operating Conditions (Ta=25˚C)
Parameter
Operating voltage
Symbol
Min.
Typ.
Max.
Unit
VDD
4.5
8
9.5
V
September, 2000
Electrical characteristics
(Unless otherwise noted ; Ta=25˚C, Vcc=8V, f=1kHz, Vi=50mVrms, RL=10kΩ , Rg=600Ω ,
INPUT GAIN=24dB, Vol=0dB, bass,treble=0dB, surround=OFF)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Circuit current
IQ
—
8
21
mA
Output voltage gain
GV
22
24
26
dB
Total harmonic distortion
THD
—
0.01
0.1
%
Maximum output voltage
Vomax
1.6
2.1
—
Vrms
Vno
—
4.5
15
µVrms
Rg=0Ω , Vol=–•, Bw=IHF–A
Rg=0Ω , Vol=0dB, Bw=IHF–A
Residual noise voltage
Conditions
No signal
VOUT=1Vrms, Bw=400~30kHz
THD=1%, Bw=400~30kHz
Vmno
—
40
80
µVrms
VRI
–90
–87
–84
dB
VIN=1Vrms, 1dB/STEP
Bass control range
GB
+16
–12
+14
–10
VIN=100mVrms, 2dB/STEP
TB
+14
–14
+12
–12
dB
Treble control range
+12
–16
+10
–14
dB
VIN=100mVrms, 2dB/STEP
Vsur
8
10
12
dB
VIN=100mVrms
Output residual noise voltage
Volume control range
Surround gain (Antiphase)
Application Circuit
OUT1 OUT2
0.33 µ
0.0022 µ
0.0022 µ
0.1µ
5.6K
0.1µ
Surround
23
22
Treble1
fc=8kHz
Treble2
fc=8kHz
21
20
19
10µ
+
390K
390K
24
5.6K
0.1µ
0.1µ
18
DATA CLOCK
LATCH
Vcc
10µ
+
17
16
15
14
13
Logic
Bass 2
Bass 1
f 0 =80Hz
f 0 =80Hz
Vcc/2
Vcc/2
0dB
~
–87dB
–•
Vcc/2
Vcc/2
Vcc/2
BD3871FS
50k
1
2
3
+
10µ
4
5
50k
6
50k
7
50k
50k
8
9
50k
10
11
+
+
+
+
+
+
+
10µ
10µ
10µ
10µ
10 µ
10µ
47µ
4.7K
4.7K
+
10µ
A1
A2
B1
B2
C1
C2
12
UNIT
RESISTANCE : Ω
CAPACITOR : F
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0
Similar pages