Anpec APL108725EC-TBG 800ma low dropout fast response positive adjustable regulator and fixed Datasheet

APL1087
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed
1.8V, 2.5V, and 3.3V
Features
•
•
•
•
•
•
•
•
•
•
General Description
Guaranteed Output Voltage Accuracy within 2%
The APL1087 is a low dropout three-terminal adjustable
regulators with 0.8A output current capability. In order to
Fast Transient Response
obtain lower dropout voltage and faster transient
response, which is critical for low voltage applications,
Guaranteed Dropout Voltage at Multiple Currents
Load Regulation : 0.6% Typ.
the APL1087 has been optimized.
The device is available in an adjustable version and fixed
Line Regulation : 0.03% Typ.
output voltages of 1.8V, 2.5V, and 3.3V, the output available voltage range is from 1.25 to 7.15V with an input
Low Dropout Voltage : 1.3V Typ. at IOUT =500mA
Current-Limit : 0.8A Min. at TJ=125°C
supply below 9V. Dropout voltage is guaranteed at a maximum of 1.45V at 0.5A.
On-Chip Thermal Limiting : 150 °C Typ.
Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal
Adjustable Output : 1.25~7.15V
Standard 3-Pin SOT-89, SOT-223, TO-92, and
limiting provides protection against any combination of
overload tha t would create excessi ve junc tion
TO- 252 Power Packages.
•
temperatures.
The APL1087 is available in the industry standard 3-pin
Lead Free and Green Devices Available
(RoHS Compliant)
SOT-89, SOT-223, TO-92, and TO-252 power packages.
Applications
Simplified Application Circuits
•
•
•
•
•
•
•
1.25V to 7.15V Adjustable Regulator
APL1087
VIN
IN
OUT
ADJ
VOUT
R1
121Ω
+
+
10µF
C1*
R2
100µF
C*2
Voltage Regulator for CD-ROM Drivers
Voltage Regulator for LAN Cards
Voltage Regulator for Mother Boards
Wireless Communication Systems
Portable Instrument
Portable Consumer Equipment
Low Voltage Systems
* Needed if device is far from filter capacitors
VOUT = 1.250V×
R1+ R2
Improving Ripple Rejection
R1
5V Regulator with Shutdown
VIN
APL1087
IN
OUT
ADJ
VIN
+
TTL
10µF
1k
1k
10µF
5V
121Ω
1%
+
+
APL1087
IN
OUT
ADJ
VOUT
R1
150µF
R2
+
C*
10µF
3
100µF
365Ω
1%
* C3 improves ripple rejection.
XC should be approximately
equal to R1 at ripple frequency
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
1
www.anpec.com.tw
APL1087
Ordering and Marking Information
Package Code
D : SOT-89
E : TO-92
U : TO-252
V : SOT-223
Operating Ambient Temperature Range
C : 0 to 70 oC
Handling Code
TB : Tape & Box
TR : Tape & Reel
Voltage Code
18 : 1.8V
25 : 2.5V
33 : 3.3V
Blank : Adjustable Version
Assembly Material
G : Halogen and Lead Free Device
APL1087
Assembly Material
Handling Code
Temperature Range
Package Code
Voltage Code
APL1087 U:
APL1087
XXXXX
XXXXX - Date Code
APL1087 D/V/E :
APL1087
XXXXX
XXXXX - Date Code
APL1087-18U:
18
APL1087
XXXXX
XXXXX - Date Code
APL1087-18D/V/E :
APL1087
XXXXX18
XXXXX - Date Code
APL1087-25U:
25
APL1087
XXXXX
XXXXX - Date Code
APL1087-25D/V/E :
APL1087
XXXXX25
XXXXX - Date Code
APL1087-33U:
33
APL1087
XXXXX
XXXXX - Date Code
APL1087-33D/V/E :
APL1087
XXXXX33
XXXXX - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Pin Configurations
VOUT
VOUT
APL1087
1
ADJ/GND
2
3
VOUT
1
V IN
2
ADJ/GND
SOT-89 (Front View)
3
VOUT
V IN
SOT-223 (Front View)
V OUT
3
V IN
2
V OUT
1
ADJ/GND
1
2
ADJ/GND OUT
TO-92 (Top View)
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
3
IN
TO-252 (Top View)
2
www.anpec.com.tw
APL1087
Absolute Maximum Ratings
Symbol
VI
TSTG
TL
Parameter
Rating
Unit
9
V
-65 ~ +150
°C
260
°C
Typical Value
Unit
0 to 125
0 to 150
°C
Input Voltage
Storage Temperature Range
Maximum Lead Soldering Temperature, 10 Seconds
Thermal Characteristics
Symbol
Parameter
Operating Junction Temperature Range
TJ
Control Section
Power Transistor
Thermal Resistance from Junction to Ambient in Free Air
θJA
SOT-89
SOT-223
TO-92
TO-252
180
75
180
62.5
SOT-89
SOT-223
TO-92
TO-252
38
15
80
6
°C/W
Thermal Resistance from Junction to Ambient in Free Air
θJC
°C/W
Electrical Characteristics
Symbol
VREF
VOUT
REGLINE
REGLOAD
VD
Parameter
Reference Voltage
Test Conditions
10mA≤ IOUT ≤0.5A, 3.1V≤VIN≤9V, TJ =0~125°C
Output Voltage
APL1087-18 TJ =0~125°C, 0≤ IOUT≤ 0.5A, 3.25V≤VIN≤9V,
APL1087-25 TJ =0~125°C, 0≤ IOUT≤ 0.5A, 3.95V≤VIN≤9V,
APL1087-33 TJ =0~125°C, 0≤ IOUT≤ 0.5A, 4.75V≤VIN≤9V,
TJ =0~125°C
Line Regulation
(Note1)
APL1087 IOUT=10mA, 3.1V≤VIN ≤9V
APL1087-18 IOUT=0mA, 3.25V≤VIN≤9V (Note1)
APL1087-25 IOUT=0A, 3.95V≤VIN≤9V (Note1)
APL1087-33 IOUT=0A, 4.75V≤VIN ≤ 9V (Note1)
TJ =0~125°C
Load Regulation
(Note1)
APL1087 (VIN –VOUT)=3V, 0≤ IOUT ≤0.5A
(Note1)
APL1087-18 VIN=3.25V, 0≤ IOUT ≤0.5A
)
APL1087-25 VIN=3.95V, 0≤ IOUT ≤0.5A (Note1)
APL1087-33 VIN=4.75V, 0≤ IOUT ≤0.5A (Note1)
Dropout Voltage
IOUT=0.5A ,TJ =0~125°C (Note 2)
Min.
APL1087
Typ.
Max.
1.225
1.250
1.275
1.764
2.450
3.235
1.800
2.500
3.300
1.836
2.550
3.365
0.03
1
1
1
0.2
6
6
6
0.4
0.6
-
-
Unit
V
V
%
mV
%
-
1.3
1.45
V
800
-
-
mA
ILIMIT
Current Limit
(VIN -VOUT)=5V, TJ=25°C
IADJ
Adjust Pin Current
(VIN -VOUT)=3V, IOUT=10mA, TJ=0~125°C
-
60
120
µA
∆IADJ
Adjust Pin Current
Change
TJ=0~125°C, 10mA≤ IOUT ≤0.5A, 1.45V≤VIN -VOUT≤7.55V
-
0.2
5
µA
-
1.7
-
mA
IO
Minimum Load Current TJ=0~125°C, VIN =9V
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
(Note 3)
3
www.anpec.com.tw
APL1087
Electrical Characteristics (Cont.)
Symbol
Parameter
Test Conditions
Ripple Rejection
FRIPPLE=120Hz, VRIPPLE=1VP-P,
(VIN -VOUT)=3V, TJ=0~125°C
TR
Thermal Regulation
TJ=25°C, 30ms Pulse
TS
Temperature Stability
LS
Long -Term Stability
VN
RMS Output Noise
OT
Over Temperature Point
PSRR
Quiescent Current
APL1087-18
APL1087-25
APL1087-33
Min.
APL1087
Typ.
Max.
Unit
60
75
-
dB
-
0.01
0.02
%/ W
-
0.5
-
%
TJ =125°C,1000Hrs.
-
0.3
-
%
TJ=25°C,10Hz≤F≤10kHz, (% of VOUT)
-
0.003
-
%
-
150
-
°C
5.5
5.5
5.5
10
10
10
TJ=0~125°C,
VIN≤9V
VIN≤9V
VIN≤9V
-
mA
Note : 1 : See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are measured at a constant junction temperature by low duty cycle pulse testing.
2 : Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/
output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage
curve.
3 : Minimum load current is defined as the minimum output current required to maintain regulation.
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
4
www.anpec.com.tw
APL1087
Typical Operating Characteristics
Load Transient Response
7
5
3
40
6
0
2.5
-5
2
-10
1.5
-15
1
-20
0.5
IOUT
-25
0
-30
-0.5
30
5
VIN
20
4
10
3
0
2
VOUT=3.3V
-10
0
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
Time (µs)
2
Time (µs)
Adjust Pin Current vs. Temperature
Current Limit vs. Temperature
62
940
61
920
Current Limit (mA)
Adjust Pin Current (µA)
1
-20
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Input Voltage (V)
50
Output Voltage Deviation (mV)
3.5
VOUT=1.25V
Output Current (A)
Output Voltage Deviation (mV)
10
Line Transient Response
60
59
58
57
900
880
860
840
VIN=5V
820
800
56
55
780
-50
0
50
100
760
-50
150
Temperature (°C)
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
0
50
100
150
Temperature(°C)
5
www.anpec.com.tw
APL1087
Typical Operating Characteristics (Cont.)
Reference Voltage vs. Temperature
Dropout Voltage vs. Temperature
1.5
1.255
1.45
1.25
1.35
Reference Voltage (V)
Drpout Voltage (V)
1.4
IOUT=500mA
1.3
1.25
1.2
1.15
1.1
1.245
1.24
1.235
1.23
1.225
1.05
1
-50 -25
0
25
50
75
1.22
-50 -25
100 125 150
0
25
50
75 100 125 150
Temperature (°C)
Temperature (°C)
Output Voltage vs. Temperature
Output Voltage vs. Temperature
3.4
2.6
2.5
3.3
2.3
Output Voltage (V)
Output Voltage (V)
2.4
2.2
2.1
2
1.9
1.8
3.2
3.1
1.7
1.6
-50 -25
0
25
50
75
3
100 125
Temperature (°C)
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
-50
-25
0
25
50
75
100
125
Temperature (°C)
6
www.anpec.com.tw
APL1087
Typical Operating Characteristics (Cont.)
Output Voltage vs. Input Voltage
Current Limit vs. Input Voltage
3.5
940
930
920
2.5
Current Limit (mA)
Output Voltage (V)
3
2
1.5
1
910
900
890
880
870
860
850
0.5
840
0
0
1
2
3
4
5
6
7
8
830
9
4
Load Regulation vs. Output Current
8
9
1.8
VOUT=1.25V
1.6
Dropout Voltage (V)
Load Regulation(mV)
7
Dropout Voltage vs. Output Current
8
6
5
4
VIN=5V
3
2
1.4
1.2
1
0.8
0.6
1
0
6
Input Voltage (V)
Input Voltage (V)
7
5
100 200
300
400
500
600
700
0.4
800
Output Current (mA)
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
0
200
400
600
800
Output Current (mA)
7
www.anpec.com.tw
APL1087
Package Information
SOT-89
A
C
L
H
E
E1
D
D1
e
e1
B
B1
SOT-89
S
Y
M
B
O
L
A
MIN.
MAX.
MIN.
MAX.
1.40
1.60
0.055
0.063
MILLIMETERS
INCHES
B
0.44
0.56
0.017
0.022
B1
0.36
0.48
0.014
0.019
C
0.35
0.44
0.014
0.017
D
4.40
4.60
0.173
0.181
D1
1.62
1.83
0.064
0.072
E
2.29
2.60
0.090
0.102
E1
2.13
2.29
0.084
0.090
e
1.50 BSC
e1
3.00 BSC
0.059 BSC
0.118 BSC
H
3.94
4.25
0.155
0.167
L
0.89
1.20
0.035
0.047
Note : Follow from JEDEC TO-243 AA.
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
8
www.anpec.com.tw
APL1087
Package Information
SOT-223
D
b2
E
E1
SEE
VIEW A
e
c
0.25°
L
b
0
A
A1
A2
e1
GAUGE PLANE
SEATING PLANE
VIEW A
S
Y
M
B
O
L
SOT-223
MILLIMETERS
MIN.
INCHES
MAX.
A
MIN.
MAX.
1.80
0.071
A1
0.02
0.10
0.001
0.004
A2
1.50
1.70
0.059
0.067
b
0.66
0.84
0.026
0.033
b2
2.90
3.10
0.114
0.122
c
0.23
0.33
0.009
0.013
0.264
0.287
D
6.30
6.70
0.248
E
6.70
7.30
0.264
E1
3.30
3.70
0.130
e
2.30 BSC
e1
L
0
4.60 BSC
0.181 BSC
0.030
0.75
0°
0.146
0.091 BSC
0°
10 °
10 °
Note : 1. Follow from JEDEC TO-261 AA.
2. Dimension D and E1 are determined at the outermost extremes
of the plastic exclusive of mold flash, tie bar burrs, gate burrs,
and interlead flash, but including any mismatch between the top
and bottom of the plastic body.
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
9
www.anpec.com.tw
APL1087
Package Information
A
TO-92
E
S
D
L
j
e1
b
e
TO-92
S
Y
M
B
O
L
MIN.
MAX.
MIN.
MAX.
A
4.32
5.33
0.170
0.210
b
0.41
0.53
0.016
0.021
D
4.45
5.20
0.175
0.205
E
3.18
4.19
0.125
0.165
e
2.42
2.66
0.095
0.105
e1
1.15
1.39
0.045
0.055
j
3.43
4.00
0.135
0.157
L
12.70
15.00
0.500
0.591
S
2.03
2.66
0.080
0.105
MILLIMETERS
INCHES
Note : Follow from JEDEC TO-92.
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
10
www.anpec.com.tw
APL1087
Package Information
TO-252
E
A
E1
c2
L4
H
D
D1
L3
b3
c
b
e
SEE VIEW A
0
GAUGE PLANE
SEATING PLANE
0.25
A1
L
VIEW A
TO-252
S
Y
M
B
O
L
MIN.
MAX.
MIN.
MAX.
A
2.18
2.39
0.086
0.094
MILLIMETERS
INCHES
0.005
0.13
A1
b
0.50
0.89
0.020
0.035
b3
4.95
5.46
0.195
0.215
0.024
c
0.46
0.61
0.018
c2
0.46
0.89
0.018
0.035
0.245
D
5.33
6.22
0.210
D1
4.57
6.00
0.180
0.236
E
6.35
6.73
0.250
0.265
E1
3.81
6.00
0.150
0.236
9.40
10.41
0.370
0.410
L
0.90
1.78
0.035
0.070
L3
0.89
2.03
0.035
0.080
e
H
2.29 BSC
L4
0
0.090 BSC
0.040
1.02
0°
8°
0°
8°
Note : Follow from JEDEC TO-252 .
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
11
www.anpec.com.tw
APL1087
Carrier Tape & Reel Dimensions
P0
P2
P1
A
B0
W
F
E1
OD0
K0
A0
A
OD1 B
B
T
SECTION A-A
SECTION B-B
H
A
d
T1
Application
SOT-89
Application
SOT-223
Application
TO-252
A
H
T1
C
d
D
W
E1
F
178.0±
2.00
50 MIN.
12.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
12.0±0.30
1.75±0.10
5.50±0.05
P0
P1
P2
D0
D1
T
A0
B0
K0
4.50±
0.20
1.80±0.20
E1
F
2.0±0.05
1.5+0.10
-0.00
0.6+0.00
4.80±0.20
-0.40
4.0±0.10
8.0±0.10
A
H
T1
C
d
D
320.0±
2.00
50 MIN.
12.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
P0
P1
P2
D0
D1
1.5+0.10
-0.00
1.5 MIN.
T
W
12.00±0.30 1.75±0.10
A0
0.6+0.00
6.90±0.20
-0.40
5.50±0.05
B0
K0
7.50±
0.20
2.10±0.20
4.00±0.10
8.00±0.10
2.00±0.50
A
H
T1
C
d
D
W
E1
F
330.0±
2.00
50 MIN.
16.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
16.0±0.30
1.75±0.10
7.50±0.05
P0
P1
P2
D0
D1
T
A0
B0
K0
4.0±0.10
8.0±0.10
2.0±0.05
1.5+0.10
-0.00
1.5 MIN.
1.5 MIN.
0.6+0.00
6.80±0.20 10.40±0.20 2.50±0.20
-0.40
(mm)
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
12
www.anpec.com.tw
APL1087
Carrier Tape & Box Dimensions
Devices Per Unit
Package Type
Unit
Quantity
SOT-89
Tape & Reel
1000
TO-252
Tape & Reel
2500
SOT-223
Tape & Reel
2500
TO-92
Tape & Box
2000
Taping Direction Information
SOT-89
USER DIRECTION OF FEED
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
13
www.anpec.com.tw
APL1087
Taping Direction Information (Cont.)
SOT-223
USER DIRECTION OF FEED
TO-252
USER DIRECTION OF FEED
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
14
www.anpec.com.tw
APL1087
Reflow Condition
(IR/Convection or VPR Reflow)
tp
TP
Critical Zone
TL to TP
Ramp-up
Temperature
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25°C to Peak
Time
Reliability Test Program
Test item
SOLDERABILITY
HOLT
PCT
TST
ESD
Latch-Up
Method
MIL-STD-883D-2003
MIL-STD-883D-1005.7
JESD-22-B,A102
MIL-STD-883D-1011.9
MIL-STD-883D-3015.7
JESD 78
Description
245°C, 5 sec
1000 Hrs Bias @125°C
168 Hrs, 100%RH, 121°C
-65°C~150°C, 200 Cycles
VHBM > 2KV, VMM > 200V
10ms, 1tr > 100mA
Classification Reflow Profiles
Profile Feature
Average ramp-up rate
(TL to TP)
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (min to max) (ts)
Time maintained above:
- Temperature (TL)
- Time (tL)
Peak/Classification Temperature (Tp)
Time within 5°C of actual
Peak Temperature (tp)
Ramp-down Rate
Sn-Pb Eutectic Assembly
Pb-Free Assembly
3°C/second max.
3°C/second max.
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
183°C
60-150 seconds
217°C
60-150 seconds
See table 1
See table 2
10-30 seconds
20-40 seconds
6°C/second max.
6°C/second max.
6 minutes max.
Time 25°C to Peak Temperature
Notes: All temperatures refer to topside of the package. Measured on the body surface.
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
15
8 minutes max.
www.anpec.com.tw
APL1087
Classification Reflow Profiles (Cont.)
Table 1. SnPb Eutectic Process – Package Peak Reflow Temperatures
3
3
Package Thickness
Volume mm
Volume mm
<350
≥350
<2.5 mm
240 +0/-5°C
225 +0/-5°C
≥2.5 mm
225 +0/-5°C
225 +0/-5°C
Table 2. Pb-free Process – Package Classification Reflow Temperatures
3
3
3
Package Thickness
Volume mm
Volume mm
Volume mm
<350
350-2000
>2000
<1.6 mm
260 +0°C*
260 +0°C*
260 +0°C*
1.6 mm – 2.5 mm
260 +0°C*
250 +0°C*
245 +0°C*
≥2.5 mm
250 +0°C*
245 +0°C*
245 +0°C*
*Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated
classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL
level.
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan, R. O. C.
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Copyright  ANPEC Electronics Corp.
Rev. A.9 - Dec., 2008
16
www.anpec.com.tw
Similar pages