ANT • • • • • • • • Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability Up to four poles with seven functions available Anti-rotation feature on flat toggles High torque bushing prevents separation from frame during installation Wide variety of terminal options - E222871 SPECIFICATIONS Electrical Ratings Electrical Life Contact Resistance Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature 5A @ 120VAC, 28VDC; 2A @ 250VAC See Contact Options 50,000 cycles typical < 20 mΩ max initial @ 2-4VDC, 100mA 1500Vrms min > 100MΩ min -40°C to 85°C -40°C to 85°C MATERIALS ←RoHS COMPLIANT Actuator Housing Cover Bushing Bracket Contacts Terminals Brass, Chrome Plated DAP – Diallyl Phthalate Stainless Steel Brass, Nickel Plated Brass, Tin Plated Phosphor Bronze, Silver Plated Brass, Silver Plated www.citswitch.com page 115 phone – 763.535.2339 fax – 763.535.2194 ANT TOGGLE SWITCH ORDERING INFORMATION Series: B ANT 2 3 T M ANT Number of Poles: 1 = SPDT 2 = DPDT 3 = 3PDT 4 = 4PDT Switch Function: 1 = ON-NONE-ON 2 = ON-NONE-(ON) 3 = ON-OFF-ON 4 = (ON)-OFF-(ON) 5 = ON-OFF-(ON) 6 = ON-ON-ON ** See Three Way Wiring Section for Details Actuator: T = 5.08mm, Std S = 10.41mm, Std X = 13.97mm, Std V = 16.26mm, Std W = 21.34mm, Std Y = 6.35mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings F = 12.30mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings G = 21.00mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings K = 13.50mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings Z = 12.37mm, Large Toggle **only available with BZ/BZR bushings Z1 = 17.45mm, Large Toggle **only available with BZ/BZR bushings LK = 14.73mm, Locking Toggle, Round Top **only available with K/K1 bushings LK1 = 14.73mm, Locking Toggle, Flat Top **only available with K/K1 bushings P(color) = 21.34mm, Plastic **See color choices in Actuator Option section PX = 26.30mm, Plastic, Flat Toggle **only available with BZ/BZR bushings Bushing: E / E1 = 8.89mm, ¼-40NS / Non-Threaded, Keyway F / F1 = 7.10mm, ¼-40NS / Non-Threaded, Keyway J = 8.89mm, ¼-40NS, Flat W = 8.89mm, M6P-0.75 (Metric), Keyway H = 8.00mm, High Torque, ¼-40NS, Keyway G = 7.52mm, High Torque, ¼-40NS, Flat AR1 / AR2 = 7.55mm, Anti-Rotation, ¼-40NS / Non-Threaded, Keyway AN1 / AN2 = 7.55mm, Anti-Rotation, ¼-40NS / Non-Threaded, Flat BZ = 11.38mm, 15/32 -32NS, Keyway BZR = 11.38mm, 15/32 -32NS, Keyway, with support insert L = 7.55mm, ¼-40NS, Flat, Splash proof K / K1 = 8.00mm, ¼-40NS / Non-Threaded, Keyway **See Actuator Option section for bushing availability with various actuators Terminals: B = Solder Lug, C = PC Pin **Wire wrap terminals available in various lengths, contact factory D = Quick Connect H = Horizontal Mount, Right Angle PC Pin; HS = Snap-in V = Vertical Mount, Right Angle PC Pin; VS = Snap-in S20 or S25 = PC Pin with Support Bracket; V20 or V25= Snap-in Support Bracket S35 or S40 = PC Pin with Support Bracket; V35 or V40 = Snap-in Support Bracket Contacts: Q = Silver Plated R = Gold Plated G = Gold over Silver Plated Epoxy Seal: E = Epoxy Seal Actuator Cover: Actuator Cover Colors: Blank = No Cover 1 = White S = for S, T, X, V, & W actuators 2 = Black E = for E, F, J, & G bushings 3 = Red Z = for BZ & BZR bushings ** Color choices only available with S toggle cover Q E www.citswitch.com page 116 phone – 763.535.2339 fax – 763.535.2194 ANT SWITCH FUNCTION Toggle Position Function SPDT 1 2 ON ON NONE NONE ON (ON) 3 ON OFF ON 4 5 (ON) ON OFF OFF (ON) (ON) Terminals 2-3 --- 2-1 Toggle Position Function DPDT 1 2 3 4 5 ON ON ON (ON) ON NONE NONE OFF OFF OFF ON (ON) ON (ON) (ON) Terminals 2-3 5-6 --- 2-1 5-4 6 ON ON ON Terminals 2-3 5-6 2-3 5-4 2-1 5-4 Toggle Position Function 3PDT 1 2 3 4 5 ON ON ON (ON) ON NONE NONE OFF OFF OFF ON (ON) ON (ON) (ON) Terminals 2-3 5-6 8-9 --- 2-1 5-4 8-7 Toggle Position Function 1 2 3 4 5 4PDT Terminals 6 Terminals ON ON ON (ON) ON 2-3 5-6 8-9 11-12 ON 2-3 5-6 8-9 11-12 NONE NONE OFF OFF OFF --ON 2-3 5-4 8-9 11-10 ON (ON) ON (ON) (ON) 2-1 5-4 8-7 11-10 ON 2-1 5-4 8-7 11-10 www.citswitch.com page 117 phone – 763.535.2339 fax – 763.535.2194 ANT ACTUATOR OPTIONS ** Actuator lengths shown with E bushing, subtract 1.78mm for F/F1 bushing, subtract 0.51mm for M bushing T S X V W ** Only available with AR1/AR2 & AN1/AN2 bushings. Y F G K ** Only available with BZ & BZR bushings. Z Z1 PX PX actuator is plastic (Black) ** LK & LK1 only available with K & K1 bushings. LK & LK1 are not available with momentary functions ** P actuator is plastic P2 = Black, std P1 = White P3 = Red Contact factory for other color options LK LK1 P2 www.citswitch.com page 118 phone – 763.535.2339 fax – 763.535.2194 ANT BUSHING OPTIONS E (Threaded) E1 (NonThreaded) AR1 (Threaded) AR2 (Non-Threaded) Anti-Rotation F (Threaded) F1 (NonThreaded) J (Threaded) AN1 (Threaded) AN2 (Non-Threaded) Anti-Rotation H (Threaded) High Torque BZ (Threaded) ** If selecting F, G, or K actuator, one of these bushings must be selected G (Threaded) High Torque BZR (Threaded) Impact Resistant ** Only used with Z, Z1, & PX actuators W (Threaded) Metric K (Threaded) K1 (Non-Threaded) **Only used with LK & LK1 actuators PANEL MOUNTING 1/4”- 40 Bushings Metric Bushing 15/32” Bushings L (Threaded) Splash Proof ** Not available with Z, Z1, & PX actuators www.citswitch.com page 119 phone – 763.535.2339 fax – 763.535.2194 ANT TERMINAL OPTIONS B (Single Pole) B (Double Pole) B (3 Pole) B (4 Pole) C (Single Pole) C (Double Pole) C (3 Pole) C (4 Pole) D (Single Pole) D (Double Pole) D (3 Pole) D (4 Pole) H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Single Pole) H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Double Pole) www.citswitch.com page 120 phone – 763.535.2339 fax – 763.535.2194 ANT TERMINAL OPTIONS V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Single Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Double Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Three Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Four Pole) www.citswitch.com page 121 phone – 763.535.2339 fax – 763.535.2194 ANT TERMINAL OPTIONS Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Single Pole) Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Double Pole) Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Three Pole) www.citswitch.com page 122 phone – 763.535.2339 fax – 763.535.2194 ANT TERMINAL OPTIONS Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Four Pole) Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Single Pole) Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Double Pole) www.citswitch.com page 123 phone – 763.535.2339 fax – 763.535.2194 ANT TERMINAL OPTIONS Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Three Pole) Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Four Pole) CONTACT OPTIONS Designator Contact Material Q R G Silver Plating Gold over Nickel Plating Gold over Silver Plating Terminal Material Electrical Ratings Silver Plating Gold over Nickel Plating Gold over Silver Plating 5A @ 120VAC, 28VDC; 2A @ 250VAC .4 VA max @ 20VAC or VDC max .4 VA max @ 20VAC or VDC max or 5A @ 120VAC, 28VDC; 2A @ 250VAC CAP OPTIONS RUBBER TOGGLE COVER SEALED BOOT SEALED BOOT S_ E Z ** For use with S, T, X, V, & W actuators 1 = White, 2 = Black, 3 = Red ** For use with E, F, J, & G bushings only. Black color standard. ** For use with BZ & BZR bushings only. Black color standard. www.citswitch.com page 124 phone – 763.535.2339 fax – 763.535.2194 ANT THREE WAY WIRING DIAGRAM POSITION 1 POSITION 2 POSITION 3 POSITION 1 POSITION 2 POSITION 3 HARDWARE **Two hex nuts, one lock washer, & one locking ring supplied standard with threaded bushings Hex Nut Lock Washer Locking Ring Dress Nut Knurled Nut Knurled Nut Knurled Nut Knurled Nut **For use with E, F, M, AR1, L, & K bushings Hex Nut Lock Washer Locking Ring Dress Nut **For use with J, G, & AN1 bushings Hex Nut Lock Washer Locking Ring **For use with BZ & BZR bushings www.citswitch.com page 125 phone – 763.535.2339 fax – 763.535.2194