CTA16 Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 FEATURES: • H-Bridge contact configuration available • Small size and light weight • 25A switching capacity • F Class materials standard • QS-9000, ISO-9002 Certified Manufacturing 14.5 x 7.7 x 13.7 mm 14.5 x 14.0 x 14.3 mm CONTACT DATA Contact Arrangement Contact Rating Contact Resistance Contact Material Maximum Switching Power Maximum Switching Voltage Maximum Switching Current 1C = SPDT 1H = H-Bridge 25A @ 14VDC < 50 milliohms initial AgSnO2 480W 20VDC 30A COIL DATA Coil Voltage VDC Rated Max. 12 15.6 Coil Resistance Ω ± 10% .64W 225 .80W 180 Pick Up Voltage VDC (max) Release Voltage VDC (min) 75% of rated voltage 10% of rated voltage 8.4 1.2 Coil Power W Operate Time ms Release Time ms .64 & .80 10 5 CAUTION: 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 2. Pickup and release voltages are for test purposes only and are not to be used as design criteria. GENERAL DATA Electrical Life @ rated load Mechanical Life Insulation Resistance Dielectric Strength, Coil to Contact Contact to Contact Shock Resistance Vibration Resistance Terminal (Copper Alloy) Strength Operating Temperature Storage Temperature Solderability Weight 100K cycles, typical 10M cycles, typical 100MΩ min @ 500VDC 1500V rms min. @ sea level 1000V rms min. @ sea level 100m/s2 for 11ms 1.27mm double amplitude 10-40Hz 4N -40 °C to + 105 °C -40 °C to + 155 °C 230 °C ± 2 °C for 10 ± 0.5s 4.1g CTA16 Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 ORDERING INFORMATION 1. Series: CTA16 2.Contact Arrangement: 1C = SPDT 1H = H-bridge 3. Sealing Options: S = Sealed C = Dust Cover 4. Coil Voltage: 12VDC 5. Coil Power: .64 = .64W .80 = .80W CTA16 1C S 12VDC .64 DIMENSIONS (Units = mm) 1C SCHEMATICS & PC LAYOUTS (BOTTOM VIEWS) 1C 1H 1H