TDK ACH32C-220-T001 3-terminal filters for power line Datasheet

E M C
C o m p o n e n t s
June 2015
3-terminal Filters
For power line
ACH Series
ACH32C Type
ACH32C
[1206 inch]*
* Dimensions Code JIS[EIA]
(2/7)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150630 / 3tf_commercial_power_ach32c_en.fm
(3/7)
E M C
C o m p o n e n t s
3-terminal Filters
Product compatible with RoHS directive
Compatible with lead-free solders
For power line
Overview of ACH32C Type
FEATURES
T-type EMC filter that can be used for high-current circuits.
Achieve excellent attenuation characteristics by using it for circuits with stable grounds.
Does not require mounting space due to vertical mounting design, making it perfect for high-density circuits.
Guaranteed temperature range is –40 to +125°C, so it can be used under severe environmental conditions.
Use this product under reflow soldering conditions.
APPLICATION
HE devices (TVs, VTRs, CD players, electronic musical instruments, PCs, etc.)
OA equipment (Computers, terminals, facsimiles, etc.)
FA equipment (Robots, NC machine tools, process controllers, etc.)
AE equipment (Car navigation systems, etc.)
PART NUMBER CONSTRUCTION
ACH
Series name
32C
L×W×T Dimensions
(mm)
32C
3.2×1.6×2.1
-
100
-
Capacitance
(pF)
100
10
103
10000
T
001
Packaging style
Internal code
T
Taping
001
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Operating
Storage
Type
temperature
temperature
(°C)
(°C)
ACH32C
–40 to +125
–40 to +125
The Storage temperature range is for after the circuit board is mounted.
Package quantity
Individual weight
(pieces/reel)
2,000
(mg)
70
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150630 / 3tf_commercial_power_ach32c_en.fm
(4/7)
E M C
C o m p o n e n t s
ACH32C Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150630 / 3tf_commercial_power_ach32c_en.fm
(5/7)
E M C
C o m p o n e n t s
ACH32C Type
SHAPE & DIMENSIONS
2.1±0.2
1.6±0.2
3.2 ± 0.2
1
3
0.1
2
Dimensions in mm
RECOMMENDED LAND PATTERN
CIRCUIT DIAGRAM
4.2
0.6
1.0
3
1
GND
2
0.5
2.6
1.0
• No polarity
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150630 / 3tf_commercial_power_ach32c_en.fm
(6/7)
E M C
C o m p o n e n t s
ACH32C Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated voltage
Rated current
Insulation resistance
DC resistance
Guaranteed
insertion loss
Guaranteed
Part No.
frequency bandwidth
(V)max.
50
50
50
50
50
50
50
50
50
50
(A)max.
6
6
6
6
6
6
6
6
6
6
(M: )min.
100
100
100
100
100
100
100
100
100
100
(m: )max.
2
2
2
2
2
2
2
2
2
2
(dB)
–15
–15
–15
–20
–20
–25
–25
–25
–25
–25
(MHz)
2000 to 6000
1300 to 2500
650 to 2500
450 to 1300
200 to 800
100 to 350
55 to 300
30 to 200
10 to 300
3.5 to 200
○ Measurement equipment
Measurement item
Product No.
Insertion loss
E5071B
DC resistance
4338A
Insulation resistance
4339A
* Equivalent measurement equipment may be used.
ACH32C-100-T001
ACH32C-220-T001
ACH32C-470-T001
ACH32C-101-T001
ACH32C-331-T001
ACH32C-102-T001
ACH32C-222-T001
ACH32C-103-T001
ACH32C-333-T001
ACH32C-104-T001
Manufacturer
Agilent Technologies
Agilent Technologies
Agilent Technologies
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
10
Insertion loss (dB)
20
30
220
100
470
101
40
331
50
102
104
60
103
222
333
70
80
1
10
100
Frequency (MHz)
1000
10000
○ Measurement equipment
Product No.
Manufacturer
E5071B
Agilent Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150630 / 3tf_commercial_power_ach32c_en.fm
(7/7)
E M C
C o m p o n e n t s
ACH32C Type
PACKAGING STYLE
REEL DIMENSIONS
2.0±0.5
W1
9±0.3
W2
13+1.4
ø60min.
Type
ACH32C
1.0
W1
ø13±0.2
ø21±0.8
W2
ø180±2.0
Dimensions in mm
B
F
4.0±0.1
W
2.0±0.05
1.5 +0.1
0
1.75±0.1
TAPE DIMENSIONS
4.0±0.1
A
K
Dimensions in mm
Type
ACH32C
A
1.9±0.1
B
3.5±0.1
F
3.5±0.05
W
8.0±0.2
K
2.3±0.1
500 to 560min.
160min.
Drawing direction
Taping
440min.
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150630 / 3tf_commercial_power_ach32c_en.fm
Similar pages