YAGEO CC0402MRX5R4BB105 Surface mount multilayer ceramic capacitor Datasheet

DATA SHEET
SURFACE MOUNT MULTILAYER
CERAMIC CAPACITORS
General purpose & High capacitance
Class 2, X5R
4 V TO 50 V
100 pF to 100 µF
Product Specification – February 10, 2012 V.12
RoHS compliant & Halogen free
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
2
18
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP
This specification describes X5R
series chip capacitors with leadfree terminations.
All part numbers are identified by the series, size, tolerance, TC material,
packing style, voltage, process code, termination and capacitance value.
APPLICATIONS
PCs, Hard disk, Game PCs
Power supplies
DVD players
Mobile phones
Data processing
FEATURES
Supplied in tape on reel
Nickel-barrier end termination
RoHS compliant
Halogen free compliant
CTC & 12NC
YAGEO BRAND ordering code
GLOBAL PART NUMBER
CC
XXXX X X
(1)
X5R
(2) (3)
X
( PREFERRED )
BB
(4)
XXX
(5)
(1) SIZE – INCH BASED (METRIC)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
1812 (4532)
(2) TOLERANCE
K = ±10%
M = ±20%
(3) PACKING STYLE
R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
C = Bulk case
(4) RATED VOLTAGE
4=4V
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
(5) CAPACITANCE VALUE
2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 103 = 10 x 103 = 10,000 pF = 10 nF
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
3
18
PHYCOMP BRAND ordering codes
GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are
acceptable to order Phycomp brand products.
GLOBAL PART NUMBER
( PREFERRED )
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC
CODE
2 2 XX
XX
X
X
X
X
XX
Capacitance value(1)
Carrier type
50 = Blister (6.3 V)
55 = Paper/PE (≤6.3 V)
38 = Paper/PE (≥10 V)
22 = Blister (≥10 V)
54 = Bulk
Tolerance
6 = ±10%
7 = ±20%
Rated voltage - Termination
18 = 4 V
20 = 6.3 V
24 = 10 V
78 = 16 V
91 = 25 V
58 = 50 V
Temperature characteristic
3 = X5R
Packaging(2)
1 = reel: ∅180 mm; 7"
5 = reel: ∅330 mm; 13"
4 = bulk case
YNM0011
Size
8 = 0201
7 = 0402
6 = 0603
0 = 0805
1 = 1206
2 = 1210
4 = 1812
(1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR X5R”
(2) Quantity on reel depends on thickness classification; see table 5
PHYCOMP CTC
CODE ( FOR NORTH AMERICA )
 Example: 06032B225M5B20D
0603
2B
225
M
5
B
2
0
D
Size
code
Temp.
Char.
Capacitance
in pF
Tolerance
Voltage
Termination
Packing
Marking
Range identifier
0201
2B = X5R
0402
0603
0805
1206
1210
1812
101 = 100 pF; the
third digit signifies
the multiplying
factor:
0=×1
1 = × 10
2 = × 100
K = ±10%
4=4V
M = ±20%
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
B = NiSn
2 = 180 mm
7” Paper/PE
0 = no marking
D = Class 2 MLCC
3 = 330 mm
13” Paper/PE
B = 180 mm
7” Blister
3 = × 1,000
F = 330 mm
13” Blister
4 = × 10,000
P = Bulk case
5 = × 100,000
6 = × 1,000,000
7 = × 10,000,000
www.yageo.com
Feb 10, 2012 V.12
4
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
18
4 V to 50 V
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered
with a layer of plated tin (NiSn).
The terminations are lead-free. A
cross section of the structure is
shown in Fig.1.
terminations
electrodes
MLB457
ceramic material
Fig. 1 Surface mount multilayer ceramic capacitor construction
DIMENSION
Table 1 For outlines see fig. 2
TYPE
0201
0402
L1 (mm)
W (mm)
0.6 ±0.03 (1)
0.3 ±0.03 (1)
0.6 ±0.05 (2)
0.3 ±0.05 (2)
1.0 ±0.05 (1)
0.5 ±0.05 (1)
1.0 ±0.15 (2)
0.5 ±0.15 (2)
1.0 ±0.20 (3)
0.5 ±0.20 (3)
(1)
(1)
1.6 ±0.10
0603
1206
1210
1812
0.8 ±0.10
T (MM)
1.6 ±0.15 (2)
0.8 ±0.15 (2)
(3)
(3)
1.6 ±0.20
0805
OUTLINES
0.8 ±0.20
2.0 ±0.10 (1)
1.25 ±0.10 (1)
(2)
1.25 ±0.20 (2)
2.0 ±0.20
3.2 ±0.15 (1)
1.6 ±0.15 (1)
(2)
1.6 ±0.20 (2)
3.2 ±0.20 (1)
2.5 ±0.20 (1)
3.2 ±0.40 (2)
2.5 ±0.30 (2)
4.5 ±0.20 (1)
3.2 ±0.20 (1)
(2)
3.2 ±0.40 (2)
3.2 ±0.30
4.5 ±0.40
L2 / L3 (mm)
L4 (mm)
min.
max.
min.
0.10
0.20
0.20
For dimension see Table 1
W
T
0.20
0.30
0.40
L2
L4
L1
Refer to
table 2 to 4
0.20
0.60
0.40
0.25
0.75
0.55
0.25
0.75
1.40
0.25
0.75
1.40
0.25
0.75
2.20
L3
MBB211
Fig. 2 Surface mount multilayer
ceramic capacitor dimension
NOTE
1. Dimensions for size 0201, C < 1 µF; 0402, C < 4.7 µF; 0603, C < 10 µF;
0805 to 1812, C ≤ 100nF
2. Dimensions for size 0201, C ≥ 1 µF; 0402, C ≥ 4.7 µF; 0603, C ≥ 10 µF;
0805 to 1812, C > 100 nF
3. Dimensions for size 0402, C ≥ 10 µF; 0603, C ≥ 10 µF;
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
10 V
16 V
5
18
CAPACITANCE RANGE & THICKNESS FOR X5R
Table 2 Sizes from 0201 to 0402
CAP.
Last 2-digit of
12NC
0201
4V
0402
6.3 V
10 V
16 V
25 V
50 V
4V
6.3 V
100 pF
09
150 pF
12
220 pF
14
330 pF
16
470 pF
18
680 pF
21
1.0 nF
23
1.5 nF
25
2.2 nF
27
3.3 nF
29
4.7 nF
32
6.8 nF
34
10 nF
36
15 nF
39
22 nF
41
33 nF
43
47 nF
45
68 nF
47
100 nF
49
150 nF
52
220 nF
54
330 nF
56
470 nF
58
680 nF
61
1.0 µF
63
2.2 µF
67
4.7 µF
72
0.5±0.15 0.5±0.15
10 µF
76
0.5±0.20 0.5±0.20
25 V
0.3±0.03
0.3±0.03
0.3±0.03 0.3±0.03 0.3±0.03
0.5±0.05 0.5±0.05
0.3±0.03 0.3±0.03 0.3±0.03
0.5±0.05 0.5±0.05
0.3±0.03 0.3±0.03
0.5±0.05 0.5±0.05
0.3±0.05 0.3±0.05
0.5±0.05 0.5±0.05
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is available on request
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
6
18
CAPACITANCE RANGE & THICKNESS FOR X5R
Table 3 Sizes from 0603 to 0805
CAP.
Last 2-digit of
0603
12NC
6.3 V
10 V
0.8±0.1
0.8±0.1
10 nF
36
15 nF
38
22 nF
41
33 nF
43
47nF
45
68 nF
47
100 nF
49
150 nF
52
220 nF
54
330 nF
56
470 nF
58
680 nF
61
1.0 µF
63
2.2 µF
67
4.7 µF
72
10 µF
76
22 µF
81
0805
16 V
25 V
0.8±0.1
0.8±0.1
6.3 V
10 V
16 V
0.85±0.1
1.25±0.2
0.85±0.1
1.25±0.2
0.85±0.1
1.25±0.2
25 V
1.25±0.2
0.85±0.1
1.25±0.2
0.8±0.15
1.25±0.2
1.25±0.2
0.8±0.2
0.8±0.2
1.25±0.2
1.25±0.2
47 µF
85
100 µF
89
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is available on request
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
7
18
CAPACITANCE RANGE & THICKNESS FOR X5R
Table 4 Sizes from 1206 to 1812
CAP.
Last 2-digit of
1206
12NC
6.3 V
10 V
16 V
25 V
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
10 nF
36
15 nF
38
22 nF
41
33 nF
43
47nF
45
68 nF
47
100 nF
49
150 nF
52
220 nF
54
330 nF
56
470 nF
58
680 nF
61
1.0 µF
63
2.2 µF
67
4.7 µF
72
10 µF
76
22 µF
81
47 µF
85
100 µF
89
1210
1.6±0.2
1812
6.3 V
10 V
16 V
25 V
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
2.5±0.2
2.5±0.2
6.3 V
1.6±0.2
1.6±0.2
1.6±0.2
2.5±0.2
2.5±0.2
3.2±0.3
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is available on request
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
8
18
THICKNESS CLASSES AND PACKING QUANTITY
Table 5
SIZE
CODE
THICKNESS
CLASSIFICATION
TAPE WIDTH
QUANTITY PER REEL
0201
0.3 ±0.03 mm
0402
0603
0805
1206
Ø180 MM / 7 INCH
Ø330 MM / 13 INCH
Paper
Blister
Paper
Blister
QUANTITY
PER BULK CASE
8 mm
15,000
---
50,000
---
---
0.5 ±0.05 mm
8 mm
10,000
---
50,000
---
50,000
0.8 ±0.1 mm
8 mm
4,000
---
15,000
---
15,000
0.6 ±0.1 mm
8 mm
4,000
---
20,000
---
10,000
0.85 ±0.1 mm
8 mm
4,000
---
15,000
---
8,000
1.25 ±0.2 mm
8 mm
---
3,000
---
10,000
5,000
0.6 ±0.1 mm
8 mm
4,000
---
20,000
---
---
0.85 ±0.1 mm
8 mm
4,000
---
15,000
---
---
1.00 / 1.15 ±0.1 mm
8 mm
---
3,000
---
10,000
---
1.25 ±0.2 mm
8 mm
---
3,000
---
10,000
---
1.6 ±0.15 mm
8 mm
---
2,500
---
10,000
---
1.6 ±0.2 mm
8 mm
---
2,000
---
10,000
---
0.6 / 0.7 ±0.1 mm
8 mm
---
4,000
---
15,000
---
0.85 ±0.1 mm
8 mm
---
4,000
---
10,000
---
1.15 ±0.1 mm
8 mm
---
3,000
---
10,000
---
1.15 ±0.15 mm
8 mm
---
3,000
---
10,000
---
1.25 ±0.2 mm
8 mm
---
3,000
---
---
---
1210
1.5 ±0.1 mm
8 mm
---
2,000
---
---
---
1.6 / 1.9 ±0.2 mm
8 mm
---
2,000
---
---
---
2.0 ±0.2 mm
8 mm
---
2,000
1,000
---
---
---
2.5 ±0.2 mm
8 mm
---
1,000
500
---
---
---
1.15 ±0.15 mm
12 mm
---
3,000
---
---
---
1.25 ±0.2 mm
12 mm
---
3,000
---
---
---
1.35 ±0.15 mm
12 mm
---
2,000
---
---
---
1.5 ±0.1 mm
12 mm
---
2,000
---
---
---
1.6 ±0.2 mm
12 mm
---
2,000
---
---
---
2.0 ±0.2 mm
12 mm
---
2,000
---
---
---
0.6 / 0.85 ±0.1 mm
12 mm
---
2,000
---
---
---
1.15 ±0.1 mm
12 mm
---
1,000
---
---
---
1.25 ±0.2 mm
12 mm
---
1,000
---
---
---
1.5 ±0.1 mm
12 mm
---
1,000
---
---
---
1.6 ±0.2 mm
12 mm
---
1,000
---
---
---
2.0 ±0.2 mm
12 mm
---
1,000
---
---
---
2.5 ±0.2 mm
12 mm
---
500
---
---
---
1808
1812
www.yageo.com
Feb 10, 2012 V.12
9
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
18
ELECTRICAL CHARACTERISTICS
X5R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all tests and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
-
Table 6
VALUE
DESCRIPTION
Capacitance range
10 nF to 100 µF
Capacitance tolerance
±10% and ±20%
Dissipation factor (D.F.)
6.3 V
≤ 5%
Exception: 0402 ≥ 180 nF;
1210 ≥ 22 µF
≤ 7%
0201 ≥ 12 nF;
0402 ≥ 330 nF;
0603 ≥ 2.2 µF;
0805 ≥ 1 µF;
1206 ≥ 22 µF;
1210 ≥ 100 µF
10 V
≤ 10%
≤ 5%
Exception: 0402 ≥ 180 nF;
0805 ≥ 1 µF;
1206 ≥ 6.8 µF
≤ 7%
0201 ≥ 100 nF;
0402 ≥ 330 nF;
0603 ≥ 1 µF;
≤ 10%
0805 ≥ 2.2 µF;
1206 ≥ 10 µF;
1210 ≥ 10 µF
16 V
≤ 5%
Exception: 0402 ≥ 180 nF;
0603 ≥ 680 nF;
0805 ≥ 1 µF
≤ 7%
0402 ≥ 330 nF;
0603 ≥ 2.2 µF;
0805 ≥ 10 µF
≤ 10%
1206 ≥ 10 µF;
1210 ≥ 10 µF
≥ 25 V
≤ 3.5%
Exception: 0402 ≥ 27 nF;
1206 ≥ 4.7 µF;
0603 ≥ 220 nF;
Insulation resistance after 1 minute at Ur (DC)
≤ 5%
1210 ≥ 10 µF
0402 ≥ 180 nF
0805 ≥ 4.7 µF;
0805 ≥ 2.2 µF;
≤ 7%
1206 ≥ 10 µF
≤ 10%
Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
Operating temperature range:
±15%
–55 °C to +85 °C
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
ΔC
C
(%)
General Purpose & High Cap.
X5R
4 V to 50 V
10
18
YNM0021
15
10
5
0
−5
−10
−15
−60
Fig. 3
−35
-10
15
40
65
90
T (oC)
Typical capacitance change as a function of
temperature
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
11
18
Size 0201 10 nF / 16 V
Solid lines: Impedance / Dotted lines: ESR
YNM0024
100.00
Z
(Ω)
10.00
1.00
0.10
0.01
0.00
0.01
0.10
1.00
10.00
f (MHz)
100.00
Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0603 1 µF / 10 V
Solid lines: Impedance / Dotted lines: ESR
YNM0025
100.00
Z
(Ω)
10.00
1.00
0.10
0.01
0.00
0.01
0.10
1.00
10.00
f (MHz)
100.00
Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
12
18
Size 0805 10 µF / 6.3 V
Solid lines: Impedance / Dotted lines: ESR
YNM0028
100.00
Z
(Ω)
10.00
1.00
0.10
0.01
0.00
0.01
0.10
1.00
10.00
f (MHz)
100.00
Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 1206 10 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR
YNM0027
100.00
Z
(Ω)
10.00
1.00
0.10
0.01
0.00
0.01
0.10
1.00
10.00
f (MHz)
100.00
Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
13
18
Size 1210 10 µF / 25 V
Solid lines: Impedance / Dotted lines: ESR
YNM0028
100.00
Z
(Ω)
10.00
1.00
0.10
0.01
0.00
0.01
0.10
1.00
10.00
f (MHz)
100.00
Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
SOLDERING RECOMMENDATION
Table 7
SOLDERING
METHOD
SIZE
0402
0603
0805
1206
≥ 1210
Reflow
≥ 0.1 µF
≥ 1.0 µF
≥ 2.2 µF
≥ 4.7 µF
Reflow only
Reflow/Wave
< 0.1 µF
< 1.0 µF
< 2.2 µF
< 4.7 µF
---
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
14
18
TESTS AND REQUIREMENTS
Table 8 Test procedures and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Mounting
IEC 60384- 4.3
21/22
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Any applicable method using × 10 magnification
In accordance with specification
Visual
Inspection and
Dimension
Check
4.4
Capacitance (1)
4.5.1 Class 2:
At 20 °C, 24 hrs after annealing
Within specified tolerance
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Dissipation
Factor (D.F.) (1)
4.5.2 Class 2:
At 20 °C, 24 hrs after annealing
In accordance with specification
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Insulation
Resistance
4.5.3 At Ur (DC) for 1 minute
In accordance with specification
Temperature
Characteristic
4.6
<General purpose series>
Class 2:
Between minimum and maximum temperature
X5R: -55 °C to +85 °C
Normal Temperature: 20 °C
∆C/C
Class 2:
X5R: ±15%
<High Capacitance series>
∆C/C
Class 2:
X5R: ±15%
Adhesion
4.7
A force applied for 10 seconds to the line joining the terminations
and in a plane parallel to the substrate
Force
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
NOTE
1. The figure indicates typical inspection. Please refer to individual specifications.
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Bond
Strength of
Plating on
End Face
IEC 6038421/22
Mounting in accordance with IEC 60384-22 paragraph 4.3
No visible damage
Conditions: bending 1 mm at a rate of 1 mm/s, radius jig
340 mm
<General purpose series>
4.8
15
18
∆C/C
Class2:
X5R: ±10%
<High Capacitance series>
∆C/C
Class2:
X5R: ±10%
Resistance to
Soldering
Heat
4.9
Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute
Dissolution of the end face plating shall
not exceed 25% of the length of the
edge concerned
Preheating: for size >1206: 100 °C to 120 °C for 1 minute
and 170 °C to 200 °C for 1 minute
<General purpose series>
Precondition: 150 +0/–10 °C for 1 hour, then keep for 24
±1 hours at room temperature
Solder bath temperature: 260 ±5 °C
Dipping time: 10 ±0.5 seconds
Recovery time: 24 ±2 hours
∆C/C
Class2:
X5R: ±10%
<High Capacitance series>
∆C/C
Class2:
X5R: ±10%
D.F. within initial specified value
Rins within initial specified value
Solderability
4.10
Preheated the temperature of 80 °C to 140 °C and
maintained for 30 seconds to 60 seconds.
The solder should cover over 95% of
the critical area of each termination
Test conditions for lead-free containing solder alloy
Temperature: 235 ±5 °C
Dipping time: 2 ±0.2 seconds
Depth of immersion: 10 mm
Alloy Composition: 60/40 Sn/Pb
Number of immersions: 1
Test conditions for lead-free containing solder alloy
Temperature: 245 ±5 °C
Dipping time: 3 ±0.3 seconds
Depth of immersion: 10 mm
Alloy Composition: SAC305
Number of immersions: 1
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Rapid Change
of
Temperature
IEC 6038421/22
Preconditioning;
150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at
room temperature
No visual damage
4.11
4 V to 50 V
16
18
<General purpose series>
∆C/C
5 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
Class2:
X5R: ±15%
<High Capacitance series>
Recovery time 24 ±2 hours
∆C/C
Class2:
X5R: ±15%
D.F. meet initial specified value
Rins meet initial specified value
Damp Heat
with Ur Load
4.13
1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at
room temp
2. Initial measure:
Spec: refer to initial spec C, D, IR
3. Damp heat test:
500 ±12 hours at 40 ±2 °C;
90 to 95% R.H. 1.0 Ur applied
4. Recovery:
Class 2: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements have
been made the capacitor shall be preconditioned
according to “IEC 60384 4.1” and then the requirements
shall be met.
No visual damage after recovery
<General purpose series>
∆C/C
Class2:
X5R: ±15%
D.F.
Class2:
X5R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
Rins
Class2:
X5R: ≥ 500 MΩ or Rins x Cr ≥ 25s
whichever is less
<High Capacitance series>
∆C/C
Class2:
X5R: ±20%
D.F.
Class2:
X5R: 2 x initial value max
Rins
Class2:
X5R: 500 MΩ or Rins x Cr ≥ 25s
whichever is less
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Endurance
IEC 6038421/22
1. Preconditioning, class 2 only:
No visual damage
4.14
150 +0/-10 °C /1 hour, then keep for 24 ±1 hour
at room temp
2. Initial measure:
Spec: refer to initial spec C, D, IR
3. Endurance test:
Temperature: X5R: 85 °C
Specified stress voltage applied for 1,000 hours:
Applied 2.0 x Ur for general product.
Applied 1.5 x Ur for high cap. product.
4. Recovery time: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be preconditioned
according to “IEC 60384 4.1” and then the
requirements shall be met.
4 V to 50 V
17
18
<General purpose series>
∆C/C
Class2:
X5R: ±15%
D.F.
Class2:
X5R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
Rins
Class2:
X5R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
<High Capacitance series>
∆C/C
Class 2:
X5R: ±20%
D.F.
Class 2:
X5R: 2 x initial value max
Rins
Class 2:
X5R: 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
Voltage Proof
IEC 60384-1 4.6
Specified stress voltage applied for 1 minute
Ur ≤ 100 V: series applied 2.5 Ur
100 V < Ur ≤ 200 V series applied (1.5 Ur + 100)
200 V < Ur ≤ 500 V series applied (1.3 Ur + 100)
Ur > 500 V: 1.3 Ur
I: 7.5 mA
No breakdown or flashover
www.yageo.com
Feb 10, 2012 V.12
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
18
18
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 12
Feb 10, 2012
-
- Product range updated
Version 11
Oct 21, 2011
-
- Product range updated
Version 10
Jun 21, 2011
-
- Product range updated
Version 9
Mar 23, 2011
-
- Product range updated
Version 8
Jan 25, 2011
-
- Rated voltage of 0201 extend to 50V
Version 7
Jan 05, 2011
-
- Product range updated
Version 6
Jul 27, 2010
-
- Dimension on 0603 and 1206 case size updated
Version 5
Apr 21, 2010
-
- The statement of "Halogen free" on the cover added
- Dimension updated
Version 4
Jan 13, 2010
-
- Thickness updated
Version 3
Aug 17, 2009
-
- Dimension updated
Version 2
Jun 09, 2009
-
- Ordering code updated
Version 1
May 15, 2009
-
- Product range updated
Version 0
Apr 15, 2009
-
- New datasheet for general purpose and high capacitance X5R series with
RoHS compliant
- Replace the "6.3V to 50V" part of pdf files: UP-X5R_X7R_HighCaps_6.3to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11
- Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2
and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2
- Define global part number
- Description of "Halogen free compliant" added
- Test method and procedure updated
www.yageo.com
Feb 10, 2012 V.12
Similar pages