Click on Series name for product info on aimtec.com Series AM2LS-NZ 2 Watt | DC-DC Converter FEATURES: • • • • SMD Package Efficiency up to 86% Unregulated Industry Standard Pinout • Single Output Models o o • Operating temperature -40 C to +105 C • Input / Output Isolation 1500 & 3000 VDC • Continuous Short Circuit Protection for 1500VDC models only Models Single output Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 9 12 15 5 9 12 15 24 15 5 9 12 15 24 400 400 222 167 133 400 222 167 133 83 133 400 222 167 133 83 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 78 79 82 82 83 79 82 82 83 84 83 79 82 82 83 86 AM2LS-0503S-NZ AM2LS-0505S-NZ AM2LS-0509S-NZ AM2LS-0512S-NZ AM2LS-0515S-NZ AM2LS-1205S-NZ AM2LS-1209S-NZ AM2LS-1212S-NZ AM2LS-1215S-NZ AM2LS-1224S-NZ AM2LS-1515S-NZ AM2LS-2405S-NZ AM2LS-2409S-NZ AM2LS-2412S-NZ AM2LS-2415S-NZ AM2LS-2424S-NZ AM2LS-0505SH30-NZ 4.5-5.5 5 400 3000 220 79 AM2LS-0509SH30-NZ 4.5-5.5 9 222 3000 220 82 AM2LS-0512SH30-NZ 4.5-5.5 12 167 3000 220 82 AM2LS-0515SH30-NZ 4.5-5.5 15 133 3000 220 83 AM2LS-1205SH30-NZ 10.8-13.2 5 400 3000 220 79 AM2LS-1212SH30-NZ 10.8-13.2 12 167 3000 220 82 AM2LS-1215SH30-NZ 10.8-13.2 15 133 3000 220 83 AM2LS-1224SH30-NZ 10.8-13.2 24 83 3000 220 84 AM2LS-1515SH30-NZ 13.5-16.5 15 133 3000 220 83 AM2LS-2405SH30-NZ 21.6-26.4 5 400 3000 220 79 AM2LS-2412SH30-NZ 21.6-26.4 12 167 3000 220 82 AM2LS-2415SH30-NZ 21.6-26.4 15 133 3000 220 83 AM2LS-2424SH30-NZ 21.6-26.4 24 83 3000 220 84 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Quiescent Current Nominal 5 12 15 24 5 12 15 24 Reflected Input Ripple Current Absolute Max Input (1sec max) Filter www.aimtec.com F 051e R12.G 5 Vin 12 Vin 15 Vin 24 Vin Typical 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 30 25 18 15 15 9 18 21 30 Capacitor Tel: +1 514 620 2722 1 of 4 Maximum Units VDC mA mA VDC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2LS-NZ 2 Watt | DC-DC Converter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec 500VDC 1500 & 3000 >1000 20 Maximum Units VDC MOhm pF Output Specifications Parameters Voltage accuracy Conditions Typical 100% load (see tolerance chart) ±2.5 Continuous Auto Recovery 12 & 15 VDC input models 1500VDC models only Short Circuit protection 5 & 24 VDC Input models & 3000VDC models For ±1% of Vin 3.3V models only 3.3V 5V 9V 12 V 15 V 24 V 100% load At 20 MHz Bandwidth Line voltage regulation Load voltage regulation (10% - 100% load) Temperature coefficient Ripple & Noise Maximum Units % 1 ±1.5 ±1.2 18 12 9 8 7 6 ±0.03 150 Sec % of Vin % o %/ C mV p-p * Products with 5Vdc and 24Vdc input voltage; the supply voltage must be discontinued at the end of short circuit duration. General Specifications Parameters Switching frequency Operating temperature Storage temperature Cooling Storage Humidity Case material Conditions Typical Maximum Units 100% load With derating 3.3V & 5V above +71C Others +85C 100 300 KHz o -40 to +105 C o -55 to +125 Free air convection Non Condensing Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Maximum case temperature C 95 Epoxy resin (UL94-V0) 1500VDC models 1.4 3000VDC models 1.6 0.50 x 0.44 x 0.28 inches 12.70 x 11.20 x 7.25 mm o >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) 1.5mm from case for 10 sec 300 105 % RH g o C C o Safety Specifications Parameters Standards www.aimtec.com F 051e R12.G EN 55022, Class B, with external filter IEC 61000-4-2, Contact ±8KV, Criteria B Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2LS-NZ 2 Watt | DC-DC Converter Pin Out Specifications Pin 1 2 3 4 5 6 7 8 Dimensions Single Output Models Single Output Front View 8.3 (0.32) Side View - V Input + V Input No Pin .-V Output +V Output No Pin No Pin N.C. 5.00 (0.19) 0º~10º angle 2.0 (0.08) 0.25 (0.01) 1.45 (0.06) Top View 0.88 (0.04) 12.70 (0.50) 7.62 (0.30) 11.20 8.30 (0.44) (0.32) 1 0.60 (0.02) 2.54 (0.10) Recommended Circuits (EMI Class B) Capacitor selection Table Vout C3 3.3 V 10 µF 5V 10 µF 9V 4.7 µF 12 V 2.2 µF 15 V 1 µF 24V 0.47 µF LDM 6.8µH C1 4.7µF/ 50V C2 4.7µF/ 50V +V output +V input DC/DC Converter -V input C3 Load -V output CY 24V input only www.aimtec.com F 051e R12.G Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2LS-NZ 2 Watt | DC-DC Converter Load Accuracy Tolerance Graph Derating Free Air Convection 10 % Rated Output Voltage 71 ºC Typic al loa 100 d line Output Voltage Accuracy% -2.5 % -7.5 % 70 % 10 % 85 ºC +2.5 % 50 % Output Current % (Nominal Input) 100 % Output Power % 5% 3.3V & 5V 80 Others Safe Operating Area 60 50% 40 20 71C 0 -50 -30 0 40 105C 85C 80 100 120 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4 . All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.G Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only