BSI pending PhotoMOS RELAYS RF (Radio Frequency) Type Low C and R 6.4±0.05 .252±.002 3.6±0.2 .142±.008 8.8±0.05 .346±.002 6.4±0.05 .252±.002 3.9±0.2 .154±.008 8.8±0.05 .346±.002 mm inch 1 6 2 5 3 4 FEATURES TYPICAL APPLICATIONS 1. Low output capacitance between output terminals and low ON-resistance 2. High speed switching (Turn on time: typ. 200µs) 3. High sensitivity Control loads up to 250mA with input current 5mA 4. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes, where as this PhotoMOS relay has only 20pA (typical) even with the rated load voltage 5. Controls low-level analog signals PhotoMOS relays features extremely lowclosed-circuit offset voltage to enable control of low-level analog signals without distortion 6. Low thermal electromotive force (Approx. 1 µV) Measuring and testing equipment 1. Testing equipment for semiconductor performance IC tester, Liquid crystal driver tester, semiconductor performance tester 2. Board tester Bear board tester, In-circuit tester, function tester 3. Medical equipment Ultrasonic wave diagnostic machine 4. Multi-point recorder (warping, thermo couple) TYPES Part No. Output rating* Type Load voltage AC/DC type 40 V Through hole terminal Load current 150 mA Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQV221N Packing quantity Surface-mount terminal AQV221NA AQV221NAX AQV221NAZ Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Input Output LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage Type of Symbol connection IF VR IFP Pin VL A IL B C Ipeak Pout PT Viso Topr Tstg AQV221N(A) 50 mA 3V 1A 75 mW 40 V 0.15 A 0.18 A 0.25 A 0.45 A 360 mW 410 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f = 100 Hz, Duty factor = 0.1% A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC Non-condensing at low temperatures 145 AQV221N 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Type of Symbol connection** Item Typical LED operate current Input Maximum Minimum Typical Typical Maximum LED turn off current LED dropout voltage IFon — IFoff — VF — Ron A Ron B Ron C Cout A AQV221N(A) 0.90 mA 3.0 mA 0.4 mA 0.85 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V Typical Maximum Typical On resistance # Maximum Typical Output Maximum Turn on time* Switching speed Turn off time* Transfer characteristics I/O capacitance Initial I/O isolation resistance 9.8 Ω IL = Max. IL = Max. IF = 5 mA IF = 0 mA IL = Max. Within 1 s on time 15 Ω 5Ω IF = 5 mA IL = Max. Within 1 s on time 7.5 Ω 2.5 Ω IF = 5 mA IL = Max. Within 1 s on time 3.8 Ω Maximum 5 pF IF = 0 VB = 0V f = 1 MHz Typical Maximum Typical IF = 0 VL = Max. Typical 3.9 pF Output capacitance # Off state leakage current Remarks Maximum Typical Maximum Typical Maximum Minimum ILeak — 20 pA 10 nA Ton — 0.2 ms 0.5 ms IF = 5 mA IL = Max. Toff — 0.08 ms 0.2 ms IF = 5 mA IL = Max. Ciso — 0.8 pF 1.5 pF f = 1 MHz VB = 0 Riso — 1,000 MΩ Note: Recommendable LED forward current IF = 5mA *Turn on/Turn off time 500 V DC **For type of connection, see Page 31. Input # Other types of products than the Cout (typ. 3.9pF) and Ron (A connection typ. 9.8Ω) combinations carried in this catalog are also available. (There is a trade-off between Ron and Cout both cannot be reduced at the same time.) For more information, please contact our sales office in your area. 90% Output 10% Ton Toff ■ For Dimensions, see Page 27. ■ For Schematic and Wiring Diagrams, see Page 31. ■ For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 16.0 250 1.0 150 100 Turn on time, ms On resistance, Ω Load current, mA 14.0 200 12.0 10.0 8.0 6.0 0.8 0.6 0.4 4.0 50 0.2 2.0 0 -40 146 -20 0 20 40 60 8085 100 Ambient temperature, °C 0 -40 -20 0 20 40 60 8085 Ambient temperature, °C 0 -40 -20 0 20 40 60 8085 Ambient temperature, °C AQV221N 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.3 0.2 0.1 LED turn off current, mA 0.4 4 3 2 -40 0 8085 0 20 40 60 Ambient temperature, °C -20 -40 -20 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Current, mA LED dropout voltage, V 1.4 1.3 –4 –3 –2 0 -40 -20 0 100 50 1 2 3 4 Voltage, V –50 –100 -20 0 20 40 60 8085 Ambient temperature, °C Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 10–9 10–12 –150 20 40 60 8085 Ambient temperature, °C -40 10–6 –1 50mA 30mA 20mA 10mA 5mA 1.0 2 9. Off state leakage current 150 1.5 1.1 3 0 0 20 40 60 8085 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 1.2 4 1 1 Off state leakage current, A 0 5 5 LED operate current, mA Turn off time, ms 0.5 0 40 100 Load voltage, V 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz, 30 mVrms; Ambient temperature: 25°C 77°F 1.4 0.22 Output capacitance, pF 10 Turn off time, ms Turn on time, ms 1.2 1.0 0.8 0.6 0.18 0.14 0.10 8 6 4 0.4 0.06 2 0.2 0 0 10 0 20 30 40 50 LED forward current, mA 0 10 0 20 30 40 50 LED forward current, mA 14. Insertion loss characteristics (50 Ω impedance) Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 80 4 20 20 0 104 105 106 Frequency, Hz 107 Quantity, n 25 40 3 10 1 5 104 105 106 Frequency, Hz 50 15 2 0 20 30 40 Applied voltage, V Measured portion: between terminals 4 and 6 Continuous load current: 150mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F 5 60 10 15. On resistance distribution 100 Insertion loss, dB Isolasion, dB 13. Isolation characteristics (50 Ω impedance) 0 107 0 0 9.2 9.4 9.6 9.8 On resistance, Ω 10 147 AQV221N 16. Turn on time distribution 17. Turn off time distribution 18. LED operate current distribution Load voltage: 40V(DC) Continuous load current: 150mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F Load voltage: 40V(DC) Continuous load current: 150mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F Load voltage: 40V(DC) Continuous load current: 150mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F 50 35 35 30 30 20 15 Quantity, n 25 Quantity, n Quantity, n 40 30 10 10 5 5/7/2001 148 20 15 20 10 0 25 0 0.15 0.2 0.25 0.3 Turn on time, ms 0.35 0 5 0 0.07 0.09 0.11 0.13 Turn off time, ms 0.15 0 0 0.7 0.8 0.9 1 1.1 LED operate current, mA All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog