ABS2U THRU ABS10U SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface mount application Plastic material-UL flammability 94V-0 ABS 0.165(4.2) 0.150(3.8) 0.268(6.8) 0.236(6.0) - 0.010(0.25) 0.006(0.15) + 0.268(6.8) 0.236(6.0) 0.181(4.6) 0.165(4.2) Mechanical Data · Case: SOPA-4, molded plastic ABS · Terminals: plated leads solderable per 0.028(0.7) 0.020(0.5) MIL-STD-202, Method 208 MAX 0.0078(0.2) · Polarity: as marked on case · Mounting position: Any · Marking: type number 0.209(5.3) 0.189(4.8) 0.058(1.5) 0.046(1.2) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL VRWM RMS Reverse Voltage VRMS Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t<8.3ms) Forward Voltage per element Peak Reverse Current At Rated DC Blocking Voltage @IF=0.5A @IF=1.0A @TA =25℃ @TA =125 ℃ Typical Thermal Resistance per leg (Note 1) Operating and Storage Temperature Range ABS4U ABS6U ABS8U ABS10U UNITS 200 400 600 800 1000 V 140 280 420 560 700 V VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current @Tc=100 ℃ ABS2U VDC IF(AV) 1.0 A IFSM 35 A I2t 5.08 A2 s VFM 0.95 1.0 V IR 5.0 200 uA RθJA 62.5 RθJL 25 TJ,TSTG -55to+150 ℃/W ℃ Note:1.Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. version:02 1 of 3 www.dyelec.com ABS2U THRU ABS10U FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD CURRENT (A) 1.2 FIG. 2 TYPICAL FORWARD CHARACTERISTIC 1.0 0.8 0.6 0.4 0.2 0 0 30 60 90 120 150 1 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE (V) CASE TEMPERATURE( oC) FIG.3 MAXIMUM NON-REPETITIVE FORWARD FIG. 4 TYPICAL REVERSE CHARACTERISTICS 100 50 8.3ms Single Half Sine-Wave 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 INSTANTANEOUS REVERSE CURRENT (uA) PEAK FORWARD SURGE CURRENT (A) SURGE CURRENT TA=125℃ 10 1 TA=75 ℃ 0.1 TA=25 ℃ 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) version:02 2 of 3 www.dyelec.com 140 ABS2U THRU ABS10U Important Notice and Disclaimer •Reproducing and modifying information of the document is prohibited without permission from DIYI. • DIYI reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. •DIYI disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. •DIYI does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Applications shown on the herein document are examples of standard use and • operation. Customers are responsible in comprehending the suitable use in particular applications. DIYI makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. •The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify DIYI for any damages resulting from such improper use or sale. •Since DIYI uses lot number as the tracking base, please provide the lot number for tracking when complaining. version:02 3 of 3 www.dyelec.com