Single Channel CWDM OADM (1x2) CWDMG 1x2 Series Product Description Oplink’s single channel Coarse WDM is based on patented athermal platform for optical device. This multiplexer features ultra low insertion loss, super thermal stability, and unparallel reliability.The technology is a lead-free packaging platform and no epoxy in the optical path. Green CWDM is Telcordia GR1221 and GR-1209 tested, qualified for uncontrolled environment applications and complied with industry green initiatives such as RoHS and WEEE. Oplink can provide customized designs to meet specialized feature applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. Performance Specificationns CWDMG Series Min Operating Wavelength Range Unit Features ITU Grid nm Environmental Green Plan Compliance 20 nm Ultra-Low Insertion Loss λC ± 6.5 nm Narrow Down Distribution dB Super Thermal Stability Channel Spacing Passband Bandwidth @ 0.5dB length range and all temp, all SOP) Max nm Center Wavelength λC Insertion Loss 1) (Over all wave- Typical 1460~1620 or 1260~1620 Pass Port 0.35 0.45 Reflect Port 0.3 0.35 Polarization Dependent Loss (PDL) 0.10 dB Polarization Mode Dispersion (PMD) 0.10 ps Passband Ripple 0.20 dB Highly Reliability High Channel Isolation Epoxy-free Optical Path Adjacent Channel Band Isolation 30 dB Non-adjacent Channel Band Isolation 40 dB Return Loss 50 dB Applications Directivity 50 dB WDM Systems For Metro/Access Market Operating Power 500 Operating Temperature Storage Temperature Fiber Type Package Dimensions mW 0 to +70 °C -40 to +85 °C Corning SMF-28 or equivalent 3) 250µm Bare Fiber P1 (Φ)5.5±0.2 x (L)34.0±1.0 900µm loose tube P2 (Φ)5.5±0.2 x (L)40.0±1.0 mm Note: [1] All spec excluding connectors [2] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. S0007 - R05. 20110523 Single Channel CWDM OADM (1x2) CWDMG 1x2 Series Mechanical Drawing / Package Dimensions (dimension in mm) L Ø Port 1 (Common) Port 2 (Pass) 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Port 3 (Reflect) Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. CWDM G 0 Platform Green = G 0 Center Wavelength Fiber Length** Refer ITU Grid Table 0.5 Meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Operating Wavelength Range* 1460~1620nm = 0 1260~1620nm = 1 Package Type 250μm Bare Fiber = 1 900μm Loose Tube = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A LC/APC = B Center Wavelength Table (nm, ITU Grid):ns 1271 1471 1270 1470 1291 1491 1290 1490 1311 1511 1310 1510 1331 1531 1330 1530 1351 1551 1350 1550 1371 1571 1370 1570 1391 1591 1390 1590 1411 1611 1410 1610 1431 1430 1451 1450 * 1460~1620nm operating wavelength range is applicable for 1471~1611nm and 1470~1610nm channels only. 1260~1620nm operating wavelength range is applicable for all channels. ** The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. S0007 - R05. 20110523 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules