Not for New Design - End of Life January 2013 - Please refer to F1710 300V Y2 (26545) F1710-250 V www.vishay.com Vishay Roederstein Interference Suppression Film Capacitors MKT Radial Potted Type FEATURES • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Rated AC voltage Terminals Coating Technical data 250 VAC, 50 Hz/60 Hz Radial tinned wire Plastic case, epoxy resin sealed, flame retardant, UL-class 94 V-0 Please refer to www.vishay.com/doc?26525 DIMENSION in millimeters AND ORDERING CODE L W H ± 0.4 PCM ± 0.4 X Ø 0.8 ORDERING CODE (1) F1710-. . .-1004 F1710-. . .-1000 F1710-. . .-1015 F1710-. . .-1030 LEAD LENGTH X (mm) 4-1 6-1 15-1 30+5 Note (1) These capacitors can be delivered on continuous tape and reel (see www.vishay.com/doc?28139). The ordering code is then: F1710-. . .-1900 at H = 16 mm, F1710-. . .-1901 at H = 18.5 mm. ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) 250 CAP. (μF) TOL. (%) PITCH (mm) BOX NO. DIMENSIONS WxHxL (mm) (+ 0.2 mm/- 0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) QUANTITY PACKAGE LEAD LENGTH 6-1 mm (pcs) ORDERING CODE (2) F1710-210-10 . . 0.0010 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 0.0012 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-212-10 . . 0.0015 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-215-10 . . 0.0018 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-218-10 . . 0.0022 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-222-10 . . 0.0027 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-227-10 . . 0.0033 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-233-10 . . 0.0039 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-239-10 . . 0.0047 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-247-10 . . 0.0056 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 F1710-256-10 . . Revision: 28-Sep-12 Document Number: 26526 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - End of Life January 2013 - Please refer to F1710 300V Y2 (26545) F1710-250 V www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) CAP. (μF) TOL. (%) PITCH (mm) BOX NO. DIMENSIONS WxHxL (mm) (+ 0.2 mm/- 0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) QUANTITY PACKAGE LEAD LENGTH 6-1 mm (pcs) ORDERING CODE (2) F1710-268-10 . . 0.0068 ± 20 15 05 5.3 x 10.3 x 17.8 1.4 750 0.0082 ± 20 15 06 6.3 x 12.3 x 17.8 2.0 500 F1710-282-10 . . 0.010 ± 20 15 06 6.3 x 12.3 x 17.8 2.0 500 F1710-310-10 . . 0.012 ± 20 15 07 7.3 x 13.3 x 17.8 2.4 450 F1710-312-10 . . 0.015 ± 20 15 07 7.3 x 13.3 x 17.8 2.4 450 F1710-315-10 . . 0.018 ± 20 15 28 8.3 x 17.3 x 17.8 3.4 300 F1710-318-10 . . 0.022 ± 20 15 28 8.3 x 17.3 x 17.8 3.4 300 F1710-322-10 . . 0.027 ± 20 22.5 09 6.3 x 14.3 x 26.3 3.5 260 F1710-327-10 . . 0.033 ± 20 22.5 09 6.3 x 14.3 x 26.3 3.5 260 F1710-333-10 . . 0.039 ± 20 22.5 11 7.3 x 15.3 x 26.3 3.9 235 F1710-339-10 . . 0.047 ± 20 22.5 12 8.3 x 16.3 x 26.3 4.8 200 F1710-347-10 . . 0.056 ± 20 22.5 13 10.3 x 18.3 x 26.3 6.6 170 F1710-356-10 . . 0.068 ± 20 22.5 13 10.3 x 18.3 x 26.3 6.6 170 F1710-368-10 . . 0.082 ± 20 27.5 14 11.0 x 20.3 x 31.3 9.4 125 F1710-382-10 . . 0.100 ± 20 27.5 14 11.0 x 21.0 x 31.0 9.4 125 F1710-410-10 . . 250 Notes • Preferred values in bold print. (1) For further information about packaging quantities with different lead length and/or taped versions please see www.vishay.com/doc?27608. Use box no. as reference. (2) These capacitors can be delivered on continuous tape and reel (see www.vishay.com/doc?28139). The ordering code is then: F1710-. . .-1900 at H = 16 mm, F1710-. . .-1901 at H = 18.5 mm. APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE U.S.A. (for AC 250 V) UL 1283 UL 1414 0.01 μF X to 0.1 μF X 0.01 μF X to 0.1 μF X E 76297 E 100682 Canada (for AC 250 V) C 22.2 No. 1-M 1994 1000 pF Y2 to 0.1 μF Y2 2167188 1000 pF Y2 to 0.1 μF Y2 DE 1-8790 1000 pF Y2 to 0.1 μF X2 94613 CB TEST-CERTIFICATE (for AC 275 V) Germany EN 132 400; 1999 IEC 60384-14, 2nd edition, 1995 APPROVAL MARK This approval mark together with the CB-certificate replace all national approval marks of the following countries (they have already signed the CB-agreement): Austria Belgium France Germany Ireland Italy Switzerland Israel Portugal Spain Great Britain Netherlands Japan Singapore Revision: 28-Sep-12 Denmark Finland Sweden Norway China Poland Czech. Republic Rep. of Korea Hungary Iceland Slovenia Document Number: 26526 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - End of Life January 2013 - Please refer to F1710 300V Y2 (26545) F1710-250 V www.vishay.com Vishay Roederstein Z (Ω) IMPEDANCE (Z) AS A FUNCTION OF FREQUENCY (f) AT Ta = 20 °C (AVERAGE) 101 10-3 0.01 0.5 1.0 0.047 µF 0.022 µF 0.015 µF 0.01 µF 0.068 µF 0.033 µF 0.22 µF 0.47 µF 0.05 0.1 0.15 µF 2.2 µF 1.5 µF 1 µF 0.68 µF 10-2 0.33 µF 10-1 0.1 µF 100 5.0 10 Z (Ω) f 50 100 (MHz) 101 100 0.1 µF 0.082 µF 0.068 µF 0.056 µF 0.047 µF 0.039 µF 0.033 µF 0.027 µF 0.022 µF 0.015 µF 0.01 µF 10-1 10-2 10-3 0.01 0.05 0.1 0.5 1.0 5.0 10 f 50 100 (MHz) Measurement with lead length 6 mm. Revision: 28-Sep-12 Document Number: 26526 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000