March 6, 2007 SMD INDUCTOR DR353-5 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 0.12µH to 10.0mH Operating Temp. -25°C to + 85°C Tinned Leads with Leaded Solder is Available (note 6) ELECTRICAL SPECIFICATIONS AT 25ºC Part No. DR353-5-121 DR353-5-271 DR353-5-471 DR353-5-102 DR353-5-152 DR353-5-222 DR353-5-332 DR353-5-472 DR353-5-682 DR353-5-103 DR353-5-153 DR353-5-223 DR353-5-333 DR353-5-473 DR353-5-683 DR353-5-104 DR353-5-154 DR353-5-224 DR353-5-334 DR353-5-474 DR353-5-684 DR353-5-105 DR353-5-225 DR353-5-475 DR353-5-106 DATATRONIC: Inductance (µH) 0.12±20% 0.27±20% 0.47±20% 1.0±20% 1.5±20% 2.2±20% 3.3±20% 4.7±20% 6.8±20% 10±20% 15±20% 22±20% 33±20% 47±20% 68±20% 10020% 150±20% 220±20% 330±20% 470±20% 680±20% 1000±20% 2200±20% 4700±20% 10000±20% @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @100kHz @100kHz @100kHz @100kHz @100kHz @100kHz @10kHz @10kHz @10kHz @10kHz DCR (Ω) Max. 0.0098 0.0140 0.0182 0.0270 0.0310 0.0410 0.0500 0.0574 0.1040 0.1300 0.210 0.266 0.448 0.560 0.938 1.204 2.660 3.360 6.160 7.560 11.340 14.420 30.100 61.040 140.000 I rated (mA) Max. 6000 5300 4800 4000 3700 3200 2900 2700 2000 1700 1400 1200 900 800 640 560 420 320 270 240 190 150 100 70 50 SRF (MHz) Min. 450 300 200 150 110 80 40 30 25 20 17 15 12 10 7.6 6.5 5.0 4.0 3.1 2.4 1.9 1.7 1.2 0.8 0.5 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. March 6, 2007 MECHANICAL OUTLINES 5.7 0.3 2.0 2.0 2.0 353-5 XXX 5.0 TOP VIEW PCB SOLDER PAD LAYOUT (REF.) 4.7 0.3 1 FRONT VIEW 1.3 Min. 1.7 Min. 1.3 Min. 2 SCHEMATIC 5.0 0.3 BOTTOM VIEW Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Irated for an approximate 40°C temperature rise 4. Irated for an approximate 20% drop maximum of the initial value 5. Tape and reel quantity, 1000 pcs/reel 6. For non-RoHS parts replace DR prefix with 42- (e.g. DR353-5 becomes 42-353-5) 7. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 909-928-7700 Toll Free Tel: 888-889-5391 Fax: 909-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.