DIODE MODULE DD(KD)100HB120/160 UL;E76102 （M） Power Diode Module DD100HB series are designed for various rectifier circuits. DD100HB has two diode chips connected in series and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1,600V is avaiable for various input voltage. （Applications） Various rectifiers, Battery chargers, DC motor drives DD ２ ３ １ 2- 6.5 2 1 13 26MAX 3 ~ + 16.5 – 23 23 3M5 21 mounting base elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability ● Two 30MAX ● Isolated 93.5MAX 80 ２ ３ １ KD Unit：a ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Ratings Item DF100HB120 DD100HB160 Unit VRRM Repetitive Peak Reverse Voltage 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 1350 1700 V Symbol Item Conditions Ratings Unit IF（AV） Average Forward Current Single phase, half wave, 180°conduction, Tc：111℃ 100 A IF (RMS) R.M.S. Forward Current Single phase, half wave, 180°conduction, Tc：111℃ 155 A Surge Forward Current 1 ／2 cycle, I2t I2t Value for one cycle of surge current IFSM 50/60HZ, peak value, non-repetitive A 1800/2000 16500 A2S Tj Junction Temperature −40 to ＋150 ℃ Tstg Storage Temperature −40 to ＋125 ℃ VISO Isolation Voltage Mounting Torque 2500 V Mounting（M6） A.C.1minute Recommended Value 2.5-3.9（25-40） 4.7（48) Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28) N･m （㎏f･B） Mass 170 g ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave. Tj＝150℃ VFM Forward Voltage Drop, max. Foward current 320A，Tj＝25℃，Inst. measurement 1.35 V Junction to case 0.30 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions Ratings Unit 30 mA ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DD(KD)100HB120/160 ２００ Power Dissipation Pav（W） ５ Average Forward Current vs. Power Dissipation Per one element D.C. １５０ ２ １０2 Single Phase Three Phase １００ ５ ２ １０1 ５ ０． ６ ０． ８ １． ０ １． ２ １． ４ １． ６ １． ８ ２． ０ Max. ５０ ０ ０ ２． ２ ２０ １６０ Average Forward Current vs. Allowable Case Temperature ２０００ Per one element １５０ １４０ １３０ １００ ９０ ８０ ０ ２０ ４０ ６０ ８０ １００ D.C. Three Phase Single Phase １２０ １１０ １２０ ４０ ６０ １４０ １２０ １４０ １６０ Per one element Ｔ ｊ=２５℃ start １５００ 60Hz １０００ 50Hz ５００ ０ １ １６０ ２ ５ １０ ２０ ５０ １００ Time（Cycles） Transient Thermal Impedance ０． ４ １００ ２ ５ １０１ Per one element ０． ３ Junction to Case ０． ２ Maximum ０． １ ８００ ５ １０-３ ２ ５ １０-２ ２ ５ １０-１ ２ Time t（sec） Output Current B２；Two Pluse Bridge connection ７００ Id（Aav.） ６００ ５００ ５ １００ B2 ４００ Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W １1０ １２０ ３００ １3０ ２００ １4０ １００ ０ ５０ １００ １５０ ２００ Output Current（A） ０ ２５ １5０ ５０ ７５ １００ １２５ １５０ Ambient Temperature（℃） ８００ Total Power Dissipation（W） ０ Allowable Case Temperature（℃） Transient Thermal Impedance θj-c（℃/W） １００ Cycle Surge Forward Current Rating （Non-Repetitive） Average Forward Current（A） Total Power Dissipation（W） ８０ Average Forward Current（A） Surge Forward Current（A） Allowable Case Temperature Tc（℃） Forward Voltage Drop（V） B６；Six pulse Bridge connection Output Current B6 B6 ７００ Id（Aav.） Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W ６００ １２０ ５００ １３０ ４００ ３００ １４０ ２００ １００ ０ ０ １５０ ３００ ０ Output Current（A） ２５ ５０ １５０ ７５ １００ １２５ １５０ Allowable Case Temperature（℃） Forward Current I（A） F １０3 Maximum Forward Characteristics Ambient Temperature（℃） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]