FD Series Crystal Clock Oscillator (XO) 5.0 x 3.2mm FD 1.2V CMOS Low Jitter XO Package: 5.0 x 3.2mm Ceramic SMD Recommended Land Pattern: Product Features • 1 to 60 MHz Frequency Range • <1 ps RMS jitter with fundamental or overtone design • Low power standby mode • Pb-free and RoHS/Green compliant Product Description Pin Functions: The FD Series 1.2V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 5.0 x 3.2mm surface-mount ceramic package. Pin Function 1 OE Function 2 Ground 3 Clock Output 4 V DD Applications The FD Series is ideal for compact, highdensity applications requiring low jitter or tight stability, including: Part Ordering Information: FD XXX YYYY • Ethernet • Fibre Channel A: Product�Family B: XXX = Frequency�Code C: YYYY = Specification�Code • Serial Attached SCSI (SAS) • Server & Storage platforms Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. • SONET/SDH linecards • T1/E1, T3/E3 linecards • DSLAM • 802.11a/b/g WiFi SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • All specifications are subject to change without notice. www.saronix-ecera.com FD 1.2V REV2010_MAY20_01.3 1 1.2V CMOS Low Jitter XO FD FD Series Crystal Clock Oscillator (XO) 5.0 x 3.2mm Electrical Performance Parameter Min. Output Frequency Typ. Max. Units 60 MHz 1.20 1.32 V 2 mA 1 Supply Voltage 1.08 Supply Current, Output Enabled Frequency Stability Operating Temperature Range Output Logic 1, VOH 30-60 MHz 10 µA Output Hi-Z ±20 to ±50 ppm See Note 1 below -20 +70 -40 +85 Output Logic 0, VOL Commercial (standard) °C Industrial (standard) 10% V DD V 15 pF See Note 2 below 90% V DD V Output Load Duty Cycle As specified 1 to 30MHz 4 Supply Current, Standby Mode Notes 55 % Measured 50% V DD Rise and Fall Time 45 4 ns Measured 20/80% of waveform Jitter, Phase 1 ps RMS (1-σ) 10kHz to 20 MHz frequency band Jitter, Accumulated 5 ps RMS (1-σ) 20.000 adjacent periods Jitter, Total 50 ps pk-pk 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units 0.7 Input Voltage (pin 1), Output Disable (low power standby) 0.3 Internal Pullup Resistance 50 Notes V or open V Output is Hi-Z kΩ Output Disable Delay 100 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 SaRonix-eCera™ is a Pericom® Semiconductor company • Max. Units +125 °C US: +1-408-435-0800 TW: +886-3-4518888 Notes • All specifications are subject to change without notice. www.saronix-ecera.com FD 1.2V REV2010_MAY20_01.3 2 1.2V CMOS Low Jitter XO FD FD Series Crystal Clock Oscillator (XO) 5.0 x 3.2mm Test Circuit Reflow Soldering Profile Temperature – °C As per IPC/JEDEC J-STD-020C 260 1 to 3°C/sec max Peak 260°C for 10 sec max 1 to 3°C/sec 217 Time 60 to 90 sec 4 to 6 minutes max Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • All specifications are subject to change without notice. www.saronix-ecera.com FD 1.2V REV2010_MAY20_01.3 3