Class 2 UL5085 - 3 Transformer 6VA, Inherently Energy Limited Series: CL - Lead Wires & Quick-Connects Power Rating 6VA No Secondary Fusing Required Frequency 50/60Hz Insulation Class F (155°C) Agency Approvals: UL/cUL 5085-3 Class 2 Recognized (File E49606) Insulation File No. E95662 * Multi voltage combinations are available - consult factory. Class 2 Lead Wires Quick-Connects Type HX Foot Mount - Steel bracket welded to the bottom of the laminations for easy mounting Type GX Panel Mount - 0.179” (4.55 mm) diameter holes in each corner to allow direct mounting to a panel. Lead Wires: All leads are 18 AWG stranded 2/64” (0.794 mm) insulation thickness. Standard parts have 12” (305 mm) total length with 1/2” (12.7 mm) strip. Type BB Foot Mount, Pri & Sec on Same Side - Quick connect terminals with line and load terminations on the same side of transformer. Type AE Laydown, Pri & Sec on Top Side - Quick connect terminals with line and load terminations on the top of transformer. Type AB Foot Mount, Pri & Sec on Opposite Side - Quick connect terminals with line and load terminations on opposite sides of transformer Terminals: Standard male quick connects - 0.250” x 0.032” (6.35 x 0.81 mm) Other available quick connects - 0.187” x 0.032” (4.75 x 0.81 mm) Type HX - Foot Mount Type BB - Foot Mount, Pri & Sec on Same Side Type GX - Panel Mount Type AE - Laydown, Pri & Sec on Top Side Primary Voltage Secondary Voltage 6VA Size - 1/2” X 1/2” 115 10 CL06ES37-000* 230 10 CL06ES38-000* UL √ √ Weight (Lbs) 0.350 0.350 Any application, Any requirement, Contact us for our Custom Designs Sales Office: 300 W Factory Road, Addison IL 60101 • Phone: (630) 628-9999 • Fax: (630) 628-9922 • www.wabashtransformer.com 11