C10TJ Ultra fast Plastic Power Rectifiers VOLTAGE: 600V CURRENT:10.0A TO-263AB/D2PACK FEATURE • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction • High voltage and high reliability • High speed switching • Low forward voltage MECHANICAL DATA Case: JEDEC TO-263 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Maximum Maximum Maximum Recurrent Peak Reverse Voltage RMS Voltage DC blocking Voltage Average Forward Rectified at Tc =99°C Non-repetitive Peak Forward Surge Current 50Hz half sine- wav Maximum Forward Voltage at Forward Current 5.0A and 25°C Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =125°C Typical thermal resistance junction to case Storage and Operating Temperature Range SYMBOL C10TJ units Vrrm Vrms Vdc 600 420 600 V V V If(av) 10.0 A Ifsm 80 A Vf 1.7 V Trr 40 30.0 100.0 3.0 -40 to +150 nS Ir Rth(jc) Tstg, Tj µA °C/W °C Note: 1. Reverse Recovery Condition Ta =25℃, Ifm =5.0A, -di/dt =50A/us Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES C10TJ Rev.A2 www.gulfsemi.com