AQS225S RF (Radio Frequency) Type SOP Series 4-Channel (Form A) 16-pin Type PhotoMOS RELAYS FEATURES 4.4 .173 2.1 .083 10.37 .408 mm inch 1. 4-channel(4 Form A) of RF PhotoMOS Relays 2. SO package 16-pin type in super miniature design The device comes in a super-miniature SO package measuring (W)10.37 × (L)4.4 × (H)2.1mm (W) .408×(L).173× (H).083inch— approx. 50% of the footprint size of 8-pin(2-channel) type. 1 16 2 15 3 14 Footprint 4 13 Approx. 50% 5 12 6 11 7 10 8 9 SOP 2-channel type AQS225S 3. Applicable for 4 Form A use, as well as 4 independent 1 Form A 4. Low capacitance between output terminals ensure high response speed: The capacitance between output terminals is small, typically 4.5pF. This enables for a fast operation speed of 0.1ms(typ.). 5. Low-level off state leakage current 6. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion TYPICAL APPLICATIONS • Telephone and data comunication equipment • Measuring equipment • Medical equipment • Industrial equipment TYPES Type AC/DC type Output rating* Load voltage Load current 80 V Part No. Picked from the 1/2/3/4/5/6/7/8-pin side Picked from the 9/10/11/12/13/14/15/16-pin side 50 mA AQS225SX Packing quantity in tape and reel AQS225SZ 1,000 pcs. * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.) (2) For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolatiom voltage Operating Temperature limits Storage 158 Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQS225S 50 mA 3V 1A 75 mW 80 V 0.05 A 0.15 A 600 mW 650 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f = 100 Hz, Duty factor = 0.1% 100 ms (1 shot), VL= DC Non-condensing at low temperatures AQS225S 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current LED turn off current Input LED dropout voltage IFon IFoff VF AQS225S 0.9 mA 3 mA 0.3 mA 0.85 mA 1.14 (1.25 V at IF = 50mA) 1.5 V Condition 21Ω IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 V f = 1 MHz Typical On resistance Ron Output capaci- Typical tance Maximum Typical Maximum Typical Maximum Typical Off state leakage current Turn on time* Transfer characteristics Turn off time* Maximum Typical Maximum I/O capacitance Initial I/O isolaMinimum tion resistance IL = Max. IF = 5mA 35Ω Maximum Output IL = Max. 4.5 pF Cout 6 pF 30 pA 10 nA 0.1 ms 0.3 ms 0.03 ms ILeak Ton Toff Ciso Riso IF = 0 VL = Max. IF = 5 mA IL = Max. IF = 5 mA IL = Max. 0.1 ms 0.8 pF 1.5 pF f = 1 MHz VB = 0 1,000 MΩ 500 V DC Note: Recommendable LED forward current IF= 5 mA. For type of connection, see page 34. *Turn on/Turn off time Input 90% Output 10% Ton Toff ■ For Dimensions, see Page 28. ■ For Schematic and Wiring Diagrams, see Page 34. ■ For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 75 50 0.3 0.25 40 Turn on time, ms On resistance, Ω Load current, mA 100 30 20 0.2 0.15 0.1 25 10 0 –40 –20 0 20 40 60 80 85 100 Ambient temperature, °C 0 0.05 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 159 AQS225S 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 2.5 0.15 0.1 0.05 2.5 LED turn off current, mA LED operate current, mA Turn off time, ms 0.2 2 1.5 1 0.5 0 –40 –20 0 20 40 60 –40 –20 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Ambient temperature: 25°C 77°F 1.5 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 9. Off state leakage current Ambient temperature: 25°C 77°F 1.4 1.3 Off state leakage current, A 50 Current, mA LED dropout voltage, V 1 0 20 40 60 80 85 Ambient temperature, °C Ambient temperature, °C 40 30 20 10 –3 –2.5 –2 –1.5 –1 –0.5 1.2 0.5 1 1.5 2 2.5 3 –10 Voltage, V 50mA 30mA 20mA 10mA 5mA 1.1 1.0 –20 –40 –20 0 10 –3 10 –6 10 –9 10 –12 –30 –40 0 1.5 0.5 0 80 85 2 –50 20 40 60 80 85 Ambient temperature, °C 0 20 40 60 80 Load voltage, V 100 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.25 0.2 0.2 0.15 0.1 0.15 0.1 0.05 0.05 0 6 Output capacitance, pF 0.25 Turn off time, ms Turn on time, ms 10. LED forward current vs. turn on time characteristics 0 10 20 30 40 50 LED forward current, mA 0 60 13. Isolation characteristics (50Ω impedance) 5 4 3 2 1 0 10 20 30 40 50 LED forward current, mA 60 0 0 10 20 30 40 50 60 70 80 Applied voltage, V 14. Insertion loss characteristics (50Ω impedance) Ambient temperature: 25°C 77°F Ambient temperature: 25°C 77°F 6 5 Insertion loss, dB Isolation, dB 100 80 60 4 3 40 2 20 1 0 0 104 5/7/2001 160 105 106 Frequency, Hz 107 104 105 106 Frequency, Hz 107 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog