CX3HSM CRYSTAL 18 kHz to 600 kHz Low Profile Surface Mount Quartz Crystal for Series Oscillators ™ DESCRIPTION The CX3HSM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. These miniature crystals are intended to be used in Series oscillators. They are hermetically sealed in a rugged, miniature ceramic package. They are manufactured using the STATEKdeveloped photolithographic process, and were designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. Maximum process temperature should not exceed 260O C. actual size side view Glass Lid Shown PACKAGE DIMENSIONS D TOP A BOTTOM D FEATURES Miniature tuning fork design D High shock resistance E B C Designed for low power applications TYP. Compatible with hybrid or PC board packaging MAX. DIM inches mm inches mm Low aging A 0.263 6.68 0.270 6.86 Full military testing available B 0.097 2.46 0.104 2.64 Designed and manufactured in the USA C - - D 0.052 1.32 0.058 1.47 E 0.030 0.76 0.035 0.89 EQUIVALENT CIRCUIT DIM “C“” C0 1 L1 C1 R1 2 R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance see below GLASS LID CERAMIC LID MAX inches mm inches mm SM1 0.053 1.35 0.067 1.70 SM2 0.055 1.40 0.069 1.75 SM3 0.058 1.47 0.072 1.83 CONVENTIONAL SERIES OSCILLATOR CIRCUIT Rf SUGGESTED LAND PATTERN 0.070 (1.78) OSCILLATOR 0.110 (2.79) inches (mm) 0.210 (5.33) CX3H XTAL CA RA BUFFER Contact factory for design guidelines RB IS O RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de YS 90 01 ERT T E M C IFIC T A N IO S 10146 - Rev D FIGURE 1 CX3H TYPICAL MOTIONAL RESISTANCE (R1) * Other calibration values available, consult factory. ** Other turning point available. *** Higher shock and vibration available. 1000 R1(k) 500 2 50 20 10 170-249.9 250-600 30 ppm (0.003%) 50 ppm (0.005%) + _ + _ + _ + _ + _ + _ 100 ppm (0.01%) + _ 100 ppm (0.01%) 100 ppm (0.01%) + _ 1000 ppm (0.1%) 1000 ppm (0.1%) 500 ppm (0.05%) 2000 ppm (0.2%) + _ 5000 ppm (0.5%) TERMINATIONS Designation SM1 SM2 SM3 Termination Gold Plated Solder Plated Solder Dipped S “S” if special or custom design. Blank if Std. C SM1 18 50 100 200 600 Frequency (kHz) FIGURE 3 CX3H TYPICAL QUALITY FACTOR (Q) 50 20 10 5 2 18 50 100 200 600 FIGURE 4 CX3H TYPICAL TURNING POINT TEMP. (T0) +80 +70 +60 +50 +40 +30 +20 +10 0 -10 -20 18 50 100 200 600 Note: Frequency f at temperature T is related to frequency f0 at turning point temperature T0 by: f-f0 = k(T-T )2 0 f0 32.0K, 30 Frequency K = kHz Calibration Tolerance @ 25OC (in ppm) SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped 1.0 Frequency (kHz) HOW TO ORDER CX3HSM CRYSTALS CX3H 600 2 0.5 200 ppm (0.02%) 200 ppm (0.02%) + _ 200 5 O + _ 100 FIGURE 2 CX3H TYPICAL MOTIONAL CAPACITANCE (C1) TO( C) + _ 50 Frequency (kHz) Frequency Range (kHz) 75-169.9 18 Frequency (kHz) CX3H Standard Calibration Tolerance at 25OC 18-74.9 100 0 0 C1(fF) Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Frequency Range 18 kHz to 600 kHz Functional Mode Tuning Fork (Flexure) Standard Calibration Tolerance* (see table below) Motional Resistance (R1) See Figure 1 MAX: 18-25 kHz, 2x Typ. 25-600 kHz, 2.5x Typ. Motional Capacitance (C1) Figure 2 Quality Factor (Q) Figure 3 MIN is 0.25x Typ. Shunt Capacitance (C0) 1.8 pF MAX. Drive Level 18-24.9 kHz 0.5 µW MAX. 25-600 kHz 1.0 µW MAX. Turning Point (T0)** Figure 4 Temperature Coefficient (k) -0.035 ppm/0C2 Aging, first year 5 ppm MAX Shock, survival*** 1,500 g peak, 0.3 ms, 1/2 sine Vibration, survival*** 10 g RMS, 20-2,000 Hz random Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC Max Process Temperature 260OC for 20 sec. (in 1000's) SPECIFICATIONS / M Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified PACKAGING OPTIONS CX3HSM - Tray Pack - Tape and Reel (Reference tape and reel data sheet 10109) 10146 - Rev D IS O RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de YS 90 01 ERT T E M C IFIC T A N IO S Blank = Glass Lid C = Ceramic Lid