EL Series • Ratings of 5A, 10A and 20A @ 24-280 VAC • UL Recognized, CE and RoHS Compliant • 5, 12 and 24VDC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 4-8 VDC 10-14 VDC 21-27 VDC 5A 10A 20A EL240A5-05 EL240A5-12 EL240A5-24 EL240A10-05 EL240A10-12 EL240A10-24 EL240A20-05 EL240A20-12 EL240A20-24 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Maximum Load Current [Arms] (2) Minimum Load Current [mArms] Transient Overvoltage [Vpk] Maximum Surge Current (50/60Hz, 1 Cycle) [Apk] Maximum I² t for Fusing (50/60Hz, 1/2 cycle) [A² sec] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Off-State Leakage Current @ Rated Voltage [mArms] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) 5A 10A 20A 24-280 5 150 600 115/120 65/60 500 0.1 6.0 1.3 0.5 24-280 10 150 600 145/150 100/95 500 0.1 4.0 1.3 0.5 24-280 20 250 600 240/250 285/260 500 0.1 2.0 1.3 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Typical Input Current @ nominal turn-on voltage Nominal Input Impedance [Ohms] Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] EL240Axx-05 EL240Axx-12 EL240Axx-24 4-8 VDC 4.0 VDC 1.0 VDC 8.5 mA 470 1/2 Cycle 1/2 Cycle 10-14 VDC 10 VDC 1.0 VDC 9.2 mA 1.2k 1/2 Cycle 1/2 Cycle 21-27 VDC 21 VDC 1.0 VDC 5.9 mA 3.9k 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input to Output (50/60Hz) Dielectric Strength, Output to Baseplate (50/60Hz) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Terminals GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) When mounted to the proper size heat sink (see derating curves) 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models) WIRING DIAGRAM Parameters 3750 Vrms 2500 Vrms 8 pF -30 to 80 °C -30 to 125 °C 0.5 oz (14.4g) 3/16" input, 1/4" output QC MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 111810 ANNEX - ENVIROMENTAL INFORMATION