AZ9701/AZ9711 45 AMP AUTOMOTIVE RELAY FEATURES • • • • • • • • • • • Up to 45 Amp switching capability in a compact size Epoxy sealed versions available Coils to 24 VDC Small footprint 1 Form A and C contacts available Vibration and shock resistant ISO/TS 16949, ISO9001, ISO14000 Tested in accordance with SAE J2544 Cost effective Designed for high in-rush applications UL,CUR file E43203 CONTACTS GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 5 x 106 operations 1 x 105 40 A 14 VDC Res. Arrangement SPST (1 Form A) SPDT (1 Form C) Operate Time (typical) 5 ms at nominal coil voltage Ratings Resistive load: Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Max. switched power: Form A: 630 W Form C: 630 W/420W N.O./N.C. Max. switched current: Form A: 45 A Form C: 45 A/30A N.O./N.C. Max. switched voltage: 150* VDC Max. carry current: 60 A * If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. UL, CUR 45A at 14VDC res. 10k cycles (1Form A) Material Silver tin oxide Resistance < 100 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) 484-573 mW standard coil 675 mW sensitive coil Max. Continuous Dissipation 4.2W 20°C (68°F) ambient Temperature Rise 50°C (90°F) nominal coil VDC Max. Temperature 155°C (311°F) Dielectric Strength 500 VDC coil to contact (at sea level for 1 min.) 500 VDC between open contacts Insulation Resistance 100 megohms min. at 20°C (68°F), 500 VDC, 50% RH Dropout Greater than 6% of nominal coil voltage Ambient Temperature At nominal coil voltage Operating Storage -40°C (-40°F) to 135°C (275°F) -40°C (-40°F) to 155°C (311°F)) Vibration 10-40 Hz – 1.27 mm DA 40-70 Hz – 50 m/s2 70-100 HZ – 0.5 mm DA 100-500 Hz – 100 m/s2 Shock 20 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 20 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 7/17/08W AZ9701/AZ9711 RELAY ORDERING DATA — STANDARD COIL COIL SPECIFICATIONS Max. Continuous VDC 9.0 ORDER NUMBER Nominal Coil VDC 6 Must Operate VDC 3.3 Coil Resistance Open Sealed* ±10% 19.0 AZ9701–1A–6DT AZ9701–1C–6DT AZ9711–1A–6DET AZ9711–1C–6DET 9 5.1 14.7 12 6.8 19.6 90.0 AZ9701–1A–12DT AZ9701–1C–12DT AZ9711–1A–12DET AZ9711–1C–12DET 24 13.9 39.3 362.0 AZ9701–1A–24DT AZ9701–1C–24DT AZ9711–1A–24DET AZ9711–1C–24DET 51.0 AZ9701–1A–9DT AZ9701–1C–9DT AZ9711–1A–9DET AZ9711–1C–9DET RELAY ORDERING DATA — SENSITIVE COIL COIL SPECIFICATIONS Nominal Coil VDC 6 Must Operate VDC 4.5 Max. Continuous VDC 11.3 ORDER NUMBER Coil Resistance Open Sealed* ±10% 30.0 AZ9701–1A–6DST AZ9701–1C–6DST AZ9711–1A–6DSET AZ9711–1C–6DSET 9 6.8 17.0 68.0 AZ9701–1A–9DST AZ9701–1C–9DST AZ9711–1A–9DSET AZ9711–1C–9DSET 12 9.0 22.6 120.0 AZ9701–1A–12DST AZ9701–1C–12DSTAZ9711–1A–12DSET AZ9711–1C–12DSET 24 19.2 45.2 480.0 AZ9701–1A–24DST AZ9701–1C–24DSTAZ9711–1A–24DSET AZ9711–1C–24DSET *Add suffix “K” to add third yoke pin. MECHANICAL DATA Terminal Dimensions AZ9701 Outline Dimensions and PCB Layout Term. .586 [14.88] .748 [19.0 MAX] .134 [3.4] .909 [23.1 MAX] .213 [5.4] .717 [18.2 MAX] .211 [5.35] .092 [2.33] .147 [3.73] .467 [11.87] .138 Dimensions 3, 5 .070 [1.78] x .032 [.81] 1, 2 .025 [.64] x .048 [1.22] 4 .048 [1.22] x .063 [1.6] .148 [3.75] .161 [4.08] .483 [12.28] 4 4 2 1 AZ9711 Outline Dimensions and PCB Layout .586 [14.88] .866 [22.0 MAX] 1.043 [26.5 MAX] .176 [4.47] 4 .092 [2.33] 4 2 .467 [11.87] .148 [3.75] .161 [4.08] .483 [12.28] .142 [3.6 MAX]] FORM A .211 [5.35] .268 [6.81] .878 [22.3 MAX] 4 5 Optional 3rd Yoke Termminal 1 3 4 5 FORM C Viewed towards terminals Viewed towards terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" 7/17/08W