ABF22 THRU ABF210 SINGLE PHASE 2.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface mount application Plastic material-UL flammability 94V-0 ABF 0.165(4.2) 0.150(3.8) 0.268(6.8) 0.236(6.0) 0.010(0.25) 0.006(0.15) 0.268(6.8) 0.236(6.0) 0.181(4.6) 0.165(4.2) Mechanical Data · Case: SOPA-4, molded plastic · Terminals: plated leads solderable per 0.032(0.7) 0.024(0.5) MAX 0.0078(0.2) MIL-STD-202, Method 208 · Polarity: as marked on case · Mounting position: Any · Marking: type number 0.209(5.3) 0.189(4.8) 0.051(1.3) 0.039(1.0) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL ABF22 ABF24 ABF26 ABF28 ABF210 UNITS VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRWM RMS Reverse Voltage VRMS 200 400 600 800 1000 V 140 280 420 560 700 V VDC @TA =50℃ Average Rectified Output Current IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 60 A Forward Voltage per element VFM 1.1 V IR 5.0 500 uA RθJA 62.5 RθJL 25 TJ,TSTG -55to+150 Peak Reverse Current At Rated DC Blocking Voltage @IF=2.0A @TA =25℃ @TA =125 ℃ Typical Thermal Resistance per leg Operating and Storage Temperature Range version:01 1 of 2 ℃/W ℃ www.dyelec.com ABF22 THRU ABF210 FIG.2 YPICAL FORWARD CHARACTERISTICS 10 2.4 2.0 1.6 1.2 0.8 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.4 0.00 100 50 150 INSTANTANEOUS FORWARD CURRENT,(A) AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 1.0 0.1 T A=25 ℃ PULSE WIDTH:300us 2% DUTY CYCLE 0.01 AMBIENT TEMPERATURE ( oC) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Fig. 4 T ypical Reverse Characteristics (per element) FIG.33 MXIMUM NON-REPETITIVE SURGE CURRENT 60 50 40 30 20 SINGLE HALF-SINE-WAVE (JEDEC METHOD) 10 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz IR, INSTANTANEOUS REVERSE CURRENT (µA) PEAK FORWARD SURGE CURRENT (A) FORWARD VOLTAGE (V) 100 TJ = 125°C 10 1.0 TJ = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) version:01 2 of 2 www.dyelec.com