Diodes SMD Type PIN Diodes BAR64-04/05/06-HF (KAR64-04/05/06-HF) SOT-23-3 Unit: mm 0.4 +0.2 2.9 -0.1 +0.1 0.4 -0.1 3 ■ Features +0.2 1.6 -0.1 +0.2 2.8 -0.1 ● High voltage current controlled 1 0.55 ● RF resistor for RF attenuator and swirches ● Freqency range above 1 MHz 2 +0.02 0.15 -0.02 +0.1 0.95 -0.1 +0.1 1.9 -0.2 ● Low resistance and short carrier lifetime 1.1 +0.2 -0.1 ● For frequencies up to 3 GHz BAR64-HF 0-0.1 Pb−Free Lead Finish BAR64-06-HF BAR64-05-HF +0.1 0.68 -0.1 ● Pb−Free Package May be Available. The G−Suffix Denotes a BAR64-04-HF ■ Absolute Maximum Ratings Ta = 25℃ Symbol Rating Unit Peak Reverse Voltage Parameter VR 200 V Forward Current IF 100 mA PD 250 mW Power Dissipation BAR64-HF @ Ts≤ 90°C BAR64-04/05/06-HF @ Ts ≤ 65°C Thermal Resistance Junction to Ambient BAR64-HF BAR64-04/05/06-HF Thermal Resistance Junction to Soldering Point BAR64-HF BAR64-04/05/06-HF RθJA RθJS 320 500 ℃/W 240 340 Junction Temperature TJ 150 Operating Temperature Range Top -55 to 150 Storage Temperature range Tstg -55 to 150 ℃ ■ Electrical Characteristics Ta = 25℃ Parameter Symbol Test Conditions Min Typ Max Reverse breakdown voltage VR IR= 100uA Forward voltage VF IF= 50 mA 1.1 IR1 VR=200 V 10 IR2 VR= 40V 1 IF = 1 mA, f = 100 MHz 20 IF = 10 mA, f = 100 MHz 3.8 IF = 100 mA, f = 100 MHz 1.35 Reverse voltage leakage current Forward resistance rf Series inductance LS IF = 10 mA, f = 100 MHz Capacitance between terminals CT VR= 20 V, f= 1 MHz Reverse recovery time trr IF=10mA ,IR=6mA ,IR=3mA 200 1.4 V uA Ω nH 0.35 1.55 Unit pF us www.kexin.com.cn 1 Diodes SMD Type PIN Diodes BAR64-04/05/06-HF (KAR64-04/05/06-HF) ■ Marking NO BAR64-HF Marking PO F BAR64-04-HF PP F BAR64-05-HF BAR64-06-HF PR F PS F ■ Typical Characterisitics Forward current rF= f (TS;TA*) BAR64-HF * mounted on alumina Forward current rF= f (TS;TA*) per each diode BAR64-05,-05,-06-HF mA mA TS IF 2 www.kexin.com.cn I TA TS TS TA F TA TS TA Diodes SMD Type PIN Diodes BAR64-04/05/06-HF (KAR64-04/05/06-HF) ■ Typical Characterisitics Permissible pulse load RthJS = f (tp) BAR64-HF Permissible pulse load Ifmax/If DC=f(tp) BAR64-HF K/W Permissible pulse load RthJS= f (tp) BAR64-04,-05,-06-HF Permissible pulse load IFmax/IFDC = f (tp) BAR64-04,-05,-06-HF K/W www.kexin.com.cn 3 Diodes SMD Type PIN Diodes BAR64-04/05/06-HF (KAR64-04/05/06-HF) ■ Typical Characterisitics Forward resistance rf= f (IF) f = 100 MHz Diode capacitance CT= f (VR) f = 1 MHz. Forward current IF=f(VF) . 4 www.kexin.com.cn