Light Touch Switches/EVPAE 4.5 mm҂2.2 mm Side-operational Edge Mount Light Touch Switches Type: EVPAE ■ Features ● External dimensions : 4.5 mm҂2.25 mm (Excluding the push plate), Height 2.9 mm (Printed circuit board being as low as 0.95 mm) ● Improved soldering strength in the operating direction ● Long operational life ● Measure against electro static discharge(ESD) ■ Recommended Applications ● Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders Portable audio players, etc.) ■ Explanation of Part Numbers 1 2 3 4 5 E V P A E Product Code 6 Type 7 8 9 Height ■ Specifications Type Snap action / Push-on type SPST Rating 10 µA 2 Vdc to 20 mA 15 Vdc (Resistive load) Contact Resistance Electrical 1000 m액 max. Insulation Resistance 100 M액 min. (at 100 Vdc) Dielectric Withstanding Voltage 250 Vac (1 minute) Bouncing 10 ms max. (ON, OFF) Operating Force 1.6 N, 3.0 N Mechanical Push Travel Push Strength 50 N (1 minute) Endurance Operating Life 200000 cycles min. 0.15 mm Operating Temperature –40 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 3500 pcs. Embossed Taping (Reel Pack) Quantity/Carton 17500 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES108 – 00 Oct. 2012 Light Touch Switches/EVPAE ■ Dimensions in mm (not to scale) 1 1 2 1' +00.5 –0.10 Circuit Diagram 0 +00.8 –0.05 0.95 +0.08 +0.2 1.7 –0.1 Dimensions for reference 1.5±0.1 0.8±0.1 R0.3 max. 2 1 1' 2.2 +0.2 +0.2 4.8 –0 3.1±0.1 R0.3 to R0.5 2-0.25 max. (0.2tpy) 1±0.1 0.3±0.1 2-0.6±0.1 0.6±0.1 0.08 +00.7 0 0.4 max. (0.3tpy) 1.65±0.1 0.4 max. (0.3tpy) 3.3 3.6 –0.1 2.6 –0.1 1' 0.55 2.9 1.5 4.5 2.2 2 1.35±0.1 EVPAE 2-0.25 max. 3.8 +0.1 0 5.6±0.1 Note : Please put your consideration not to let any burrs of printed wiring board stick out from PWB land pattern for reference the mounting surface of our switches. Push plate side (2.3) ✻ Height from surface of PCB : 0.95 mm Part Numbers Operating Force Height Push Plate Color EVPAEBB2A 1.6 N 0.95 mm Black 200000 cycles EVPAEDB2A 3.0 N 0.95 mm Black 200000 cycles ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. 230 180 Tape width=12.0 mm t1 Feeding hole Chip pocket P2 P0 φD0 E 150 F W A B Operation Top (°C) MAX. 260 Operating Life (Normal Temp.) t2 90±30 P1 Chip component Tape running direction 40±10 Soldering Time (s) Unit: mm Part No. Height A B W EVPAE 2.9 5.5±0.2 2.9±0.2 12.0±0.3 F E P1 5.5±0.1 1.75±0.10 8.0±0.1 P2 P0 D0 Dia 2.0±0.1 4.0±0.1 1.5 +0.1 0 t1 t2 0.3±0.1 3.3±0.20 ● Standard Reel Dimensions in mm (not to scale) T E Item C A B C D E φ13.0±0.5 φ21.0±1.0 2.0±0.5 T t r 17.5±1.0 — — B Rate (mm) φ380.0±2.0 φ80.0±1.0 Item D r W Rate (mm) 13.5±1.0 A W t Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES109 – 00 Oct. 2012