Embedded Power for Business-Critical Continuity Rev. 05.18.11_108 AD50 Medical Series 1 of 2 AD50 Medical Series 50 Watts Total Power: Input Voltage: # of Outputs: 50 Watts 90 - 264 VAC Single Electrical Specifications Special Features • Universal AC input • Fully regulated output • EN61000-3-2 compliant • Input power < 74 watts • Overcurrent and overvoltage protection • High efficiency • High MTBF • IEC320 AC input receptacle 3 pin (type C6) - AD5012N3LM 2 pin (type C8) - AD5012N2LM • Built in EMI filter • (CISPR 22 Class B) • AC input fuse • Complies with One Watt Input Energy Star / Blue Angel Requirement Input Input range: Frequency: Inrush current: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90 - 264 Vac (wide range) 47 - 63 Hz 60 A maximum @ 230 VAC, cold start 25 °C 2 A maximum 80% typical FCC Part 15, Class B & EN55022 (CISPR 22) Class B 300 µA maximum @ 50/60 Hz, 264 VAC input - AD5012N3L 100 µA maximum @ 50/60 Hz, 264 VAC input - AD5012N2L Output 50 W Maximum Power (Po): 17 ms. minimum at full load @ 100 Vac, 47 Hz Hold-up time: Overvoltage protection: 16 - 20 V Latching type, recycle AC to reset. Overcurrent protection: Output short circuit protection auto recover Overload protection @ 110 - 120% above maximum rating DC cable with 2.5 mm x 5.5 mm barrel plug Cable/connector : DC plug center +v DC plug outer -v Environmental Specifications Safety CSAUL CSA VDE UL 60601-1 60601-1 60601-1 Operating temperature: 5° to +40 °C ambient Storage temperature: Electromagnetic susceptibility: -40 °C to +70 °C Designed to meet EN61000-4-2, -4, -5, level 4; EN61000-4-3, -6, 10v/m; EN61000-4-8, -11; EN61000-3-3 and EN61000-3-2 Class A Humidity: Operating; non-condensing 10% to 90% RH MTBF demonstrated: > 300,000 hours at full load and 25 °C ambient conditions Embedded Power for Business-Critical Continuity Americas Ordering Information Model Number AD5012N3LM AD5012N2LM AD5012N2LM-0001 Maximum Power 50 W 50 W 50 W Output Voltage 12.5 Vdc 12.5 Vdc 12.5 Vdc Maximum Load Peak Load1 Regulation2 4.16 A 4.16 A 4.16 A 6A 6A 6A ± 5% ± 5% ± 5% Ripple P/P (PARD)3 < 500 mV < 500 mV < 500 mV 1. Peak current lasting 200ms every 3 seconds. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 1.61˝ (41) Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 1.61˝ (41) Mechanical Drawing Rev. 05.18.11_108 AD50 Medical Series 2 of 2 For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower 0.4˝ @emerson.com (10.5) 4.72˝ (120) 4.72˝ (120) 0.4˝ (10.5) 48˝ (1219 ±20) 14.57˝ (370 ±20) While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Right Angle Connector C8 Connectivity C6 DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls AD5012N2LM-0001 Precision Cooling Racks & Integrated Cabinets Notes: 1. Specifications subject to change without notice. Services 2.56˝ (65) 2.56˝ (65) 2. All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm) 3. Warranty: 2 year 4. Weight: 0.61 lb./ 0.28 kg 5. AC input power cord sold separately. 6. Specifications at factory settings at 115 VAC input, 25 °C unless otherwise stated 7. AC Input Connector: IEC320, C6 or C8, mate with C5 and C7 respectively. Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co.