Power-One AS1001-7R 100 watt dc-dc converter Datasheet

S Series
100 Watt DC-DC Converters
Wide input voltage ranges from 8...385 V DC
1or 2 isolated outputs up to 48 V DC
4 kV AC I/O electric strengh test voltage
LGA
• Rugged electrical and mechanical design
• Fully isolated outputs
• Operating ambient temperature range
–40...71°C with convection cooling
Selection chart
Output 1
Uo nom
Io nom
[V DC]
[A]
5.1
16
12
8
15
6.5
24
4.2
24
4
30
3.2
48
2
12
4
15
3.2
24
2
Output 2
Uo nom Io nom
[V DC]
[A]
12
4
15
3.2
24
2
Type
Input Voltage
8...35 V DC
AS 1001-7R
AS 1301-7R
AS 1501-7R
AS 1601-7R
AS 2320-7R
AS 2540-7R
AS 2660-7R
AS 2320-7R
AS 2540-7R
AS 2660-7R
Type
Input Voltage
14...70 V DC
BS 1001-7R
BS 1301-7R
BS 1501-7R
BS 1601-7R
BS 2320-7R
BS 2540-7R
BS 2660-7R
BS 2320-7R
BS 2540-7R
BS 2660-7R
Type
Input Voltage
20...100 V DC
FS 1001-7R
FS 1301-7R
FS 1501-7R
FS 1601-7R
FS 2320-7R
FS 2540-7R
FS 2660-7R
FS 2320-7R
FS 2540-7R
FS 2660-7R
Output 1
Uo nom
Io nom
[V DC]
[A]
5.1
16
12
8
15
6.5
24
4.2
24
4
30
3.2
48
2
12
4
15
3.2
24
2
Output 2
Uo nom Io nom
[V DC]
[A]
12
4
15
3.2
24
2
Type
Input Voltage
28...140 V DC
CS 1001-7R
CS 1301-7R
CS 1501-7R
CS 1601-7R
CS 2320-7R
CS 2540-7R
CS 2660-7R
CS 2320-7R
CS 2540-7R
CS 2660-7R
Type
Input Voltage
44...220 V DC
DS 1001-7R
DS 1301-7R
DS 1501-7R
DS 1601-7R
DS 2320-7R
DS 2540-7R
DS 2660-7R
DS 2320-7R
DS 2540-7R
DS 2660-7R
Type
Input Voltage
67...385 V DC
ES 1001-7R
ES 1301-7R
ES 1501-7R
ES 1601-7R
ES 2320-7R
ES 2540-7R
ES 2660-7R
ES 2320-7R
ES 2540-7R
ES 2660-7R
www.power-one.com
Options
-9, E, D, V, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
Options
-9, E, D, V, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
-9, E, D, P, T, B1
1
Cassette Style
S Series
Input
Input voltage
Inrush current limitation
6 wide-input ranges (1:5)
FS, CS, DS, ES by thermistor
refer to selection chart
Output
Efficiency
Output voltage setting accuracy
Output voltage switching noise
Line regulation
Load regulation
Minimum load
Current limitation
Operation in parallel
Hold-up time
Ui nom, Io nom
up to 86%
Ui nom, Io nom
±0.6% Uo nom
IEC/EN 61204, total
typ. 100 mVpp
Ui min…Ui max, Io nom
typ. ±0.3% Uo nom
Ui nom, 10...100% Io nom, symmetrical output load typ. 0.4% Uo nom
not required
0A
rectangular U/I characteristic
typ. 110% Io nom
by current limitation
Ui nom, Io nom, CS/DS/ES/FS with ext. diode in input line 12...40 ms
Ui nom, Io nom, AS/BS with ext. diode in input line
typ. 1.8 ms
Control and protection
Input reverse polarity
Input undervoltage lockout
Input overvoltage lockout
Input transient protection
Output
Output overvoltage
Overtemperature
Output voltage adjustment
Inhibit
Status indication
built-in fuse not user accessible
typ. 80% Ui min
typ. 108% Ui max
varistor or suppressor diode
no-load, overload and short circuit proof
suppressor diode in each output
switch-off with auto restart
typ. 130% Uo nom
TC typ. 100°C
0...110% Uo nom
TTL input, output(s) disabled if open circuit
LEDs: OK, inhibit, overload
Safety
Approvals
Class of equipment
Protection degree
Electric strength test voltage
EN 60950, UL 1950, CSA 22.2 No. 950
I/case
I/O
O/case
O/O
class I
IP 30
2 kV AC
4 kV AC
1 kV AC
0.1 kV AC
IEC/EN 61000-4-2, level 4 (8/15 kV)
IEC/EN 61000-4-3, level x (20 V/m)
IEC/EN 61000-4-4, level 4 (2/4 kV)
IEC/EN 61000-4-5, level 3 (2 kV)
IEC/EN 61000-4-6, level 3 (10 V)
CISPR 22/EN 55022, conducted
criterion A
criterion A
criterion A
criterion A
criterion A
class B
EMC
Electrostatic discharge
Electromagnetic field
Electr. fast transients/bursts
Surge
Conducted disturbances
Electromagnetic emissions
www.power-one.com
2
S Series
100 Watt DC-DC Converters
Environmental
Operating ambient temperature
Operating case temperature TC
Storage temperature
Damp heat
Vibration, sinusoidal
Shock
Bump
Random vibration
MTBF
Ui nom, Io nom, convection cooled
Ui nom, Io nom
non operational
IEC/EN 60068-2-3, 93 %, 40 °C
IEC/EN 60068-2-6, 10...60/60...2000 Hz
IEC/EN 60068-2-27, 6 ms
IEC/EN 60068-2-29, 6 ms
IEC/EN 60068-2-64, 20...500 Hz
MIL-HDBK-217F, GB, 40°C
–25...71°C
–25...95°C
–40...100°C
56 days
0.35 mm/5 gn
100 gn
40 gn
4.9 gn rms
500'000 h
Options
Extended temperature range
–40...71°C, ambient, operating
Electronic inrush current limitation
Output voltage adjustment
40...110% Uo nom, excludes feature R and vice versa
Input and/or output undervoltage monitoring, excludes option V
Input and/or output undervoltage monitoring (VME), excludes option D
Current sharing
Cooling plate
-9
E
P
D0…D9
V0, V2, V3
T
B1
Pin allocation
Pin
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
Vo1+
Vo1+
Vo1–
Vo1–
S+
S–
R
i
D
V
T
Vi+
Vi+
Vi–
Vi–
AS...ES 1000
Output 1
Vo2+
Vo2+
Vo2–
Vo2–
Vo1+
Vo1–
R
i
D
Output 1
Sense
Sense
Control of Uo1
Inhibit
Save data
ACFAIL
Current sharing
Protective earth
Input
T
Vi+
Vi+
Vi–
Vi–
Input
AS...ES 2000
Output 2
Output 2
Output 1
Control of Uo1
Inhibit
Save data
Current sharing
Protective earth
Input
Input
S10002
30 26 22 18 14 10
32 28 24 20 16 12
www.power-one.com
6
8
4
3
Cassette Style
S Series
Mechanical data
Tolerances ±0.3 mm (0.012") unless otherwise indicated.
European
Projection
171.93 (DIN 41494) (6.77")
7 TE
5 TE
Test jacks
Option P (Uo)
Option D (Uto)
Option D (Uti)
111 (3U) 4.37")
Measuring point of
case temperature TC
100 (3.93")
M4
152 (5.98")
LED i
LED OK
LED IoL
168.5 (6.63")
25.9
(1.02")
09004
11.8 (0.46")
60 (2.36")
Accessories
Front panels 19" (Schroff/Intermas)
Mating H15 connectors with screw, solder, fast-on or press-fit terminals
Connector retention facilities and code key system for connector coding
Chassis or wall mounting plates for frontal access
Universal mounting brackets for chassis or DIN-rail mounting
www.power-one.com
4
Similar pages