DC Common Mode Choke Coil <SMD Type:CPFC Series> Type: CPFC54 ◆ Product Description ・9.5×5.65mm Max.(L×W), 4.90mm Max. Height . ◆ Feature ・Ideally used in xDSL, Modem and telecom applications. ・RoHS Compliance. ◆ Dimensions (mm) 9.50 Max. 4.90 Max. 5.50 Ref. Pin 1 1 4 2 3 . xa M 56 .5 03 .0 1 × 0 5. 0 ＊ Dimensions without tolerance are approx. ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ◆ Land Pattern (mm) 3 2 4 5 . 2 4 Adhesive ◆ Schematics (Bottom) 2.9 1 4 2 3 4 5 . 2 2. 1 7.3 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 DC Common Mode Choke Coil <SMD Type:CPFC Series> Type: CPFC54 ◆ Specification Ω ※ D.C.R(m ) Typ. 1-4 or 2-3 (at 20 ) （ ）（ ） ℃ （1，4-2，3） 50 900 100 250 50 700 120 250 150 700 130 250 1500 700 130 250 200 600 160 250 2000 600 160 250 200 500 230 250 200 500 200 750 250 500 200 750 +50% 250 400 400 750 +50% 300 200 650 750 Inductance (µH) (1-4) or (2-3) 1 Part Name Stamp CPFC54-050C 050C CPFC54-110C 110C CPFC54-250C 250C CPFC54-250S 250S CPFC54-510C 510C CPFC54-510S 510S CPFC54-101C 101C CPFC54-471C 471C CPFC54-102C 102C 1000-30% CPFC54-222C 222C 2200 -30% CPFC54-472C 472C 4700 -30% ※ 5±30% 11±30% 25±30% 25±30% 51±30% 51±30% 100±30% 470±30% +50% LS(nH)Typ. 1-4(2+3 short) 2 ※ IR(mA)1-2 (3+4short) 3 Hipot (V) DC 2s 0.5mA ※1、※2 Measuring condition 100kHz, 0.1V ※3 . I :DC current when temperature of coil increased up to 40℃.(Ta=20℃) R Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2