SAW Components SAW IF Filter W-CDMA base station, Rx Series/Type: Ordering code: B5026 B39191-B5026-H510 Date: Version: Jun 06, 2006 2.1 EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B5026 190.00 MHz Low-Loss Filter Data Sheet Application ■ Low-loss IF filter for W-CDMA base station, receive path (Rx) ■ Unbalanced or balanced operation possible ■ High near-by selectivity ■ Temperature stable Features 7,62 1,0 mm3 Package size 13.3 x 6.5 x 1.6 Package code DCC12A RoHS compatible Approx. weight 0.4 g Ceramic package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ Electrostatic Sensitive Device (ESD) ■ Filter surface passivated 3 2,3 10 9 8 1,6 Input Input ground Output Output ground To be grounded Case ground Please read cautions and warnings and important notes at the end of this document. 7 6 3,81 Pin configuration 10 1 5 6 3,8 2,4,7,9 5 bottom view side view top view 13,3 ■ ■ ■ ■ ■ ■ 4 1,7 2 6,5 ■ ■ ■ ■ ■ 1 2 Jun 06, 2006 SAW Components B5026 190.00 MHz Low-Loss Filter Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T = ZS = ZL = -30 to +85 ˚C 50 Ω and matching network 50 Ω and matching network min. Nominal frequency fN — typ. @ 25˚C 190.0 Minimum insertion attenuation (including matching network) αmin — 12.0 15.0 3.84 — 4.2 4.8 — — Passband width αrel ≤ 1 dB B1dB αrel ≤ 30 dB B30dB max. — MHz dB MHz MHz Amplitude ripple (p-p) fN ± 1.92 MHz ∆α — 0.7 1.0 dB Phase ripple (rms) fN ± 1.92 MHz ∆ϕ — 1.0 1.5 ˚ rms 1688 1693 1698 ns — 2.0 — % — 50 — dB 32 37 40 38 42 45 — — — dB dB dB Absolute group delay τ mean value within fN ± 1.92 MHz at 25 ˚C 1) Error vector magnitude fN ± 1.92 MHz EVM Adjacent channel suppression fN ± 3.08 MHz ... fN ± 6.92 MHz ACS Relative attenuation (relative to αmin) fN ± 2.515 MHz...fN ± 3.08 MHz fN ± 3.08 MHz...fN ± 3.5 MHz fN ± 3.5 MHz...fN ± 20 MHz αrel Temperature coefficient of frequency 2) Turnover temperature TCf — –0.036 — ppm/K2 T0 — 20 — ˚C 1) 2) At other temperatures the variation from filter to filter is also restricted to +/- 5 ns. From -30 ... +85 ˚ C the variation of mean value of group delay is restricted to +/- 10 ns. Temperature dependance of fc: fc(TA) = fc(T0) (1 + TCf(TA – T0)2) Maximum ratings Operable temperature range T –40/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 3 V Input Power(passband) Input Power(stopband) PIN PIN 10 20 dBm dBm Please read cautions and warnings and important notes at the end of this document. 3 fN ± 5 MHz...fN ± 70 MHz Jun 06, 2006 SAW Components B5026 190.00 MHz Low-Loss Filter Data Sheet Matching network to 50 Ω Element values depend upon board layout. Ls2 Lp1 = 39 nH Ls5 Ls2 = 82 nH Lp3 = 56 nH Lp1 Lp4 Lp3 Lp6 Lp4 = 100 nH Ls5 = 82 nH Lp6 = 33 nH Alternative matching network to 50 Ω Element values depend upon board layout. Cp1 = 68 pF Ls2 = 39 nH Cp3 = 2.2 pF Cp4 = 1.8 pF Ls5 = 56 nH Cp6 = 56 pF Please read cautions and warnings and important notes at the end of this document. 4 Jun 06, 2006 SAW Components B5026 190.00 MHz Low-Loss Filter Data Sheet Transfer function Transfer function (passband) Please read cautions and warnings and important notes at the end of this document. 5 Jun 06, 2006 SAW Components B5026 190.00 MHz Low-Loss Filter Data Sheet Type B5026 Ordering code B39191-B5026-H510 Marking and Package C61157-A7-A94 Packaging F61074-V8163-Z000 Date Codes L_1126 S-Parameters Soldering profile S_6001 For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 6 Jun 06, 2006 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 7 Jun 06, 2006