STATEK CX4HGSM High shock, ultra-miniature, low profile surface mount at quartz crystal Datasheet

CX4HGSM AT CRYSTAL
14 MHz to 50 MHz
High Shock, Ultra-Miniature, Low Profile
Surface Mount AT Quartz Crystal
DESCRIPTION
Intended for applications requiring shock survivability up to
100,000 g, Statek’s surface-mount CX4HGSM crystals
are high-shock versions of the CX4SM crystals.
FEATURES
actual size
XX
SXX
glass lid
side view
ceramic lid
PACKAGE DIMENSIONS
High shock and vibration resistance
D
Designed for surface mount applications using
infrared, vapor phase, or epoxy mount techniques.
Low profile (less than 1.2 mm) hermetically sealed
ceramic package
Available with glass or ceramic lid
TOP
A
F
BOTTOM
Custom designs available
Full military testing available
Designed and manufactured in the USA
B
TYPICAL
APPLICATIONS
Industrial & Communications
Down-hole Data Recorder
Process Control
Environmental Control
Engine Control
Telemetry
Ruggedized Instrumentation
Automotive Control
C
E
D
MAXIMUM
DIM
inches
mm
inches
mm
A
0.197
5.00
0.210
5.33
B
0.072
1.83
0.085
2.16
C
—
—
D
0.036
0.91
0.046
1.16
E
0.020
0.51
—
—
F
0.025
0.64
—
—
see below
Military & Aerospace
Smart Munitions
Timing Devices (Fuzes)
THICKNESS (DIM C) MAXIMUM
Surveillance Devices
GLASS LID
Missile Telemetry
Ruggedized Communications
Aviation Equipment
CERAMIC LID
inches
mm
inches
mm
SM1
0.045
1.14
0.050
1.27
SM2/SM4
0.046
1.17
0.051
1.30
SM3/SM5
0.048
1.22
0.053
1.35
10165 Rev B
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
SPECIFICATIONS
Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice.
Fundamental Frequency
14.7456 MHz
16MHz
20 MHz
32 MHz
40 MHz
Motional Resistance R1 (Ω)
Motional Capacitance C1 (fF)
Quality Factor Q (k)
Shunt Capacitance C0 (pF)
Frequency Range1
60
1.4
120
0.8
75
1.5
90
0.9
50
1.4
110
0.9
14 MHz to 50 MHz
+
_
100 ppm, or tighter as required
10 pF (unless specified otherwise)
Drive Level
200 µW MAX
Frequency-Temperature
Stability2,3
Aging, first year
+
_
50 ppm to
+
_
100 ppm to
+
_
100 ppm to
Designation
SM1
SM2
+
_ 10 ppm (Commercial) SM3
+
_ 20 ppm (Industrial)
SM4
+
SM5
_ 30 ppm (Military)
10 ppm MAX
4
Shock, survival
Termination
Gold Plated (Lead Free)
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
Max Process Temperature
Up to 100,000 g, 0.5 ms,
1/
2
sine
Vibration, survival
20 g, 10-2,000 Hz swept sine
Operating Temp. Range
-10OC to +70OC (Commercial)
Storage Temp. Range
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
-55OC to +125OC
Max Process Temperature
260OC for 20 sec
5
30
1.5
90
1.0
TERMINATIONS
Calibration Tolerance
Load Capacitance
2
30
2.5
70
1.1
260OC for 20 sec
EQUIVALENT CIRCUIT
C0
1
1. Other frequencies available. Contact factory.
2. Other tolerances available. Contact factory.
3. Does not include calibration tolerance. The characteristics of the frequency stability over
temperature follow that of the AT thickness-shear mode.
4. Lower aging available at low shock levels.
L1
C1
R1
2
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
SUGGESTED LAND PATTERN
5. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.
0.059 (1.5)
PACKAGING OPTIONS
0.092 (2.3)
• Tray Pack
• Tape and Reel
Per EIA 481 (see Tape and Reel data sheet 10109)
0.160 (4.0)
inches (mm)
HOW TO ORDER CX4HGSM AT CRYSTALS
CX4
S
HG1
C
SM1 –
“S” if special or
custom design.
Blank if standard
Shock Level
HG1 = 10,000 g
HG2 = 20,000 g
HG3 = 30,000 g
HG4 = 50,000 g
HG5 = 75,000 g
HG6 = 100,000 g
C = Ceramic Lid
Blank = Glass Lid
32.0M
Frequency
M = MHz
Termination
SM1 = Gold Plated
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated
(Lead Free)
SM5 = Solder Dipped
(Lead Free)
,
100
/
Calibration
Tolerance
@25OC
(in ppm)
100
/
—
Frequency
Stability over
Temp. Range
/
—
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
OR
—
/
200
Total
Frequency
Tolerance
(in ppm)
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
10165 Rev B
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
Similar pages