Chokes Drum Core Inductor CBP1251 The CBP1251 series Inductors are wound on “Drum” style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies. • • • • • High DC levels. Compact size. Low loss Ferrite material. Cost effective. Available with heat shrink vinyl cover. • Other applications include: Line Filters, Speaker Crossover Networks, SCR and Triac Controls etc. MECHANICAL Dimensions, Inches (mm) A 0.66 B 0.84 C Hole to clear No. 4/40 screw E See Electrical Specs. table. ELECTRICAL SPECIFICATION ISSUE A CBP1251 91/04/15 Part No. Ind. (1) Max DCR I DC (2) I Rated (3) E ± 10% (µH) (Ω) (Amp) DC (Amp) RMS (Nom.) Part No. Ind. (1) Max DCR I DC (2) I Rated (3) E ± 10% (µH) (Ω) (Amp) DC (Amp) RMS (Nom.) CBP1251-10G CBP1251-12G CBP1251-15G CBP1251-18G 1.0 1.2 1.5 1.8 0.003 0.003 0.004 0.004 87.0 68.0 56.0 56.0 9.0 9.0 9.0 9.0 0.55 0.55 0.55 0.55 CBP1251-470 CBP1251-560 CBP1251-680 CBP1251-820 47.0 56.0 68.0 82.0 0.062 0.069 0.077 0.083 11.0 10.0 8.9 8.2 2.8 2.8 2.8 2.8 0.47 0.48 0.50 0.50 CBP1251-22G CBP1251-27G CBP1251-33G CBP1251-39G 2.2 2.7 3.3 3.9 0.005 0.005 0.005 0.006 47.0 47.0 40.0 36.0 9.0 9.0 9.0 9.0 0.55 0.55 0.55 0.55 CBP1251-101 CBP1251-121 CBP1251-151 CBP1251-181 100.0 120.0 150.0 180.0 0.095 0.013 0.081 0.217 7.5 5.8 5.6 5.1 2.8 2.0 1.6 1.6 0.50 0.48 0.48 0.48 CBP1251-47G CBP1251-56G CBP1251-68G CBP1251-82G 4.7 5.6 6.8 8.2 0.007 0.007 0.008 0.009 32.0 29.0 26.0 24.5 9.0 9.0 9.0 9.0 0.55 0.55 0.55 0.55 CBP1251-221 CBP1251-271 CBP1251-331 CBP1251-391 220.0 270.0 330.0 390.0 0.240 0.300 0.336 0.460 4.3 4.1 3.8 3.3 1.6 1.6 1.3 1.0 0.48 0.48 0.48 0.48 CBP1251-110 CBP1251-120 CBP1251-150 CBP1251-180 10.2 12.0 15.0 18.0 0.010 0.011 0.015 0.016 21.2 19.0 17.5 16.5 9.0 9.0 7.2 7.2 0.55 0.55 0.50 0.50 CBP1251-471 CBP1251-561 470.0 560.0 0.636 0.696 3.2 2.9 0.8 0.8 0.45 0.45 CBP1251-220 CBP1251-270 CBP1251-330 CBP1251-390 22.0 27.0 33.0 39.0 0.020 0.030 0.040 0.046 15.8 14.4 13.2 11.8 5.5 4.5 4.0 4.0 0.50 0.50 0.41 0.47 NOTES 1) Tolerances on values below 10 µH are ± 20%. 2) I DC is the current for which the Inductance is reduced by appr. %5 of its initial value. 3) I RATED is the current (RMS), limited by the copper loss and the guage of the wire in the winding. An ISO 9001 Registered Company 229 Colonnade Road, Nepean, Ontario, Canada K2E 7K3 Tel: (613) 226-1626 Fax: (613) 226-7124 www.filtran.com 31-1